{"title":"Automotive Clear Coat","description":"\u003cp\u003eAerosol and gun-ready clear coats, including two-component 2K cans such as SprayMax that cure hard enough to wet-sand and polish. 2K aerosols are single-use once activated and need proper respiratory protection.\u003c\/p\u003e\u003cp\u003e34 products in stock from 19 brands, priced from $59.39 to $288 CAD. Every order ships free to any Canadian address, priced in CAD with no minimum.\u003c\/p\u003e\u003ch2\u003eBrands in Automotive Clear Coat\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/brand-spraymax\"\u003eSprayMax\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eKBS Coatings\u003c\/li\u003e\n\u003cli\u003eSEM\u003c\/li\u003e\n\u003cli\u003ePRISMATIC POWDERS\u003c\/li\u003e\n\u003cli\u003eLiME LiNE\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/brand-carpro\"\u003eCARPRO\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRelated collections\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/paints-and-primers\"\u003ePaints and Primers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/paint-and-paint-supplies\"\u003ePaint and Paint Supplies\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment and specification details on each product page come from the manufacturer. Check them against your vehicle before ordering. See all \u003ca href=\"\/pages\/shop-by-category\"\u003ecategories\u003c\/a\u003e, \u003ca href=\"\/pages\/shop-by-brand\"\u003ebrands\u003c\/a\u003e and \u003ca href=\"\/pages\/shop-by-vehicle\"\u003evehicles\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo you ship Automotive Clear Coat products across Canada?\u003c\/h3\u003e\u003cp\u003eYes. Shipping is free to every Canadian province and territory, with no minimum order value. Orders are dispatched within one business day and prices are shown in Canadian dollars.\u003c\/p\u003e\u003ch3\u003eHow many Automotive Clear Coat products do you stock?\u003c\/h3\u003e\u003cp\u003eThis collection currently holds 34 products from 19 brands, including SprayMax, KBS Coatings, SEM. Prices run from $59.39 to $288 CAD.\u003c\/p\u003e\u003ch3\u003eHow do I know a part will fit my vehicle?\u003c\/h3\u003e\u003cp\u003eEach product page lists the fitment details supplied by the manufacturer: year, make, model or universal fit. Check those against your vehicle before ordering, and email us if a listing is unclear.\u003c\/p\u003e\u003ch3\u003eWhat is your return policy?\u003c\/h3\u003e\u003cp\u003eYou have 30 days from delivery to return an unused item in its original packaging for a refund. Faulty or incorrect items are replaced or refunded in full, including return postage.\u003c\/p\u003e","products":[{"product_id":"kbs-coatings-diamondfinish-watercolor-clear-coat-1-pint-high-gloss-single-part-hard-clear-for-metal-paint","title":"KBS Coatings DiamondFinish Watercolor Clear Coat — 1 Pint High‑Gloss, Single‑Part Hard Clear for Metal \u0026 Paint","description":"\u003cstrong\u003eKBS Coatings 8304 DiamondFinish Watercolor Clear Coat is a single‑part, high‑hardness clear that seals painted surfaces and bare metal while self‑leveling for a smooth, brush‑mark‑free finish.\u003c\/strong\u003e\n\n\u003cp\u003eThis one‑pint clear coat blends industrial durability with easy application. Formulated to go directly onto metal and over existing paint without additives, the DiamondFinish Watercolor Clear delivers a tough, high‑gloss protective layer that resists abrasion and preserves color depth. Because it is single‑component, there’s no mixing of hardeners required—making it a practical choice for one‑person projects, touchups, and small refinishing jobs.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this clear coat behave on metal and painted surfaces?\u003c\/h3\u003e\n\u003cp\u003eThe formula bonds to both bare metal and cured paint, forming a hard, protective film. It seals substrates to reduce corrosion risk on metal and locks in paint pigments for longer color life. Its self‑leveling characteristic smooths out application strokes for an even appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdheres directly to metal without primers in many situations\u003c\/li\u003e\n  \u003cli\u003eCompatible with existing painted finishes for topcoating\u003c\/li\u003e\n  \u003cli\u003eSingle‑part chemistry yields a harder film than many two‑part clears\u003c\/li\u003e\n  \u003cli\u003eSelf‑leveling reduces brush marks and roller texture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat application methods and preparation steps work best?\u003c\/h3\u003e\n\u003cp\u003eDiamondFinish can be brushed, rolled, or sprayed depending on project scale and preference. Surfaces should be clean, dry, and free of loose rust, oils, or contamination; light sanding of glossy paint helps promote adhesion. Follow typical shop practices for ventilation and temperature control to ensure proper flow and cure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrush or roller for small repairs and edges; HVLP\/air spray for larger areas\u003c\/li\u003e\n  \u003cli\u003eRemove grease and dirt, then scuff sand for glossy surfaces\u003c\/li\u003e\n  \u003cli\u003eApply in thin, even coats to avoid runs and improve leveling\u003c\/li\u003e\n  \u003cli\u003eAllow recommended flash times between coats for best hardness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much coverage and durability can I expect from one pint?\u003c\/h3\u003e\n\u003cp\u003eOne pint of this clear coat covers up to about 50 square feet depending on application thickness and surface texture. The cured film is formulated to be tougher and harder than many two‑part clears, offering enhanced resistance to everyday wear, light abrasion, and environmental exposure when applied correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApproximate coverage: up to 50 sq ft per pint under typical coating thickness\u003c\/li\u003e\n  \u003cli\u003eSingle‑part hardness provides robust surface protection\u003c\/li\u003e\n  \u003cli\u003eBest durability when applied in recommended thin coats\u003c\/li\u003e\n  \u003cli\u003eSeals both paint and metal to extend finish life\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? KBS Coatings 8304 DiamondFinish Watercolor Clear Coat is designed for hobbyists, restoration enthusiasts, small body shops, and DIY mechanics who need a no‑fuss topcoat that delivers professional‑grade hardness without mixing hardeners. It’s particularly useful for touchups, custom metalwork, ATV and motorcycle components, toolboxes, and decorative metal projects where a resilient, glossy finish is desired. If you want a clear that seals paint and metal, levels out for a smooth look, and doesn’t require two‑part mixing, this product is built for those scenarios.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply DiamondFinish over existing automotive paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — clean and scuff glossy surfaces first. It bonds to cured paint and seals the finish without extra additives.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this clear require a hardener or reducer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it’s a single‑part formula that doesn’t need added hardeners; thin coats and proper conditions improve curing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KBS Coatings","offers":[{"title":"Default Title","offer_id":48079823372446,"sku":"B00DMIE20Q","price":110.84,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/kbs-coatings-diamondfinish-front-pint.jpg?v=1785771799"},{"product_id":"kbs-coatings-diamondfinish-watercolor-clear-coat-1-quart-32-oz-single-part-non-yellowing-gloss-uv-scratch-resistant","title":"KBS Coatings DiamondFinish Watercolor Clear Coat 1 Quart (32 oz) — Single‑Part, Non‑Yellowing Gloss, UV \u0026 Scratch Resistant","description":"\u003cp\u003e\u003cstrong\u003eKBS Coatings 8404 DiamondFinish Watercolor Clear Coat is a single-component, non-yellowing protective topcoat that delivers diamond-like scratch and weather resistance for indoor and outdoor projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDiamondFinish is formulated to give a crystal-clear, durable film without mixing hardeners, making it convenient for hobbyists, craftsmen, marine applications, and general repair work. It bonds to many substrates — including metal, wood, plastic, fiberglass, and existing painted surfaces — and resists UV, moisture, saltwater, and abrasion so finishes stay bright and clear longer.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clear coat protect surfaces?\u003c\/h3\u003e\n\u003cp\u003eDiamondFinish forms a tough, glossy barrier that absorbs impact and resists scratches better than standard clears. Its weather-resistant chemistry prevents fogging, clouding, and yellowing even under prolonged sun or marine exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh scratch and impact resistance for long-lasting appearance\u003c\/li\u003e\n  \u003cli\u003eDurable against salt spray, humidity, and UV exposure\u003c\/li\u003e\n  \u003cli\u003eMaintains optical clarity — keeps whites and natural grains true\u003c\/li\u003e\n  \u003cli\u003eSeals against moisture and environmental contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo I need a hardener or special measuring to use it?\u003c\/h3\u003e\n\u003cp\u003eNo hardener is required; this is a single-part (one-step) clear coat you stir and apply. That simplifies application and eliminates pot-life or mixing-ratio concerns common with catalyzed systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReady-to-use straight from the can after light stirring\u003c\/li\u003e\n  \u003cli\u003eNo cross-mixing, fewer tools, and reduced setup time\u003c\/li\u003e\n  \u003cli\u003eSmoother workflow for small projects and quick touch-ups\u003c\/li\u003e\n  \u003cli\u003eCompatible with brush, spray gun, or dip applications when thinned per instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and projects are suitable for DiamondFinish?\u003c\/h3\u003e\n\u003cp\u003eIt adheres well to a broad range of materials, making it a versatile topcoat for both hobby and industrial uses. Minimal surface prep is often sufficient, but follow standard cleaning and sanding practices for best adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for fishing lures, automotive trim, boats, and outdoor furniture\u003c\/li\u003e\n  \u003cli\u003eWorks on metal, wood, plastic, fiberglass, and existing paint\u003c\/li\u003e\n  \u003cli\u003eGreat for decorative projects where clarity and non-yellowing are essential\u003c\/li\u003e\n  \u003cli\u003eUseful in marine environments because it resists saltwater and humidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I get a durable, glossy finish with this product?\u003c\/h3\u003e\n\u003cp\u003eProper surface preparation and application technique are key: clean, degrease, and scuff the surface, then apply even coats, allowing recommended flash times between passes. Multiple thin coats build a harder, clearer film than a single heavy coat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRemove oils, dust, and contaminants before coating\u003c\/li\u003e\n  \u003cli\u003eSand lightly or scuff glossy surfaces for better bonding\u003c\/li\u003e\n  \u003cli\u003eApply several thin, even layers with proper drying time\u003c\/li\u003e\n  \u003cli\u003eCan be sanded and buffed after cure for mirror-like shine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KBS Coatings DiamondFinish is designed for makers, restorers, marine owners, and professionals who need a high-clarity, weatherproof topcoat without the complexity of two-part systems. If you want a single-product solution that protects and preserves color and grain while resisting UV, salt, and abrasion, this clear coat is built to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is a separate hardener required?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, DiamondFinish is a single-part formula and does not require a separate hardener.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this clear coat yellow over time?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the non-yellowing formula is designed to remain clear under UV and marine exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KBS Coatings","offers":[{"title":"Default Title","offer_id":48079823569054,"sku":"B00DMIDEMS","price":141.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/kbs-diamondfinish-front-quart.jpg?v=1785771798"},{"product_id":"lime-line-2k-high-gloss-clearcoat-spray-can-pack-of-2-dual-chamber-2-part-automotive-finish-uv-resistant","title":"LiME LiNE 2K High Gloss Clearcoat Spray Can Pack of 2 — Dual-Chamber 2-Part Automotive Finish, UV-Resistant","description":"\u003cp\u003e\u003cstrong\u003eLiME LiNE High Gloss 2K Clearcoat Spray is a two-part, dual-chamber aerosol that delivers a durable, high-gloss automotive finish without a gun or compressor.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need shop-grade protection and shine but want the convenience of a spray can, this 2K clearcoat package gives professional-level results in a compact, easy-to-use format. Each can keeps the clear and activator separate until you activate the built-in dual-chamber system, then shaking mixes the components for a true two-part chemical cure rather than a simple lacquer topcoat.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I activate and mix the 2K clearcoat for reliable results?\u003c\/h3\u003e\n\n\u003cp\u003eActivation is designed to be fast and foolproof: pull the plunger, twist the included ring 360°, then shake the can until the mixing balls blend the two parts. The built-in chambers eliminate separate bottles or measuring, so you get consistent chemistry every time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePull plunger and rotate the activation ring to release the activator into the clear.\u003c\/li\u003e\n  \u003cli\u003eShake vigorously until mixing balls indicate a uniform blend.\u003c\/li\u003e\n  \u003cli\u003eAllow recommended induction time if specified, then spray within pot life window.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat spray patterns and coverage can I expect from the nozzle?\u003c\/h3\u003e\n\n\u003cp\u003eThe adjustable HVLP-style nozzle offers a circular pattern for detail work and a wider oval for larger areas, letting you switch spray geometry without changing equipment. This flexibility reduces runs and ensures uniform film build across trims, panels, and small repairs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCircular jet — precise edge work, trim, and small spots.\u003c\/li\u003e\n  \u003cli\u003eWide oval — fast, even coverage for door skins and hoods.\u003c\/li\u003e\n  \u003cli\u003eConsistent atomization helps reduce orange peel and recoat issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the cured finish and what protections does it provide?\u003c\/h3\u003e\n\n\u003cp\u003eOnce cured, the clearcoat yields high gloss with strong resistance to UV, chemicals, and everyday abrasion typical on road vehicles. It forms a protective barrier that helps preserve paint color and resists light scratching from washes and environmental contaminants.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUV-stable formulation to slow fading and chalking of underlying paint.\u003c\/li\u003e\n  \u003cli\u003eChemical resistance against common automotive fluids and cleaners.\u003c\/li\u003e\n  \u003cli\u003eTough film that withstands light impacts and maintains gloss retention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I get professional results from a spray can?\u003c\/h3\u003e\n\n\u003cp\u003ePreparation and technique matter: sand, clean, and degrease the surface, then apply thin, even coats with proper flash time between passes. The aerosol design simplifies application for mobile repairs, spot refinishing, and hobbyist restorations while still delivering a two-part cured finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUse recommended surface prep: sand to specified grit, tack cloth, and solvent wipe.\u003c\/li\u003e\n  \u003cli\u003eApply multiple light coats rather than one heavy pass to avoid runs.\u003c\/li\u003e\n  \u003cli\u003eObserve pot life and dry\/cure times provided by the manufacturer for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: LiME LiNE High Gloss 2K Clearcoat Spray is aimed at auto body technicians, restoration enthusiasts, mobile detailers, and DIYers who want a genuine two-component finish without a spray gun setup. If you need a compact solution for spot repairs, panel refinishing, or quick protective topcoats that deliver professional durability and shine, this dual-chamber aerosol is built to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long after activation can I spray the clearcoat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Spray after the recommended shake and any short induction time; use within the can's pot life, typically minutes to an hour depending on temperature.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply this over existing single-stage or basecoat paints?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—when properly sanded, cleaned, and compatible with 2K clears; always test adhesion and follow surface prep instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LiME LiNE","offers":[{"title":"Default Title","offer_id":48080677830814,"sku":"B0DZKV1TZ9","price":170.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/lime-line-clearcoat-front-packaging.jpg?v=1785784096"},{"product_id":"lime-line-2k-clear-coat-automotive-topcoat-kit-1-25-qt-4-1-mix-high-gloss-uv-resistant-finish","title":"LiME LiNE 2K Clear Coat Automotive Topcoat Kit 1.25 Qt - 4:1 Mix, High-Gloss UV-Resistant Finish","description":"\u003cp\u003e\u003cstrong\u003eLiME LiNE 2K Clear Coat is a 1.25-quart automotive topcoat kit with included hardener that mixes 4:1 to deliver a durable, high-gloss finish for cars, trucks, and motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-component (2K) clear coat kit pairs a clear polyurethane base with a dedicated hardener so you can achieve professional-looking, UV-resistant results without specialty curing lights. The product is formulated for strong flow and leveling, resists sagging on vertical panels, and sands and polishes smooth after air drying. Whether you're restoring a classic, refinishing a bumper, or adding protection to a fresh base layer, this kit offers the practical mix ratio and drying window professionals and DIYers rely on.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clear coat perform on vertical panels and edges?\u003c\/h3\u003e\n\u003cp\u003eLiME LiNE's formulation emphasizes non-sagging flow and even leveling so coats can be applied on doors, fenders, and other vertical surfaces without runs. The coating helps bury panel edges and graphics, producing a consistent glossy layer that blends into surrounding areas.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAnti-sag formula for streak-free vertical application.\u003c\/li\u003e\n  \u003cli\u003eGood flow and leveling to minimize orange peel.\u003c\/li\u003e\n  \u003cli\u003eBuilds thickness to hide edges and seams.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the mixing and drying process for this 4:1 kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit uses a 4:1 volume mixing ratio (clear to hardener) for proper cure and gloss. After mixing, apply thin coats, allow flash times as recommended for your environment, and expect to be sand-ready within 12–24 hours at typical shop conditions—no bake cycle required for basic repairs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4:1 clear-to-hardener mix—measure accurately for reliable cure.\u003c\/li\u003e\n  \u003cli\u003eAir-dryable; ready to sand and polish in 12–24 hours.\u003c\/li\u003e\n  \u003cli\u003eApply multiple light coats for best finish and UV resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this clear coat protect paint exposed to sunlight and weather?\u003c\/h3\u003e\n\u003cp\u003eThis two-component clear coat contains UV-resistant components engineered to slow color fade and protect basecoat layers from environmental stress. It creates a hard, protective top layer that stands up to road wear, rain, and sunlight better than single-component clears.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-resistant chemistry to protect base colors.\u003c\/li\u003e\n  \u003cli\u003eDurable film combats light weathering and surface wear.\u003c\/li\u003e\n  \u003cli\u003eSuitable for outdoor vehicles like motorcycles and trucks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to finish and polish after curing?\u003c\/h3\u003e\n\u003cp\u003eOnce cured, the clear coat sands and polishes smoothly to a deep gloss, making it ideal for final finish work or blending repairs into surrounding panels. The product accepts standard compounding and polishing steps to remove minor finish imperfections and enhance clarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSands cleanly for leveling and defect removal.\u003c\/li\u003e\n  \u003cli\u003ePolishes to high gloss for showroom-quality reflections.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common automotive polishing compounds and pads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: LiME LiNE 2K Clear Coat is geared toward automotive professionals and experienced DIYers who need a reliable 4:1 clear with included hardener for durable, high-gloss topcoats. It fits restoration projects, collision repairs, custom paint builds, and protective refinish jobs on cars, trucks, and motorcycles where UV resistance, non-sag performance, and a sand-ready cure window are priorities. Not intended for use on unprepared or non-automotive substrates without appropriate primers and surface preparation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the correct mix ratio for this LiME LiNE 2K kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mix the clear coat and hardener at a 4:1 volume ratio for proper curing and gloss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until I can sand and polish the clear coat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Under normal shop conditions the clear coat is sand-ready in about 12–24 hours.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"LiME LiNE","offers":[{"title":"Default Title","offer_id":48080735797406,"sku":"B0BVL5CYL2","price":181.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/lime-line-clear-coat-front-can.jpg?v=1785784711"},{"product_id":"carpro-cquartz-dlux-wheel-trim-ceramic-coat-30ml-uv-protection-hydrophobic-gloss","title":"CARPRO CQUARTZ DLUX Wheel \u0026 Trim Ceramic Coat 30mL — UV Protection, Hydrophobic Gloss","description":"\u003cp\u003e\u003cstrong\u003eCARPRO CQUARTZ DLUX is a concentrated 30mL ceramic treatment that restores and shields wheels, exterior plastics, rubber and metal trim from UV damage while adding a deep, lasting gloss.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact bottle of DLUX delivers hydrophobic nanotechnology designed specifically for exterior wheel finishes and trim components. It darkens and rejuvenates oxidized plastic and rubber without leaving a greasy film, bonds to metal and chrome surfaces, and endures high temperatures common to wheel environments. One small bottle covers multiple wheels and trim areas, making it a workshop-friendly option for detailing enthusiasts and professional installers alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does DLUX improve faded plastic and rubber trim?\u003c\/h3\u003e\n\u003cp\u003eDLUX penetrates the surface layer to restore depth and color while forming a thin ceramic barrier that repels water and contaminants. The result is a renewed, satin-to-gloss appearance that resists re-oxidation and staining for months with normal use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRevives faded trim without greasy residue\u003c\/li\u003e\n  \u003cli\u003eLeaves a natural darkening effect that looks factory-fresh\u003c\/li\u003e\n  \u003cli\u003eHydrophobic finish sheds water and light soils\u003c\/li\u003e\n  \u003cli\u003eEasy application with minimal product required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs DLUX suitable for all wheel types and high-heat conditions?\u003c\/h3\u003e\n\u003cp\u003eYes — DLUX is formulated to be compatible with alloy, painted, anodized, and chrome wheel surfaces. Its ceramic chemistry tolerates temperatures over 800°F, so it maintains protection where brake heat and road temperatures spike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for all common wheel finishes\u003c\/li\u003e\n  \u003cli\u003eHeat-resistant ceramic bond prevents breakdown\u003c\/li\u003e\n  \u003cli\u003eIdeal for wheel barrels and faces exposed to brake heat\u003c\/li\u003e\n  \u003cli\u003eAverage coverage: ~10mL for four wheels plus trim\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you apply CARPRO CQUARTZ DLUX for best results?\u003c\/h3\u003e\n\u003cp\u003eStart with a clean, degreased surface and apply a small amount of product using a foam or microfiber applicator. Work in thin, even passes and allow the coating to level before removing any excess; curing time will vary with temperature and humidity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean and decontaminate surfaces first\u003c\/li\u003e\n  \u003cli\u003eApply sparingly — 30mL covers multiple wheels\/trim areas\u003c\/li\u003e\n  \u003cli\u003eRemove any high spots to avoid streaking\u003c\/li\u003e\n  \u003cli\u003eAllow proper cure time per ambient conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat maintenance will keep the coated surfaces looking their best?\u003c\/h3\u003e\n\u003cp\u003eAfter curing, periodic washing and gentle decontamination are usually sufficient to preserve gloss and protection. Avoid harsh solvents or abrasive cleaners that could strip the coating; using pH-neutral wheel and trim cleaners will extend longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRoutine washing with mild, pH-neutral detergents\u003c\/li\u003e\n  \u003cli\u003eAvoid aggressive solvents and abrasive brushes\u003c\/li\u003e\n  \u003cli\u003eReapply as needed when signs of wear appear\u003c\/li\u003e\n  \u003cli\u003eInspect after winter or heavy road salt exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: CARPRO CQUARTZ DLUX is aimed at car owners, detailers, and auto shops that want a compact, heat-tolerant ceramic option to revive and protect wheels, plastic trim, rubber, and metal accents. It suits anyone seeking a non-greasy, long-lasting protective layer that restores color and adds water-shedding performance without complex equipment. Because a small volume covers several components, it’s also a practical choice for enthusiasts who prefer to do targeted exterior maintenance with professional-grade results.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eProduction note:\u003c\/em\u003e The date printed on the bottle is the production date (marked \"Pr\" or \"PD\") in Day\/Month\/Year format (for example, 01\/10\/2024 = 01 October 2024).\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much area does one 30mL bottle cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Approximately enough for four wheels and surrounding trim — around 10mL average usage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can DLUX handle brake heat and hot wheel barrels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The ceramic formula resists temperatures above 800°F and is suitable for wheel environments.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CARPRO","offers":[{"title":"Default Title","offer_id":48080922280094,"sku":"B00NR8VJP2","price":101.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/carpro-cquartz-dlux-front-label.jpg?v=1785792415"},{"product_id":"spraymax-2k-high-gloss-clearcoat-aerosol-2-pack-professional-acrylic-polyurethane-fast-dry","title":"SprayMax 2K High Gloss Clearcoat Aerosol 2-Pack — Professional Acrylic Polyurethane, Fast-Dry","description":"\u003cp\u003e\u003cstrong\u003eSprayMax 2K High Gloss Clearcoat Aerosol (2 PACK) is a two-component professional automotive clear that delivers a showroom-quality mirror gloss and long-lasting protection straight from an aerosol can.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for repair shops, restoration projects, and custom painters, this 2K acrylic polyurethane clearcoat combines easy aerosol convenience with the performance expected from a spray-gun system. The two-component chemistry activates inside the can, producing a durable, chemical- and UV-resistant top layer that levels smoothly, resists yellowing, and pairs with solvent or waterborne basecoats. Fast dry times and a long pot life let you work efficiently while achieving a deep, high-gloss finish that’s polishable and hard-wearing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does SprayMax 2K make refinishing faster and simpler?\u003c\/h3\u003e\n\u003cp\u003eThe aerosol format eliminates the need for separate mixing cups, compressors, or spray guns while still delivering a two-component cure. Activation is performed in-can; after shaking you have the same crosslinked durability as conventional 2K systems but with precise, fingertip control for spot repairs or whole panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-touch activation inside the aerosol — no separate hardeners or tools required.\u003c\/li\u003e\n  \u003cli\u003eFan nozzle for even laydown and reduced runs during application.\u003c\/li\u003e\n  \u003cli\u003eCompatible with solvent and waterborne basecoats for flexible use.\u003c\/li\u003e\n  \u003cli\u003eDust-dry in ~20 minutes to keep workflow moving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and longevity can I expect from this clearcoat?\u003c\/h3\u003e\n\u003cp\u003eFormulated with advanced 2-component acrylic resins, the clearcoat offers strong resistance to environmental stressors without compromising gloss retention. It resists gasoline, chemicals, and UV exposure better than single-component aerosols, helping maintain color integrity and preventing yellowing over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh resistance to gasoline, chemical splash, and weathering.\u003c\/li\u003e\n  \u003cli\u003eUV-stable formula to preserve gloss and color fidelity.\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant surface that withstands everyday wear.\u003c\/li\u003e\n  \u003cli\u003ePolishable finish for restoring mirror-like depth after curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow soon can I handle or reassemble parts after spraying?\u003c\/h3\u003e\n\u003cp\u003eSprayMax 2K cures quickly compared with conventional clears: it becomes dust-free in about 20 minutes, and parts can generally be handled or assembled within 8–24 hours depending on temperature and film thickness. The product also offers up to 48 hours of usable pot life after activation in the can, giving you flexibility for multiple panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDust-dry in approximately 20 minutes for fast turnaround.\u003c\/li\u003e\n  \u003cli\u003eReady to handle or assemble in 8–24 hours under typical shop conditions.\u003c\/li\u003e\n  \u003cli\u003ePot life up to 48 hours after activation for multi-part jobs.\u003c\/li\u003e\n  \u003cli\u003eExcellent leveling reduces sanding needs before polishing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use SprayMax 2K on repairs and full vehicle refinish jobs?\u003c\/h3\u003e\n\u003cp\u003eYes — it’s engineered for both spot repairs and full refinishes. The clearcoat’s compatibility with all standard basecoat systems and its professional-level durability make it suitable for cars, motorcycles, and custom automotive projects where a brilliant, lasting gloss is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for spot repairs, panel work, and complete vehicle topcoats.\u003c\/li\u003e\n  \u003cli\u003eWorks with solvent and waterborne basecoats without color shift.\u003c\/li\u003e\n  \u003cli\u003eDesigned for automotive surfaces including metal, plastic trim, and painted substrates.\u003c\/li\u003e\n  \u003cli\u003eTrusted in professional body shops and restoration builds worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: SprayMax 2K High Gloss Clearcoat Aerosol (2 PACK) is aimed at professional auto body shops, restoration specialists, custom builders, and serious DIYers who want spray-gun quality results without the complexity of mixing and equipment. If you need a fast-curing, UV-resistant, high-gloss topcoat that levels smoothly, resists chemicals and fuel, and stays true to basecoat color, this 2K aerosol system provides an accessible, durable solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need extra hardener or tools to use SprayMax 2K?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No extra hardener or spray equipment is required—activation happens inside the can so you can spray directly after shaking.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this clearcoat compatible with waterborne basecoats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it is formulated to work with both solvent and waterborne basecoat systems without causing color shift.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SprayMax","offers":[{"title":"Default Title","offer_id":48081014456478,"sku":"B00W2D806Y","price":120.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/spraymax-2k-high-gloss-front-can.jpg?v=1785794530"},{"product_id":"moshify-spraymax-2k-clear-coat-bundle-with-spray-gun-trigger-high-gloss-48-hour-pot-life","title":"Moshify SprayMax 2K Clear Coat Bundle with Spray-Gun Trigger, High-Gloss \u0026 48-Hour Pot Life","description":"\u003cp\u003e\u003cstrong\u003eMoshify SprayMax 2K Clear Coat Spray Can Bundle is a two-part automotive clear coat kit with a reusable spray-gun-style trigger that delivers a durable, high-gloss finish without a professional booth.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you need a pro-grade clear coat that’s easy to apply and stands up to abrasion, chemicals, and weathering, this Moshify bundle combines SprayMax 2K technology with a comfortable trigger attachment so you can spray like a gun. The 2K formula cures harder and faster than single-component clears, while the trigger converts standard aerosol cans into a more ergonomic, controlled applicator. The kit is designed to give vehicle owners, detailers, and small body shops the look and protection of a high-end finish without renting expensive equipment.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the SprayMax 2K clear coat differ from regular aerosol clears?\u003c\/h3\u003e\n\n\u003cp\u003eSprayMax 2K is a two-component (2K) aerosol system; it uses a chemical activator to initiate a curing reaction that produces a tougher, glossier film than single-component aerosols. This chemistry increases hardness, chemical resistance, and weather durability while reducing running and sagging when applied correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTwo-part formula requires mixing with the included activator for full performance.\u003c\/li\u003e\n  \u003cli\u003eCures to a high-gloss, impact-resistant finish faster than 1K aerosols.\u003c\/li\u003e\n  \u003cli\u003eImproved resistance to gasoline, solvents, and UV-related yellowing.\u003c\/li\u003e\n  \u003cli\u003eSuitable for spot repairs, panels, and full resprays when layered properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the Moshify spray-gun trigger useful for DIY and shop work?\u003c\/h3\u003e\n\n\u003cp\u003eThe Moshify trigger attachment snaps onto standard SprayMax cans and replicates the feel and control of a spray gun without hoses or compressors. It reduces finger fatigue, improves spray angle control, and helps produce more even coats, especially on larger panels.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eRotating nozzle allows consistent spray direction for edges and contours.\u003c\/li\u003e\n  \u003cli\u003eErgonomic handle reduces hand strain during extended spraying sessions.\u003c\/li\u003e\n  \u003cli\u003eQuick on\/off attachment for fast changes between cans and colors.\u003c\/li\u003e\n  \u003cli\u003eMinimal cleanup compared with conventional spray guns—no fluid cups or hoses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long can I store and work with the mixed 2K clear coat?\u003c\/h3\u003e\n\n\u003cp\u003eMoshify’s SprayMax 2K system is formulated with a generous working window and a sensible shelf life. The product offers a 48-hour pot life after activation—enough time to return to a project within two days—while unopened cans keep for approximately three years when stored correctly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e48-hour pot life after mixing activator—resume spraying within two days.\u003c\/li\u003e\n  \u003cli\u003eShelf life about three years when stored cool and dry; manufacturing date stamped on can.\u003c\/li\u003e\n  \u003cli\u003eFollow recommended spray and flash times for best film build and cure.\u003c\/li\u003e\n  \u003cli\u003eDiscard mixed material after the pot life has expired to avoid surface defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this clear coat hold up outdoors and resist everyday wear?\u003c\/h3\u003e\n\n\u003cp\u003eSprayMax 2K clear coat is engineered for durability, providing strong resistance to scratches, abrasion, and many chemicals encountered in automotive use. While it resists gasoline and common solvents better than 1K clears, proper application and sufficient film thickness are key to long-term performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh resistance to abrasion and scratching for road use.\u003c\/li\u003e\n  \u003cli\u003eImproved chemical and gasoline resistance compared with 1K aerosols.\u003c\/li\u003e\n  \u003cli\u003eProper layering and cure ensure optimum UV and weather protection.\u003c\/li\u003e\n  \u003cli\u003eCan be compounded and polished after full cure for enhanced gloss.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The Moshify SprayMax 2K Clear Coat Spray Can Bundle is aimed at automotive DIYers, mobile detailers, body-shop technicians doing small- to medium-sized repairs, and anyone who wants a professional-looking, durable clear finish without investing in a full spray booth. If you value a high-gloss, chemical-resistant topcoat and prefer the ease of an aerosol with the control of a spray gun, this bundle provides a practical, cost-effective solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special equipment to use the SprayMax 2K cans?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No compressor is required; the cans are aerosol-based. Use the Moshify trigger for gun-like control and follow mixing instructions for 2K activation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until the clear coat is fully cured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dry-to-handle typically occurs within hours, but full hardness develops over days; follow manufacturer's cure recommendations for polishing and reassembly.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Moshify","offers":[{"title":"Default Title","offer_id":48081186586782,"sku":"B08CJYRY3D","price":105.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/moshify-front-can-and-trigger.jpg?v=1785797923"},{"product_id":"nasiol-zr53-nano-ceramic-car-coating-kit-3-year-hydrophobic-protection-10h-hardness","title":"Nasiol ZR53 Nano Ceramic Car Coating Kit — 3-Year Hydrophobic Protection, 10H Hardness","description":"\u003cp\u003e\u003cstrong\u003eNasiol ZR53 is a professional-grade nano ceramic coating kit that delivers durable, hydrophobic paint protection with a high-gloss finish for up to three years when applied correctly.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete kit from Nasiol brings advanced SiO2-based protection to car exteriors in a user-friendly formula. It combines hard, scratch-resistant film formation with intense water beading and an enhanced color depth to keep painted surfaces, plastics, rims and lights looking newer for longer. The kit includes materials and guidance designed to make a professional result achievable for enthusiasts and detailing pros alike.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Nasiol ZR53 protect against everyday wear?\u003c\/h3\u003e\n\n\u003cp\u003eZR53 forms a tightly bonded nano-ceramic layer that increases surface hardness and reduces micro-scratches from washing and road debris. Its inorganic network resists UV-induced oxidation and helps block environmental contaminants from chemically bonding to the paint.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e10H surface hardness rating for improved scratch resistance\u003c\/li\u003e\n  \u003cli\u003eUp to three years durability with a single layer under normal conditions\u003c\/li\u003e\n  \u003cli\u003eProtects against UV, bird droppings, acid rain residues and road grime\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this coating make my car easier to clean?\u003c\/h3\u003e\n\n\u003cp\u003eYes. Nasiol ZR53 creates a highly hydrophobic surface that forces water and liquids to bead and roll off, carrying dirt and contaminants away. That beading effect minimizes sticking of mud and organic deposits and lowers the frequency and effort of washing.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStrong water-beading and self-cleaning properties\u003c\/li\u003e\n  \u003cli\u003eReduces staining from contaminants like bird droppings and tar\u003c\/li\u003e\n  \u003cli\u003eHelps keep gloss and color depth between washes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the application for a DIY user?\u003c\/h3\u003e\n\n\u003cp\u003eZR53 is formulated for straightforward application: a single-layer hybrid coating that requires careful surface prep, controlled application, and light buffing for optimal results. The kit includes guidance to help replicate professional workflow steps, but attention to prep and curing time is essential for long-term durability.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for single-layer application with simple buffing\u003c\/li\u003e\n  \u003cli\u003eWorks on paint, exterior plastics, rims, headlights and taillights\u003c\/li\u003e\n  \u003cli\u003eRequires thorough surface cleaning and decontamination before coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat visual changes should I expect after coating?\u003c\/h3\u003e\n\n\u003cp\u003eNasiol ZR53 enhances gloss and color depth, leaving a slick, reflective surface with a soft-touch feel. The coating smooths microscopic surface irregularities to amplify shine while preserving the factory appearance of the paintwork.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-gloss finish with amplified color depth\u003c\/li\u003e\n  \u003cli\u003eGloss retention between maintenance washes\u003c\/li\u003e\n  \u003cli\u003eUniform look across painted surfaces, plastics, and lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Nasiol ZR53 is aimed at car owners and detailers who want long-lasting, professional-grade ceramic protection without outsourcing the job. It suits enthusiasts seeking durable gloss and hydrophobic performance, professional detail shops requiring a reliable coating option, and anyone prepared to follow careful surface prep and application steps to maximize longevity. If you prefer a simple spray-on sealant for short-term upkeep, a ceramic coating like ZR53 is more advanced and meant for longer-term protection.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does Nasiol ZR53 last?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: When applied correctly, a single layer can provide up to three years of protection under normal conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply ZR53 on plastic trims and headlights?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, ZR53 is formulated for paint, exterior plastics, rims, headlights and taillights for consistent protection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Nasiol","offers":[{"title":"Default Title","offer_id":48081494376606,"sku":"B0722MCBBT","price":219.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/nasiol-zr53-front-kit-packaging.jpg?v=1785806509"},{"product_id":"gtechniq-halo-flexible-film-coating-for-vinyl-ppf-1-fl-oz-ceramic-bonding-water-beading","title":"Gtechniq Halo Flexible Film Coating for Vinyl \u0026 PPF — 1 fl oz, Ceramic Bonding, Water Beading","description":"\u003cp\u003e\u003cstrong\u003eGtechniq Halo Flexible Film Coating is a purpose-built ceramic coating in a 1 fl oz bottle that chemically bonds to vinyl wraps and paint protection film to deliver slick gloss, water beading, and dirt repellency.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered by Gtechniq, a company known for molecular nanotechnology, Halo Flexible Film Coating is formulated specifically for flexible substrates such as vinyl wraps, satin and gloss films, and self-healing PPF. Unlike conventional waxes or sealants that simply sit on the surface, Halo forms a genuine bond with the film to enhance surface hardness, boost shine, and make everyday cleaning easier without compromising film flexibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Halo protect vinyl wraps and paint protection film?\u003c\/h3\u003e\n\u003cp\u003eHalo creates a thin, bonded ceramic layer that increases slip and reduces surface energy, so contaminants have less chance to cling. The coating helps shed water and road grime, which reduces staining and simplifies maintenance for wrapped vehicles and PPF-covered panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eForms a chemical bond to vinyl and PPF for longer-lasting protection\u003c\/li\u003e\n  \u003cli\u003eImproves water beading and dirt release for easier washing\u003c\/li\u003e\n  \u003cli\u003eCompatible with gloss, matte, satin and self-healing films\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Halo change the look or texture of matte or satin wraps?\u003c\/h3\u003e\n\u003cp\u003eHalo is compatible with matte and satin finishes and has been formulated to respect their visual character. When applied correctly, it enhances spill-beading and protection without adding a high-gloss, plasticky shine that would alter the film’s intended appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSafe for matte and satin films when applied per instructions\u003c\/li\u003e\n  \u003cli\u003eMinimizes contamination and staining while preserving finish texture\u003c\/li\u003e\n  \u003cli\u003eDoes not create an unnatural glossy coating on matte surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do you apply the 1 fl oz Halo coating for best results?\u003c\/h3\u003e\n\u003cp\u003eApplication is straightforward: wipe a small amount onto a clean microfiber, spread evenly over the film, and buff to a uniform finish. Work in manageable panels, avoid over-application, and allow the coating to cure per product guidance to achieve optimal bonding and durability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply sparingly with a soft microfiber or applicator pad\u003c\/li\u003e\n  \u003cli\u003eBuff lightly to an even sheen; no heavy rubbing required\u003c\/li\u003e\n  \u003cli\u003eWork panel by panel and follow recommended curing time for best performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is this small 1 fl oz bottle — how much coverage can I expect?\u003c\/h3\u003e\n\u003cp\u003eThough compact, the 1 fl oz size is concentrated and intended for spot work, test panels, or coating small vehicles and details. Coverage depends on film type and application technique; careful, thin coats extend the effective coverage of each bottle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConcentrated formula — thin layers go a long way\u003c\/li\u003e\n  \u003cli\u003eIdeal for sample applications, trims, or detail-focused work\u003c\/li\u003e\n  \u003cli\u003eMultiple thin passes are better than a single heavy coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Gtechniq Halo Flexible Film Coating suits professional detailers, wrap installers, and car enthusiasts who want an advanced, bonded ceramic layer designed specifically for flexible films and PPF. If you manage vinyl-wrapped vehicles, aftermarket film installations, or high-value painted surfaces protected by PPF, Halo offers a technical solution to reduce maintenance time and maintain appearance without changing the film’s original finish. It’s especially useful for projects where film flexibility and compatibility with matte or satin textures are essential.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use Halo on both matte and gloss vinyl?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Halo is formulated to bond to gloss, matte and satin films while preserving their visual finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does Halo work on paint protection film (PPF)?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It chemically bonds to PPF to improve water and dirt repellency without affecting self-healing properties.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Gtechniq","offers":[{"title":"Default Title","offer_id":48081501388958,"sku":"B081PSG25L","price":162.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/gtechniq-halo-front-bottle.jpg?v=1785806897"},{"product_id":"carpro-cquartz-uk-3-0-ceramic-coating-kit-30ml-100ml-reload-70-sio2-high-gloss-hydrophobic-protection","title":"CARPRO CQUARTZ UK 3.0 Ceramic Coating Kit 30ml + 100ml Reload — 70% SiO2 High-Gloss Hydrophobic Protection","description":"\u003cp\u003e\u003cstrong\u003eCARPRO CQUARTZ UK 3.0 is a professional-grade, quartz-rich ceramic coating kit that bonds to paint, glass, metal and plastic to deliver durable surface protection and high gloss.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact 30ml kit, paired with a 100ml Reload 2.0 topper, uses a high silica (SiO2) quartz formulation designed for detailing pros and enthusiasts who want long-lasting hydrophobic performance and enhanced paint depth. The package includes applicators and a leveling towel so you can apply and finish panels with precise control. Recommended ambient application temperature ranges make it suitable for many workshop environments when following best-practice preparation.\u003c\/p\u003e\n\n\u003ch3\u003eHow does CQUARTZ UK 3.0 protect my car's finish?\u003c\/h3\u003e\n\n\u003cp\u003eCQUARTZ UK 3.0 creates a hard, glass-like layer over surfaces that resists environmental contaminants and offers strong UV defense. The high silica-quartz concentration forms a durable interface that helps repel water and dirt, keeping finishes easier to clean while enhancing gloss depth.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eContains 70% SiO2 with 99.9% purity for a rigid, glassy surface\u003c\/li\u003e\n  \u003cli\u003eFormulated to resist chemicals, road salt and environmental fallout\u003c\/li\u003e\n  \u003cli\u003eProduces pronounced hydrophobic (water-repellent) behavior\u003c\/li\u003e\n  \u003cli\u003eImproves paint clarity and perceived depth for a showroom look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces can I coat and what temperature should I use?\u003c\/h3\u003e\n\n\u003cp\u003eThe formula bonds to painted panels, glass, metal and many plastics when surfaces are correctly prepared. CARPRO recommends applying the coating in ambient temperatures between 40°F and 100°F (approximately 4°C–38°C) to ensure proper flash and cure characteristics.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with clearcoat paint, gel-coat, metal trims and non-porous plastics\u003c\/li\u003e\n  \u003cli\u003eBest applied in clean, dust-free areas within the recommended temperature range\u003c\/li\u003e\n  \u003cli\u003eFollow standard decontamination and paint correction prior to application\u003c\/li\u003e\n  \u003cli\u003eUse included microfiber suede towel and applicators for even leveling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the kit and how do I maintain the coating?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit contains everything needed to apply and maintain the initial layer: a 30ml bottle of CQUARTZ UK 3.0, a 100ml Reload 2.0 maintenance spray, multiple suede applicators, an applicator block and an orange suede leveling towel. After the base cure, occasional use of Reload 2.0 refreshes slickness and extends the coating's longevity between professional reapplications.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eKit includes: 30ml CQUARTZ UK 3.0, 100ml Reload 2.0, applicators, block and towel\u003c\/li\u003e\n  \u003cli\u003eReload 2.0 is a top-up product to enhance hydrophobicity and gloss\u003c\/li\u003e\n  \u003cli\u003eLight regular washing and periodic Reload applications keep surfaces slick\u003c\/li\u003e\n  \u003cli\u003eDo not apply a maintenance spray until the base layer has adequately cured\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does a professional installation take and what prep is required?\u003c\/h3\u003e\n\n\u003cp\u003eApplication time varies with panel count and surface condition; a single panel can take 10–20 minutes including leveling, while a full vehicle typically requires several hours plus cure time. Proper preparation—decontamination, clay bar, and paint correction—ensures strong bonding and optimum optical results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExpect longer time when paint correction is needed before coating\u003c\/li\u003e\n  \u003cli\u003eUse the supplied applicators and suede towel for controlled application\u003c\/li\u003e\n  \u003cli\u003eAllow recommended cure intervals and avoid heavy exposure during initial cure\u003c\/li\u003e\n  \u003cli\u003eProfessional detailers will achieve the most consistent, long-lasting finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: CARPRO CQUARTZ UK 3.0 is aimed at detailers and committed car owners who want a durable, high-SiO2 ceramic finish that enhances gloss and repels contaminants. If you prepare surfaces properly and can work within the recommended temperature window, this kit provides the core materials and maintenance spray needed to achieve a professional-looking, long-lasting result.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use CQUARTZ UK 3.0 on plastic trim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it bonds to many non-porous plastics when surfaces are clean. Test a small area first for compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I use Reload 2.0?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use Reload 2.0 periodically after initial cure to refresh hydrophobicity—typically every few months depending on exposure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CARPRO","offers":[{"title":"Default Title","offer_id":48082721570974,"sku":"B07D4NM5XM","price":158.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/carpro-cquartz-uk-3-0-front-packaging.jpg?v=1785812066"},{"product_id":"spraymax-2k-high-gloss-clearcoat-aerosol-6-pack-ready-to-spray-durable-uv-resistant-finish","title":"SprayMax 2K High Gloss Clearcoat Aerosol 6-Pack — Ready-to-Spray, Durable UV-Resistant Finish","description":"\u003cp\u003e\u003cstrong\u003eSprayMax USC 2K High Gloss Clearcoat is a ready-to-spray, two-component aerosol that delivers a mirror-like, durable automotive topcoat without a spray gun.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for restorers, collision shops, and DIY enthusiasts who demand a showroom gloss from an aerosol can, this SprayMax 2K clear uses advanced two-component acrylic polyurethane chemistry to combine exceptional surface leveling with high chemical, fuel and UV resistance. The system activates inside the can, giving you up to 48 hours pot life and fast dust-dry times so you can finish projects faster while maintaining a deep, non-yellowing finish compatible with solvent and waterborne basecoats.\u003c\/p\u003e\n\n\u003ch3\u003eHow does SprayMax 2K achieve a showroom-quality gloss?\u003c\/h3\u003e\n\u003cp\u003eThe product pairs a finely balanced acrylic resin with a hardening agent in a pressurized can, producing a smooth, reflective film that levels out brush or basecoat imperfections. Proper overlap and light passes yield a continuous, high-depth appearance similar to sprayed-from-a-gun finishes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-component polyurethane chemistry for superior gloss and depth\u003c\/li\u003e\n  \u003cli\u003eEven atomization via fan nozzle for consistent coverage\u003c\/li\u003e\n  \u003cli\u003eExcellent film leveling to minimize orange peel\u003c\/li\u003e\n  \u003cli\u003eNo yellowing over time when used over recommended basecoats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this clearcoat for repairs and full refinishes?\u003c\/h3\u003e\n\u003cp\u003eYes — it’s formulated to work with both localized repairs and complete resprays on cars, motorcycles, and custom projects. The clearcoat bonds well to properly prepared solvent and waterborne basecoats and maintains color integrity when applied according to instructions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with most solvent and waterborne basecoat systems\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to properly prepped substrates and fillers\u003c\/li\u003e\n  \u003cli\u003eFast dust-dry (≈20 minutes) to speed handling and assembly\u003c\/li\u003e\n  \u003cli\u003ePolishable finish once fully cured for extra shine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and chemical resistance features?\u003c\/h3\u003e\n\u003cp\u003eSprayMax 2K clear is engineered to resist environmental exposure, gasoline, and common shop chemicals, giving painted surfaces longer life and better protection against abrasion. The cured film offers strong weathering resistance without compromising gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh resistance to UV-induced degradation and yellowing\u003c\/li\u003e\n  \u003cli\u003eChemical and gasoline resistance suitable for automotive use\u003c\/li\u003e\n  \u003cli\u003eAbrasion-resistant surface that holds polish well\u003c\/li\u003e\n  \u003cli\u003eStable finish under normal automotive operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast does it dry and how long can I work with it once activated?\u003c\/h3\u003e\n\u003cp\u003eOnce the internal activator is released, the can provides a practical pot life so you can complete a session without waste. The clear goes dust-dry in about 20 minutes and reaches handling strength between 8 and 24 hours depending on temperature and film thickness.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDust-dry in roughly 20 minutes for quick recoating\u003c\/li\u003e\n  \u003cli\u003eHandling assembly time from 8–24 hours based on conditions\u003c\/li\u003e\n  \u003cli\u003eUp to 48 hours pot life after activation in the can for multi-stage work\u003c\/li\u003e\n  \u003cli\u003ePolishable after full cure to enhance gloss depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: SprayMax USC 2K High Gloss Clearcoat Aerosol is aimed at professional body shops, restoration specialists, and skilled hobbyists who need a true 2K automotive topcoat from an aerosol format. It’s ideal when a high-gloss, durable finish is required but a spray gun setup is impractical — for on-vehicle touch-ups, parts refinishing, and custom projects where color fidelity, chemical resistance, and long-term appearance matter. Follow surface prep and application guidelines for best results and to protect both appearance and performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is SprayMax 2K compatible with waterborne basecoats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is formulated to work with both solvent and waterborne basecoat systems when the basecoat is properly cured and prepared.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the pot life after activating the can?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: After activation the can provides up to about 48 hours of pot life under normal storage and temperature conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SprayMax","offers":[{"title":"Default Title","offer_id":48082821054622,"sku":"B00W2D83K2","price":287.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/spraymax-2k-aerosol-front-packaging.jpg?v=1785815444"},{"product_id":"spraymax-2k-high-gloss-clearcoat-aerosol-4-pack-automotive-2-component-uv-resistant-fast-drying","title":"SprayMax 2K High Gloss Clearcoat Aerosol 4‑Pack — Automotive 2‑component, UV‑resistant, Fast‑drying","description":"\u003cp\u003e\u003cstrong\u003eSprayMax USC 2K High Gloss Clearcoat Aerosol (4 PACK) is a ready‑to‑use, two‑component polyurethane aerosol that delivers a durable, mirror‑like automotive topcoat without a spray gun.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 4‑can pack contains SprayMax’s 2K acrylic\/polyurethane clear developed for automotive refinishing and custom projects. Engineered to pair with solvent and waterborne basecoats, the aerosol system activates internally so you get the protection and gloss of a professional shop finish from a handheld can. The formula focuses on long‑term chemical and UV resistance, fast drying and excellent surface leveling to reduce orange peel and simplify polishing.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this product create a showroom gloss from an aerosol can?\u003c\/h3\u003e\n\u003cp\u003eThe SprayMax 2K aerosol contains a mixed two‑component polyurethane resin inside each can, activated by an internal mechanism when you press the button. This lets the clearcoat cure into a hard, reflective layer with strong flow and leveling properties.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal activator mixes components for true 2K performance without separate cups or guns.\u003c\/li\u003e\n  \u003cli\u003eFan nozzle design gives broad, even coverage to minimize runs and orange peel.\u003c\/li\u003e\n  \u003cli\u003eExceptional flow and leveling reduce sanding and buffing time for a mirror shine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and durability can I expect for my car or motorcycle?\u003c\/h3\u003e\n\u003cp\u003eSprayMax’s 2K chemistry is built to resist environmental stresses that degrade ordinary clears. It forms a tough, abrasion‑resistant surface that stands up to fuel, common chemicals, and sunlight without rapid yellowing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh resistance to gasoline, oils and common workshop solvents helps preserve finish integrity.\u003c\/li\u003e\n  \u003cli\u003eUV‑stable resins minimize discoloration over time compared with non‑2K aerosols.\u003c\/li\u003e\n  \u003cli\u003eGood abrasion and weather resistance for daily‑use vehicles and exposed motorcycle parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow fast will the clearcoat dry and can I polish or assemble quickly?\u003c\/h3\u003e\n\u003cp\u003eThe clearcoat reaches dust‑dry in about 20 minutes under typical shop conditions and is handleable within approximately 8–24 hours, depending on temperature and humidity. It polishes well once cured, allowing a high‑gloss finish with standard polishing compounds.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDust‑dry ≈ 20 minutes; full handling window 8–24 hours — shorter in warm, dry conditions.\u003c\/li\u003e\n  \u003cli\u003ePolishable finish after recommended cure time to achieve deeper gloss and remove minor imperfections.\u003c\/li\u003e\n  \u003cli\u003ePot life after activation up to about 48 hours, reducing waste during multi‑stage projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I use SprayMax 2K aerosol safely and get consistent results?\u003c\/h3\u003e\n\u003cp\u003eShake, activate, and spray in overlapping passes from the recommended distance, keeping the can moving to avoid runs. Follow standard spray‑paint safety: ventilated area, mask, gloves and surface prep for adhesion and longevity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface prep: clean, degrease and allow basecoat to flash per manufacturer instructions before clearcoat.\u003c\/li\u003e\n  \u003cli\u003eApplication: activate the can according to directions, apply even coats with light overlaps, and respect flash times.\u003c\/li\u003e\n  \u003cli\u003eSafety: use respirator, gloves and eye protection; cure in a ventilated, low‑dust environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This 4‑pack is aimed at professional body shops, restoration specialists, and advanced DIYers who need shop‑grade two‑component clearcoat without investing in spray equipment. It’s suitable for automotive and motorcycle restorations, spot repairs, custom panels, and situations where a high‑gloss, chemically resistant topcoat matters. Choose SprayMax USC 2K if you want the durability and finish quality of a 2K polyurethane clear delivered in a convenient aerosol format for precise, portable application.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can SprayMax 2K be used over waterborne basecoats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is formulated to be compatible with both solvent and waterborne basecoat systems when applied per instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long after activation can I use the remaining clear in the can?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: After activation the pot life is up to about 48 hours, depending on temperature and storage conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SprayMax","offers":[{"title":"Default Title","offer_id":48082821218462,"sku":"B00W2D81ZO","price":203.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/spraymax-usc-2k-clearcoat-aerosol-front-packaging.jpg?v=1785815437"},{"product_id":"sherwin-williams-finish-1-ultimate-overall-clearcoat-fc720-1-gal-with-fh611-fast-hardener-high-solids-fast-cure","title":"SHERWIN WILLIAMS Finish 1 Ultimate Overall Clearcoat FC720 1 GAL with FH611 Fast Hardener — High-Solids, Fast-Cure","description":"\u003cp\u003e\u003cstrong\u003eSHERWIN WILLIAMS Finish 1 Ultimate Overall Clearcoat (FC720) with FH611 Fast Hardener is a high-solids urethane clearcoat system formulated for fast, durable, high-gloss overall repairs and blending.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis two-component clearcoat package pairs FC720 Finish 1 clearcoat with the FH611 Fast Hardener to deliver excellent gloss, depth of image (DOI), and leveling for overall spray jobs or spot repairs. Designed for both air-dry and force-dry environments, it balances shop productivity with refinishing quality so you can achieve consistent results whether blending into adjacent panels or laying down a full clear. The system mixes at a 4:1 ratio and is engineered for smooth flow, easy buffing, and strong crosslinking when used per manufacturer directions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this clearcoat perform in a busy collision repair shop?\u003c\/h3\u003e\n\n\u003cp\u003eFinish 1 Ultimate Overall Clearcoat with the FH611 Fast Hardener cures quickly to support fast turnaround times while keeping high-gloss control. It is suitable for both overall jobs and strategic blends, helping technicians maintain production schedules without sacrificing finish quality.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-solids formulation for fewer coats and improved coverage\u003c\/li\u003e\n  \u003cli\u003eFast hardener option reduces dry time in force-dry cycles\u003c\/li\u003e\n  \u003cli\u003eGood flow and leveling minimize orange peel and reduce sanding\u003c\/li\u003e\n  \u003cli\u003eExcellent buffing properties for rapid final finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat mixing and application details should I follow for reliable results?\u003c\/h3\u003e\n\n\u003cp\u003eMix the clearcoat and hardener at the specified 4:1 ratio by volume. Use appropriate reducers and follow spray equipment guidelines, flash times, and bake schedules recommended by SHERWIN WILLIAMS to ensure proper film development and adhesion.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMix ratio: 4 parts FC720 clearcoat to 1 part FH611 hardener\u003c\/li\u003e\n  \u003cli\u003eUse recommended reducers for temperature and application method\u003c\/li\u003e\n  \u003cli\u003eApply in multiple even coats, allowing proper flash between coats\u003c\/li\u003e\n  \u003cli\u003eForce-dry or air-dry per shop conditions and oven schedules\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this system blend and buff compared with other clears?\u003c\/h3\u003e\n\n\u003cp\u003eThis urethane clearcoat is formulated for smooth blending into adjacent panels and provides a high DOI that polishes to an even gloss. Its leveling characteristics reduce the need for heavy finishing work, and its buffing response delivers a showroom-quality sheen when properly cured.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eExcellent blending for feathered edges and panel transitions\u003c\/li\u003e\n  \u003cli\u003eHigh DOI for deep, reflective finishes after polishing\u003c\/li\u003e\n  \u003cli\u003eBalanced hardness for ease of sanding and safe buffing\u003c\/li\u003e\n  \u003cli\u003eConsistent film build supports uniform final appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and compatibility points should I consider before use?\u003c\/h3\u003e\n\n\u003cp\u003eAs a two-component urethane product, use appropriate personal protective equipment, adequate ventilation, and follow SHERWIN WILLIAMS safety data sheet instructions. Ensure substrate preparation, primer, and basecoat systems are compatible with a urethane clearcoat to avoid adhesion or appearance issues.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWear respirator, gloves, and eye protection during mixing and spraying\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer flash and cure guidelines to prevent solvent entrapment\u003c\/li\u003e\n  \u003cli\u003eCheck compatibility with primers and basecoats used in the repair\u003c\/li\u003e\n  \u003cli\u003eDispose of mixed material per local hazardous-waste regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: SHERWIN WILLIAMS Finish 1 Ultimate Overall Clearcoat FC720 with FH611 Fast Hardener is aimed at professional collision-repair shops, body technicians, and refinishing specialists who need a high-solids urethane clear that blends well, cures quickly, and polishes to a high-gloss finish. It is ideal for shops performing both overall repaints and spot blending where consistent DOI, leveling, and buffing characteristics are required.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the mix ratio for FC720 and FH611?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mix Finish 1 FC720 clearcoat with FH611 hardener at a 4:1 volume ratio.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this clearcoat for both spot and overall repairs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is formulated for blending into adjacent panels and for full overall applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SHERWIN WILLIAMS","offers":[{"title":"Default Title","offer_id":48082881052830,"sku":"B01N7VDUY3","price":237.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/sherwin-williams-fc720-front-can.jpg?v=1785817779"},{"product_id":"sem-black-texture-coating-spray-aerosol-16-oz-matte-flexible-trim-restorer","title":"SEM Black Texture Coating Spray Aerosol 16 oz — Matte Flexible Trim Restorer","description":"\u003cp\u003e\u003cstrong\u003eSEM 39853 Black Texture Coating Spray is a ready-to-use aerosol that restores and refines textured plastic, vinyl and fiberglass surfaces with a flexible, matte-black finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for automotive trim, bumpers, dashboards and molded plastic parts, this 16 oz. aerosol delivers a factory-style textured surface that hides imperfections and provides a paintable, long-lasting layer. The formula combines flexible resins and texture agents so it bonds to a range of substrates and moves with the part, reducing cracking and peeling. Because it sprays on evenly and dries to a low-luster black, it’s commonly used by DIYers and professional shops to refresh interior and exterior components before final topcoats or as a finished look.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this help restore older bumpers and plastic trim?\u003c\/h3\u003e\n\n\u003cp\u003eSEM 39853 recreates the original textured appearance on worn or faded plastic and rubberized trim. It hides scuffs and small surface imperfections while forming a resilient layer that resists chips and abrasion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRecreates factory texture on bumpers, fascia, and side trim\u003c\/li\u003e\n  \u003cli\u003eConceals scratches and surface defects without heavy sanding\u003c\/li\u003e\n  \u003cli\u003eFlexible finish reduces flaking on flexible parts\u003c\/li\u003e\n  \u003cli\u003eQuick tack and dry times speed up repair work\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces can I use the spray on and how should I prepare them?\u003c\/h3\u003e\n\n\u003cp\u003eThe coating bonds well to clean plastics, fiberglass, and many painted surfaces when prepared correctly. Proper surface prep—cleaning, scuffing and using adhesion promoters when needed—ensures consistent coverage and long-term adhesion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for bumpers, dash trim, vinyl, molded plastics and fiberglass tops\u003c\/li\u003e\n  \u003cli\u003eClean with a compatible degreaser or SEM prep product\u003c\/li\u003e\n  \u003cli\u003eLightly scuff glossy areas with scuff pad or fine sandpaper\u003c\/li\u003e\n  \u003cli\u003ePrime or use an adhesion promoter for difficult plastics\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply SEM 39853 for best results?\u003c\/h3\u003e\n\n\u003cp\u003eShake the can thoroughly and apply several light, even coats from a consistent distance for uniform texture. Allow recommended flash time between coats, then let the coating cure before handling or painting over, following manufacturer instructions for temperature and humidity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShake can vigorously for at least one minute after mixing ball moves freely\u003c\/li\u003e\n  \u003cli\u003eApply 3–5 light coats from 8–12 inches away for even texture\u003c\/li\u003e\n  \u003cli\u003eLet each coat flash per label directions to avoid runs\u003c\/li\u003e\n  \u003cli\u003eTest on scrap to dial in spray distance and number of coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I paint over this texture coating or use it as a final finish?\u003c\/h3\u003e\n\n\u003cp\u003eYes—SEM 39853 can serve as a durable final textured finish or a preparatory layer before a topcoat. If you plan to paint over it, scuff the surface lightly and use compatible primers or topcoats to ensure good adhesion and desired sheen.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFunctions as a standalone textured finish for matte black results\u003c\/li\u003e\n  \u003cli\u003eCan be topcoated—scuff and prime as needed for smooth topcoats\u003c\/li\u003e\n  \u003cli\u003eCompatible with many automotive paints when properly prepared\u003c\/li\u003e\n  \u003cli\u003eReduces need for heavy filler by concealing minor defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? SEM 39853 is suited for auto enthusiasts, restoration shops and DIYers who need a quick, professional-looking way to renew textured plastic and fiberglass parts. It’s particularly useful when you want a flexible, factory-like matte texture that resists cracking on bumpers, dash components, and exterior trim. Choose this 16 oz. aerosol when you need a reliable, easy-to-spray solution to refresh surfaces before final painting or to serve as the finished textured look.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: SEM\u003c\/li\u003e\n  \u003cli\u003eItem: 39853 Black Texture Coating Spray Aerosol\u003c\/li\u003e\n  \u003cli\u003eSize: 16 oz. aerosol, sold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is SEM 39853 suitable for flexible plastic bumpers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The formula is designed to remain flexible, minimizing cracking on flexible bumpers and trim when applied correctly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a primer before using this texture coating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For most plastics, clean and scuffing is enough; use an adhesion promoter or primer on difficult plastics for best bonding.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SEM","offers":[{"title":"Default Title","offer_id":48082981060766,"sku":"B000PL074S","price":88.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/sem-39853-front-can-16oz.jpg?v=1785821604"},{"product_id":"spraymax-2k-matte-clear-coat-spray-paint-11-2-oz-durable-non-polishable-flat-finish-uv-chemical-resistant","title":"SprayMax 2K Matte Clear Coat Spray Paint - 11.2 oz Durable Non-Polishable Flat Finish, UV \u0026 Chemical Resistant","description":"\u003cp\u003e\u003cstrong\u003eSprayMax 2K Matte Clear Coat is a two-component aerosol topcoat that delivers a durable, non-polishable matte finish for automotive and metal surfaces without a spray gun.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis professional-grade 2K matte sealer combines an acrylic-polyurethane resin system with a built-in activator, giving body shops and home builders a fast, convenient way to apply a hard-wearing flat or satin topcoat. The can is activated with a single push, so you get the protection and performance of a mixed 2-component system in an easy-to-spray aerosol. It’s formulated to resist UV, chemicals, gasoline, and the elements while retaining a consistent low-gloss appearance that modern vehicles and custom metalwork demand.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly does SprayMax 2K Matte Clear Coat dry and cure?\u003c\/h3\u003e\n\u003cp\u003eDrying is fast compared with conventional aerosols thanks to the 2-component chemistry. You can expect dust-free touch in minutes and functional handling within an hour, with full film properties developing overnight.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDust-dry in about 12 minutes under recommended conditions.\u003c\/li\u003e\n  \u003cli\u003eDry to touch typically around 80 minutes.\u003c\/li\u003e\n  \u003cli\u003eFunctional cure and mechanical strength occur after overnight drying.\u003c\/li\u003e\n  \u003cli\u003eAllow longer cure times in cold or humid environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this matte clear coat stand up to chemicals, UV and fuel exposure?\u003c\/h3\u003e\n\u003cp\u003eYes — the two-component acrylic formula is engineered for resistance to fading and chemical attack, providing a stable flat finish on exterior surfaces. It offers enhanced protection over single-component aerosols, making it suitable for vehicle exteriors and exposed metal parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFormulated for UV stability to limit yellowing or gloss change.\u003c\/li\u003e\n  \u003cli\u003eResists gasoline, oils, and common workshop chemicals.\u003c\/li\u003e\n  \u003cli\u003eProvides abrasion resistance suitable for normal road wear.\u003c\/li\u003e\n  \u003cli\u003eRecommended as a top layer over properly prepared basecoats and primers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply SprayMax 2K Matte Clear Coat for best results?\u003c\/h3\u003e\n\u003cp\u003ePreparation and technique determine the final look. Use clean, dry, and properly masked surfaces, apply multiple thin cross-coats rather than a single heavy pass, and follow the manufacturer’s recoat windows and drying guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eActivate the can per instructions, then shake thoroughly before spraying.\u003c\/li\u003e\n  \u003cli\u003eHold the can 6–8 inches from the surface and apply even, overlapping passes.\u003c\/li\u003e\n  \u003cli\u003eBuild the film with several thin layers to avoid runs and sagging.\u003c\/li\u003e\n  \u003cli\u003eDo not polish the cured matte surface; it is designed to remain non-polishable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this on motorcycles, custom parts, or small repairs?\u003c\/h3\u003e\n\u003cp\u003eAbsolutely — the aerosol format suits spot repairs, trim pieces, aftermarket panels, and full-panel refinishes. It’s particularly useful when a flat or satin aesthetic is required without the expense or setup of a spray gun and booth.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for motorcycles, car panels, door handles, and metal accessories.\u003c\/li\u003e\n  \u003cli\u003eWorks well for both small repairs and complete panel applications.\u003c\/li\u003e\n  \u003cli\u003eProvides consistent matte appearance across touch-up and full refinishes.\u003c\/li\u003e\n  \u003cli\u003eUse compatible primers and basecoats for best adhesion and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: SprayMax 2K Matte Clear Coat is aimed at professional refinishers, restoration hobbyists, and custom builders who need a dependable, non-polishable matte topcoat with chemical and UV resistance. If you want body-shop quality 2K performance in a convenient aerosol — for repair work, custom projects, or final trim touches — this product delivers a uniform flat finish and durable protection without the complexity of a spray-gun setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a hardener or reducer to use this aerosol?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No separate hardener or reducer is required; the can contains a built-in activator that is triggered before spraying.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I polish the matte finish to change its sheen?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the product cures to a non-polishable matte film; polishing will alter or damage the intended flat appearance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SprayMax","offers":[{"title":"Default Title","offer_id":48083148374174,"sku":"B0178ABUVM","price":78.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/spraymax-2k-matte-front-can.jpg?v=1785826510"},{"product_id":"car-rep-2k-polyurethane-clear-coat-aerosol-11oz-high-gloss-ready-to-use-wise-2k-technology","title":"CAR-REP 2K Polyurethane Clear Coat Aerosol 11oz — High Gloss, Ready-to-Use Wise 2K Technology","description":"\u003cstrong\u003eCAR-REP® 2K Polyurethane Clear Coat is a professional-grade, high-gloss two-component aerosol that delivers durable, corrosion-resistant clear finishes without on-site mixing.\u003c\/strong\u003e\n\n\u003cp\u003eThis ready-to-use 11oz aerosol uses CAR-REP's Wise 2K Technology to give shop-quality polyurethane protection and gloss while avoiding the hassle of activators or timed pot lives. It sprays over fully cured solvent- or waterborne base coats, dries quickly enough to be polished overnight, and is formulated for strong adhesion and long-term resistance to weather and road contaminants.\u003c\/p\u003e\n\n\u003ch3\u003eHow does CAR-REP 2K Clear Coat perform compared with conventional aerosol clears?\u003c\/h3\u003e\n\u003cp\u003eUnlike traditional single-component aerosols, this product offers true 2K polyurethane properties without field mixing. You get improved corrosion resistance, better adhesion to professional base coats, and a higher, longer-lasting gloss level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-component polyurethane chemistry in an aerosol format\u003c\/li\u003e\n  \u003cli\u003eNo activator required — eliminates timed pot life limitations\u003c\/li\u003e\n  \u003cli\u003eFaster dry-to-polish time for quicker turnaround\u003c\/li\u003e\n  \u003cli\u003eFormulated for professional automotive refinishing performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this clear coat over my existing base coat and how do I apply it?\u003c\/h3\u003e\n\u003cp\u003eApply only over fully dried solvent- or waterborne base coats. The aerosol is ready to spray right from the can—no mixing or gunwork—making it suitable for spot repairs, panels, or smaller projects where a professional clear is needed without complex setup.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure base coat is fully dry according to base product instructions\u003c\/li\u003e\n  \u003cli\u003eShake can well and spray in even, overlapping passes at recommended distance\u003c\/li\u003e\n  \u003cli\u003eAllow drying time; polish overnight if desired for extra gloss\u003c\/li\u003e\n  \u003cli\u003eWorks well for spot repairs, panels, and details on full vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat practical benefits does \"Unlimited Potlife\" and Wise 2K Technology provide?\u003c\/h3\u003e\n\u003cp\u003eUnlimited pot life means the aerosol remains stable and ready to use without a separate activator or timed chemical set, eliminating waste and simplifying workflow. The Wise 2K Technology preserves the mechanical advantages of a two-component polyurethane—toughness and adhesion—while keeping application straightforward.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNo on-site mixing reduces user error and material waste\u003c\/li\u003e\n  \u003cli\u003eConsistent spray characteristics from first to last use\u003c\/li\u003e\n  \u003cli\u003eProfessional-level durability without activation steps\u003c\/li\u003e\n  \u003cli\u003eSuitable for technicians and experienced DIYers seeking quality results\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long before I can handle, sand, or polish the finish?\u003c\/h3\u003e\n\u003cp\u003eDrying times depend on temperature and film thickness, but the formula is engineered to cure fast enough for light sanding and polishing within a short window—often overnight. This rapid rework time helps speed repairs and reduces turnaround on production tasks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTypical dry-to-touch and recoat windows vary by environment\u003c\/li\u003e\n  \u003cli\u003eRecommended cure and polish timing: test on a sample panel or follow shop practice\u003c\/li\u003e\n  \u003cli\u003ePolishable overnight under normal shop conditions\u003c\/li\u003e\n  \u003cli\u003eFinal hardness and chemical resistance increase over several days\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? CAR-REP® 2K Polyurethane Clear Coat in the 11oz aerosol is designed for automotive technicians, body shop professionals, and experienced DIYers who want a genuine two-component polyurethane finish without the complexity of mixing activators. It's ideal for spot repairs, panel refinishing, and situations where professional-grade corrosion resistance, gloss, and adhesion are required but a compact, easy-to-use aerosol solution is preferred. If you need a fast, high-gloss protective clear with professional durability and minimal setup, this product delivers those benefits in a convenient can.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to mix or add an activator before spraying?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. CAR-REP Wise 2K Technology requires no mixing or activator—it's ready to spray from the can.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply this over waterborne base coats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Apply only over fully dried waterborne or solvent base coats for best adhesion and finish.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CAR-REP","offers":[{"title":"Default Title","offer_id":48083199885470,"sku":"B08WPFM6KK","price":79.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/car-rep-2k-clear-front-can.jpg?v=1785828383"},{"product_id":"era-paints-2k-high-gloss-clear-coat-spray-can-1-can-aerosol-catalyst-activated-durable-gloss-uv-resistance","title":"ERA Paints 2K High Gloss Clear Coat Spray Can - 1-Can Aerosol, Catalyst-Activated Durable Gloss \u0026 UV Resistance","description":"\u003cp\u003e\u003cstrong\u003eERA Paints 2K High Gloss Clear Coat Spray is a catalyst-activated aerosol that delivers a durable, showroom-quality high gloss finish for automotive, motorcycle, and custom projects.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-can 2K (two-component) clear coat pairs a built-in hardener with a premium resin formula to produce a harder, more protective top layer than standard 1K sprays. Designed for DIYers and pros who want a fast, portable application, the aerosol setup gives you the chemical performance of a multi-part system without the need for separate mixing cups or a spray gun—just shake, unlock, and spray. It’s formulated in the USA to resist yellowing, resist chemicals and UV exposure, and maintain deep gloss over time.\u003c\/p\u003e\n\n\u003ch3\u003eHow does a 2K clear coat differ from a regular spray clear?\u003c\/h3\u003e\n\u003cp\u003eA 2K clear coat contains a catalyst that activates cross-linking during cure, creating a tougher film than single-component clears. This chemical cure improves hardness, chemical resistance, and long-term durability while retaining high gloss and clarity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCatalyst-activated chemistry for a stronger cured film\u003c\/li\u003e\n  \u003cli\u003eImproved resistance to fuels, solvents, and road contaminants\u003c\/li\u003e\n  \u003cli\u003eLess prone to yellowing versus economy 1K clears\u003c\/li\u003e\n  \u003cli\u003eDelivers a deeper reflective gloss that preserves color tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs the aerosol easy to apply for non-professionals?\u003c\/h3\u003e\n\u003cp\u003eYes—ERA Paints engineered the can with a DIY-friendly fan nozzle and a pre-measured catalyst system so you don’t need complex mixing. With basic surface prep and light practice, you can achieve smooth, even coats with minimal runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePremium fan nozzle produces consistent wide pattern\u003c\/li\u003e\n  \u003cli\u003eBuilt-in hardener prevents measuring errors and waste\u003c\/li\u003e\n  \u003cli\u003eFast flash times let you build multiple coats quickly\u003c\/li\u003e\n  \u003cli\u003eCan be applied to painted and primed substrates following instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does this clear coat provide outdoors?\u003c\/h3\u003e\n\u003cp\u003eERA Paints 2K High Gloss Clear Coat seals paint with a resilient top layer formulated to resist UV degradation, chemical attack, and common road hazards. It’s intended to extend finish life and preserve gloss on vehicles exposed to sun, salt, and grime.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-resistant resins reduce fading and chalking\u003c\/li\u003e\n  \u003cli\u003eChemical-resistant film withstands fuels and solvents\u003c\/li\u003e\n  \u003cli\u003eHard, flexible finish resists chipping from debris\u003c\/li\u003e\n  \u003cli\u003eMaintains high gloss and clarity under harsh conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I get the best results with a single spray can?\u003c\/h3\u003e\n\u003cp\u003ePreparation and technique matter: clean and scuff the surface, use tack cloths, and apply several light, overlapping passes rather than one heavy coat. Allow proper flash and cure time according to temperature for maximum hardness and gloss.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and sand to recommended grit before spraying\u003c\/li\u003e\n  \u003cli\u003eShake thoroughly and follow the can’s activation\/priming steps\u003c\/li\u003e\n  \u003cli\u003eHold can at recommended distance and use slow, steady passes\u003c\/li\u003e\n  \u003cli\u003eObserve ambient temperature and humidity cues for curing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: ERA Paints 2K High Gloss Clear Coat Spray is aimed at car and motorcycle hobbyists, custom builders, and repair technicians who need a portable, pro-level clear without a spray gun. It’s ideal for spot repairs, small panels, touch-ups, and finishing custom jobs where a deep, long-lasting gloss and extra protection are important but a full-shop spray rig isn’t practical. If you want improved chemical resistance, UV stability, and a harder cured surface compared with conventional 1K aerosols, this product provides a convenient, high-value solution made with premium resins in the USA.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this 2K aerosol over fresh paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—apply over properly cured OEM or basecoat paint according to surface prep and flash time instructions for best adhesion and finish.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What surfaces is this clear coat compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Designed for painted and primed automotive substrates, metal, and fiberglass when prepared correctly; not intended for bare plastic without primer.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ERA Paints","offers":[{"title":"Default Title","offer_id":48083233898654,"sku":"B0B4HPTGK7","price":93.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/era-paints-front-can-label.jpg?v=1785829233"},{"product_id":"genlexon-dry-guide-coat-powder-7-23oz-extra-large-black-high-contrast-dry-finishing-powder-with-gloves-sponges","title":"GENLEXON Dry Guide Coat Powder 7.23oz Extra-Large Black — High-Contrast dry finishing powder with gloves \u0026 sponges","description":"\u003cp\u003e\u003cstrong\u003eGENLEXON’s 7.23oz (205g) Premium Dry Guide Coat Powder is a high-contrast black finishing powder kit that instantly reveals scratches, pinholes and low spots during wet or dry auto body sanding and arrives with gloves and polishing sponges so you can start work immediately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen preparing automotive panels for paint or clearcoat, seeing every tiny defect matters. This large-capacity dry guide coat powder was formulated to show subtle surface irregularities without the wait or mess of liquid sprays. The set includes three disposable gloves and two polishing sponges so you can sand, inspect and refine surfaces with fewer interruptions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this guide coat help me find defects faster?\u003c\/h3\u003e\n\u003cp\u003eThe black powder settles into low areas and scratches to produce stark contrast against primer or light-colored panels, making even faint imperfections visible at a glance. Because it’s a dry formula, there’s no drying interval—inspect immediately after application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDark pigment highlights pinholes and sanding marks quickly\u003c\/li\u003e\n  \u003cli\u003eDry application prevents streaks and pooling on vertical panels\u003c\/li\u003e\n  \u003cli\u003eWorks on both primer and painted surfaces for versatile inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it with wet sanding or dry sanding methods?\u003c\/h3\u003e\n\u003cp\u003eThis guide coat is compatible with either approach. The ultra-fine particle size brushes into surface depressions without clumping, so it won’t clog abrasive sheets during wet or dry sanding processes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClog-resistant powder grain for uninterrupted sanding\u003c\/li\u003e\n  \u003cli\u003eSuitable for water-assisted sanding and standard dry paper\u003c\/li\u003e\n  \u003cli\u003eLeaves clear contrast even after light wiping or rinsing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools and extras come in the kit and why are they useful?\u003c\/h3\u003e\n\u003cp\u003eThe kit contains three disposable gloves and two polishing sponges to streamline prep work and reduce tool runs. Gloves protect hands from pigment and improve grip while sanding; sponges help blend edges and remove residue.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThree gloves for immediate protection and multiple panels\u003c\/li\u003e\n  \u003cli\u003eTwo finishing sponges for feathering and polishing transitions\u003c\/li\u003e\n  \u003cli\u003e205 g (7.23 oz) container—ample for several medium or multiple small projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this product suit beginners versus experienced technicians?\u003c\/h3\u003e\n\u003cp\u003eThe formula’s strong visual feedback shortens the learning curve for novices while providing pros with a dependable, high-capacity option for repeated use. Its dry, no-wait application speeds up workflows in busy shops and home garages alike.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-contrast feedback helps beginners locate flaws faster\u003c\/li\u003e\n  \u003cli\u003eLarge volume reduces repeat purchases for professionals\u003c\/li\u003e\n  \u003cli\u003eNo messy sprays means easier cleanup and fewer prep steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This GENLEXON guide coat powder set is aimed at automotive repair shops, restoration hobbyists, and DIY detailers who need a reliable, easy-to-use inspection aid. It’s well suited for anyone preparing panels for paint or clearcoat—especially where fast turnaround and visible defect detection are priorities. The included gloves and sponges make it a ready-to-use kit for single-operator garages and professional booths alike.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this guide coat safe for wet sanding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The fine, clog-resistant powder works with water-assisted sanding as well as dry sanding without gumming abrasives.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much product is included and how many projects will it cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit contains 205 g (7.23 oz) of powder; enough for several medium-sized panels or many small touch-ups depending on usage.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GENLEXON","offers":[{"title":"Default Title","offer_id":48084596916382,"sku":"B0G2M4LMKS","price":63.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/genlexon-front-packaging.jpg?v=1785860490"},{"product_id":"dunkive-guide-coat-powder-for-auto-sanding-5-3-oz-150g-dry-black-ultra-fine-for-wet-dry-sanding-and-low-clogging","title":"Dunkive Guide Coat Powder for Auto Sanding 5.3 oz (150g) — Dry Black, Ultra-Fine for Wet\/Dry Sanding and Low Clogging","description":"\u003cp\u003e\u003cstrong\u003eDunkive 5.3 oz (150g) Guide Coat Powder is a dry black powder that makes scratches, pinholes and low spots clearly visible so you can sand and prep automotive surfaces faster and more accurately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen preparing panels for primer, paint or bodywork, spotting imperfections early saves time and improves finish quality. This Dunkive guide coat delivers high-contrast visibility without drying time, works in both wet and dry sanding, and uses a very fine black powder that helps reduce clogging of abrasives. The kit includes a 150g refill bottle, a clear protective lid and a pair of nitrile gloves for tidy application.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this guide coat reveal imperfections during sanding?\u003c\/h3\u003e\n\n\u003cp\u003eThe black pigment lays into low spots and scratches so they stand out against the surrounding surface as you sand. Because the powder is dry, it immediately contrasts with the substrate and shows where additional material needs removal or filling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFine black particles settle into pinholes and low areas for instant visibility.\u003c\/li\u003e\n  \u003cli\u003eCreates sharp contrast on primer, filler and bare metal surfaces.\u003c\/li\u003e\n  \u003cli\u003eWorks with both coarse and fine abrasives to track progress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it for wet sanding as well as dry sanding?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the formulation is designed to perform in both wet and dry sanding workflows, giving consistent feedback whether you’re using lubricated paper or sanding dry. This flexibility lets you move between stages without switching inspection products.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePerforms reliably with lubricants during wet sanding checks.\u003c\/li\u003e\n  \u003cli\u003eMaintains contrast when used in dry sanding passes.\u003c\/li\u003e\n  \u003cli\u003eSuitable for different substrate types and repair stages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the powder clog my sandpaper or abrasives?\u003c\/h3\u003e\n\n\u003cp\u003eThe powder is ultra-fine and formulated to minimize abrasive clogging so you can maintain effective cutting and a cleaner finish. It spreads evenly and reduces heavy buildup that can prematurely blind sandpaper.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUltra-fine granules reduce adhesion to abrasive media.\u003c\/li\u003e\n  \u003cli\u003eHelps preserve cutting rate and consistent sanding performance.\u003c\/li\u003e\n  \u003cli\u003eEnables longer useful life from sanding discs and sheets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply the Dunkive guide coat and what’s included?\u003c\/h3\u003e\n\n\u003cp\u003eApplication is simple: remove the protective cap, lightly dust the surface, then sand; there’s no drying or masking required. The bottle’s size and included gloves make it suitable for shop or garage use and easy clean-up.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIncludes a 150g bottle of dry black guide coat powder.\u003c\/li\u003e\n  \u003cli\u003eComes with a clear protective lid to prevent spills in storage.\u003c\/li\u003e\n  \u003cli\u003eSingle pair of nitrile gloves provided for clean handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: Professionals and DIYers who need a fast, low-mess method to check surface flatness and detect defects before priming or painting. The Dunkive guide coat suits body shops, restoration projects, detailing, and anyone seeking improved accuracy in sanding and refinishing tasks without waiting for coatings to dry.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need to wait for the powder to dry before sanding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No—this dry guide coat requires no drying or masking and can be sanded immediately after application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the powder safe for both wet and dry sanding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the formulation works effectively in both wet and dry sanding environments for consistent inspection.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Dunkive","offers":[{"title":"Default Title","offer_id":48084619657374,"sku":"B0GL1M29HQ","price":59.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/dunkive-front-packaging-guide-coat.jpg?v=1785860920"},{"product_id":"u-pol-clear-coat-spray-clear-1-450-ml-high-gloss-2k-fast-dry-uv-resistant","title":"U-POL Clear Coat Spray CLEAR#1 450 ml — High-Gloss 2K Fast-Dry, UV-Resistant","description":"\u003cp\u003e\u003cstrong\u003eU-POL CLEAR#1 is a fast-drying, high-build 2K clear coat in a 450 ml aerosol that delivers a glossy, spray-gun quality finish with UV resistance and compatibility with modern basecoats.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for professional and enthusiast use, this U-POL aerosol clear coat offers a convenient way to apply a durable, shiny top layer without the need for a separate mixing cup or spray gun. The formula works smoothly over waterborne and conventional basecoats and ties into existing two-component clear systems for blend repairs. Its high-build capacity reduces the number of passes required while the clog-resistant nozzle keeps spray patterns consistent.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will I get a cured glossy finish?\u003c\/h3\u003e\n\u003cp\u003eThis clear coat is engineered to dry faster than many conventional aerosols, producing a tack-free surface suitable for light handling in a short time. Final hardness develops over hours depending on temperature and humidity; warmer, dryer conditions accelerate the process.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFast-dry formulation for quicker handling\u003c\/li\u003e\n  \u003cli\u003eHigh-build coverage reduces multiple coats\u003c\/li\u003e\n  \u003cli\u003eTemperature and humidity affect full cure time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use CLEAR#1 over water-based basecoats and blend into existing 2K clears?\u003c\/h3\u003e\n\u003cp\u003eYes — the product is compatible with modern waterborne base layers and designed to blend with other two-component clear coats for spot repairs and resprays. Always test in an inconspicuous area first and follow recommended surface preparation steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks over water-based basecoats with proper prep\u003c\/li\u003e\n  \u003cli\u003eBlends into existing 2K clear systems for seamless repairs\u003c\/li\u003e\n  \u003cli\u003ePerform adhesion test when switching brands or systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finish and performance can I expect from the spray?\u003c\/h3\u003e\n\u003cp\u003eExpect a deep, high-gloss appearance similar to a spray-gun application when applied with correct technique. The clear adds protective qualities and helps resist UV degradation that can dull paint over time, while the nozzle design minimizes clogging for even atomization.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-gloss, spray-gun quality shine\u003c\/li\u003e\n  \u003cli\u003eUV-resistant formulation to maintain gloss longer\u003c\/li\u003e\n  \u003cli\u003eClog-free nozzle for consistent spray patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply it for best results?\u003c\/h3\u003e\n\u003cp\u003eFor a professional-looking outcome, apply several light, overlapping passes rather than one heavy coat, keeping the can 6–10 inches from the surface. Allow recommended flash times between passes and ensure the substrate is clean, dry, and properly sanded or scuff-marked as needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHold can 6–10 inches from the surface\u003c\/li\u003e\n  \u003cli\u003eUse multiple light coats with flash time between passes\u003c\/li\u003e\n  \u003cli\u003eEnsure surface is clean, dry, and prepared beforehand\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: U-POL CLEAR#1 450 ml is aimed at collision repair shops, bodywork professionals, and skilled DIYers who need a portable, professional-grade clear coat for spot repairs, panels and small resprays. It suits users who require a fast-drying, high-build aerosol that works with modern waterborne systems and integrates with existing two-component clears.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is U-POL CLEAR#1 compatible with water-based basecoats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It is formulated to work over water-based basecoats when the surface is properly prepared and tested first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does it take to dry enough for handling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dry time is fast compared with standard aerosols; light handling can often be done within a few hours depending on temperature and humidity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"U-POL","offers":[{"title":"Default Title","offer_id":48084764197022,"sku":"B009LHER0M","price":65.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/u-pol-clear1-front-aerosol-can.jpg?v=1785862293"},{"product_id":"touchupdirect-high-gloss-clearcoat-aerosol-spray-can-fast-drying-protective-automotive-topcoat-uv-resistant","title":"TouchUpDirect High Gloss Clearcoat Aerosol Spray Can — Fast-Drying Protective Automotive Topcoat, UV-Resistant","description":"\u003cp\u003e\u003cstrong\u003eTouchUpDirect High Gloss Clearcoat Aerosol Spray Can is a fast-drying, high-gloss automotive topcoat designed to restore shine and protect repaired areas on cars and motorcycles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you want a smooth, showroom-style finish without a body-shop bill, this clearcoat aerosol gives a durable protective layer that blends over touch-ups, chips, and small scratches. Formulated to pair with TouchUpDirect Colorcoat and Primer, it seals color repairs and leaves a glossy, uniform surface that resists the elements. The spray can format makes it simple to control application on spot repairs, panel edges, and small panels where professional spray guns aren’t practical.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this clearcoat improve the look of small paint repairs?\u003c\/h3\u003e\n\n\u003cp\u003eApplying a high-quality clearcoat restores depth and gloss to patched areas so they better match the surrounding factory finish. The product levels well and fills minor texture differences from color touch-up, producing a seamless appearance when correctly applied. It reduces the contrast between repaired spots and undamaged paint, making imperfections less noticeable.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCreates a glossy, uniform finish that blends repairs into the original paint\u003c\/li\u003e\n  \u003cli\u003eFills minor texture unevenness from basecoat applications\u003c\/li\u003e\n  \u003cli\u003eLevels quickly for a smooth, professional-looking surface\u003c\/li\u003e\n  \u003cli\u003eWorks over TouchUpDirect Colorcoat and compatible primers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the aerosol clearcoat under everyday conditions?\u003c\/h3\u003e\n\n\u003cp\u003eThis clearcoat is formulated to resist common environmental stressors so repaired areas stay protected longer. It helps shield paint from UV exposure, moisture, and road contaminants that can accelerate paint degradation. When applied and cured correctly, it provides a resilient barrier that helps maintain gloss and color integrity over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eUV-resistant formula to slow fading and chalking\u003c\/li\u003e\n  \u003cli\u003eProtects against rain, salt, and light abrasions\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor automotive exposure and routine washing\u003c\/li\u003e\n  \u003cli\u003eBest results when combined with recommended prep and touch-up steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the best way to apply this aerosol for a professional result?\u003c\/h3\u003e\n\n\u003cp\u003ePreparation and technique determine the finish quality: clean, sand, and degrease the area before applying multiple thin coats. Hold the can at the recommended distance and use even, overlapping passes to avoid runs or orange-peel texture. Allow proper flash time between coats and follow the full cure time before polishing or waxing for optimum hardness and shine.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eClean repair area thoroughly and remove wax, grease, and loose paint\u003c\/li\u003e\n  \u003cli\u003eLightly sand edges and feather basecoat transitions for adhesion\u003c\/li\u003e\n  \u003cli\u003eSpray several light passes rather than one heavy coat to prevent runs\u003c\/li\u003e\n  \u003cli\u003eObserve manufacturer flash and cure times before handling or polishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this clearcoat on motorcycles and other painted surfaces?\u003c\/h3\u003e\n\n\u003cp\u003eYes — the aerosol clearcoat is suitable for cars, motorcycles, and a variety of painted metal and rigid plastic surfaces when compatible with the underlying paint. It pairs best with TouchUpDirect Colorcoat systems but will also top many OEM and aftermarket basecoats. Test in an inconspicuous spot when working with unfamiliar materials to confirm adhesion and appearance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSafe for automotive body panels and motorcycle fenders when properly prepped\u003c\/li\u003e\n  \u003cli\u003eWorks over OEM and most aftermarket basecoat systems—test before full use\u003c\/li\u003e\n  \u003cli\u003eNot intended for flexible vinyl or soft plastics without compatibility testing\u003c\/li\u003e\n  \u003cli\u003eIdeal for spot repairs, panel touch-ups, and small cosmetic fixes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The TouchUpDirect High Gloss Clearcoat Aerosol is designed for car owners, motorcycle riders, and DIY enthusiasts who want a cost-effective way to finish paint repairs with a high-gloss, protective topcoat. It’s a practical choice for hobbyists and weekend mechanics who value easy application and long-lasting results, as well as professional detailers needing a reliable aerosol for small-area refinishing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until the clearcoat is dry to the touch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Touch-dry in about 20–30 minutes under normal conditions; allow full cure 24–48 hours before light handling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this clearcoat work over existing factory paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, it tops most factory and aftermarket basecoats when surfaces are properly prepped and compatibility-tested.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"TouchUpDirect","offers":[{"title":"Default Title","offer_id":48085535490206,"sku":"B0BTK8BRWP","price":63.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/touchupdirect-clearcoat-front-can.jpg?v=1785871923"},{"product_id":"sem-saddle-tan-color-coat-12-oz-aerosol-flexible-fade-resistant-vinyl-plastic-finish","title":"SEM Saddle Tan Color Coat 12 oz aerosol — flexible, fade-resistant vinyl \u0026 plastic finish","description":"\u003cstrong\u003eSEM 15033 Saddle Tan Color Coat is a 12 oz. flexible, fade-resistant coating designed to restore or change the color of vinyl, plastics, carpet and velour without using dye.\u003c\/strong\u003e\n\n\u003cp\u003eThis aerosol Color Coat from SEM provides a permanent-feeling finish that remains flexible after curing, making it suitable for both soft and rigid surfaces in automotive, marine and interior applications. Unlike dyes that soak into fibers, this product lays down a pigmented elastomeric film that resists fading and stays bonded through normal flexing and handling. It’s formulated to adhere to a wide range of substrates when proper surface preparation is followed.\u003c\/p\u003e\n\n\u003ch3\u003eWhat surfaces will this Saddle Tan Color Coat work on?\u003c\/h3\u003e\n\u003cp\u003eSEM 15033 is engineered to cover most vinyl (including soft upholstery), flexible and rigid plastics, velour and some carpet fibers. It is especially useful when the goal is to change or refresh a surface color rather than dye it. Always test on a small, inconspicuous area first to confirm adhesion and appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSoft vinyl seating and trim\u003c\/li\u003e\n  \u003cli\u003eRigid plastic panels and moldings\u003c\/li\u003e\n  \u003cli\u003eVelour and select carpet fibers\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM and aftermarket interior surfaces after prep\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and apply the 12 oz. aerosol for best results?\u003c\/h3\u003e\n\u003cp\u003eSurface prep is critical: clean thoroughly, remove loose coatings, and lightly scuff glossy areas to promote mechanical adhesion. Apply multiple thin passes from the recommended distance, allowing flash time between coats. Curing times vary by temperature and humidity; follow instructions for tack-free and fully cured intervals before heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and clean with recommended SEM preparer\u003c\/li\u003e\n  \u003cli\u003eScuff glossy surfaces with fine abrasives\u003c\/li\u003e\n  \u003cli\u003eShake can vigorously for one minute after mixing ball rattles\u003c\/li\u003e\n  \u003cli\u003eSpray several light coats, keeping even distance and overlap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect—durability, flexibility and finish?\u003c\/h3\u003e\n\u003cp\u003eThe Color Coat forms an elastomeric film that remains flexible to accommodate bending and stretching common to vinyl and some plastics. It’s engineered for fade resistance and long-lasting color retention under normal conditions. The finish is uniform and hides wear, though extreme abrasion or chemical exposure can compromise it over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexible film resists cracking on flexible substrates\u003c\/li\u003e\n  \u003cli\u003eFade-resistant pigments retain color under typical light exposure\u003c\/li\u003e\n  \u003cli\u003ePigmented coating conceals discoloration and scuffs\u003c\/li\u003e\n  \u003cli\u003eNot intended as a heavy-wear topcoat in high-abrasion zones\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? SEM 15033 Saddle Tan Color Coat is ideal for technicians, restoration specialists and DIYers who need a reliable aerosol solution to refresh or change interior and trim colors on vehicles, boats and furniture. If you require a pigment-based, flexible coating that bonds to a variety of vinyls, plastics and fabrics after proper prep, this 12 oz. aerosol provides a convenient, professional-grade option. For unfamiliar substrates or critical restorations, perform a small test and consult SEM technical guidance for best practices.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is SEM Color Coat a dye or a paint?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: SEM Color Coat is a pigmented elastomeric coating, not a dye; it lays a flexible film on surfaces rather than soaking into fibers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on car seats and plastic trim?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—when surfaces are properly cleaned and scuffed, it adheres to most vinyl seats and many rigid and flexible plastics.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SEM","offers":[{"title":"Default Title","offer_id":48086150545566,"sku":"B00063VKQ4","price":74.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/sem-15033-saddle-tan-front-can.jpg?v=1785886930"},{"product_id":"sem-satin-clear-color-coat-12-oz-satin-finish-protective-clear-for-vinyl-plastic-trim-reduces-glare","title":"SEM Satin Clear Color Coat 12 oz — Satin Finish Protective Clear for Vinyl \u0026 Plastic Trim, Reduces Glare","description":"\u003cp\u003e\u003cstrong\u003eSEM 13013 Satin Clear Color Coat is a 12 oz. satin-gloss protective clear formulated to adjust sheen and add a durable top layer to refinished vinyl and plastic surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen restoring interior trim, instrument panels, door panels or other vinyl and plastic parts, finish consistency and surface protection matter. SEM's Color Coat clears are made to fine-tune gloss level while adding an even, resilient overcoat that preserves color and feel. The 12 oz. size is convenient for spot repairs and small projects where controlled coverage is important.\u003c\/p\u003e\n\n\u003ch3\u003eHow does SEM 13013 Satin Clear color coat affect surface gloss and appearance?\u003c\/h3\u003e\n\u003cp\u003eThis satin clear is formulated to reduce high-gloss reflections while keeping color depth and clarity intact. It delivers a soft sheen that looks factory-correct on many interior components without appearing flat or chalky.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProduces a uniform satin finish for a natural look\u003c\/li\u003e\n  \u003cli\u003eMaintains pigment vibrancy under the clear layer\u003c\/li\u003e\n  \u003cli\u003eMinimizes light glare on dashboards and trim\u003c\/li\u003e\n  \u003cli\u003eApplies smoothly to avoid brush or roll marks when used as directed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection and durability does this clear coat provide?\u003c\/h3\u003e\n\u003cp\u003eAs a protective topcoat, SEM 13013 helps shield refinished vinyl and plastic from daily wear and light abrasion. It resists scuffs and helps preserve the underlying color and texture for longer when compared to untreated surfaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdds an abrasion-resistant barrier over touch points\u003c\/li\u003e\n  \u003cli\u003eHelps resist staining from common interior contaminants\u003c\/li\u003e\n  \u003cli\u003eImproves longevity of repairs and cosmetic refinishes\u003c\/li\u003e\n  \u003cli\u003eDesigned for compatibility with SEM Color Coat base layers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply SEM 13013 Satin Clear for best results?\u003c\/h3\u003e\n\u003cp\u003eFor consistent results, apply to a clean, dry surface that has been prepared according to SEM's instructions; thin, even coats work best. Allow proper flash and cure times between coats to avoid runs and to achieve the intended satin level.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse light, overlapping passes for even coverage\u003c\/li\u003e\n  \u003cli\u003eApply multiple thin coats rather than one heavy coat\u003c\/li\u003e\n  \u003cli\u003eFollow recommended drying\/cure times for handling and full durability\u003c\/li\u003e\n  \u003cli\u003eCompatible with spray application tools for small-area touch-ups\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill SEM 13013 work on all vinyl and plastic types inside a vehicle?\u003c\/h3\u003e\n\u003cp\u003eSEM 13013 is formulated for common automotive interior vinyl and many plastics used in trim pieces, but surface preparation and compatibility checks are important. Test in an inconspicuous area first to confirm adhesion and finish appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for dashboards, door panels, consoles, and trim\u003c\/li\u003e\n  \u003cli\u003ePerform a small adhesion test before full application\u003c\/li\u003e\n  \u003cli\u003eNot intended for structural plastic repair; cosmetic refinishing only\u003c\/li\u003e\n  \u003cli\u003eWorks best over SEM Color Coat or similar compatible bases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: SEM 13013 Satin Clear Color Coat is aimed at automotive restorers, collision repair technicians and DIY enthusiasts who need a satin protective topcoat for vinyl and plastic touch-ups. If you want to reduce glare, unify sheen across repaired areas, and add a resilient finish without altering color, this 12 oz. satin clear offers controlled coverage suitable for small to mid-size refinishing jobs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can SEM 13013 be sprayed or brushed?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it can be sprayed for the most uniform finish and lightly brushed for small touch-ups; thin, even coats are recommended.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before the finished surface can be handled?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Handle time varies; allow recommended flash and tack-free times, typically a few hours, with full cure longer depending on conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SEM","offers":[{"title":"Default Title","offer_id":48086164242590,"sku":"B000PL24KI","price":67.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/sem-satin-clear-bottle-front.jpg?v=1785887814"},{"product_id":"fortivo-guide-coat-powder-for-auto-body-sanding-black-200g-ultra-fine-wet-dry","title":"FORTIVO Guide Coat Powder for Auto Body Sanding, Black 200g — Ultra-Fine, Wet \u0026 Dry","description":"\u003cp\u003e\u003cstrong\u003eFORTIVO Dry Guide Coat Powder is a fine black powder that quickly reveals scratches, pinholes, low spots and other surface defects for wet or dry auto body sanding.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis extra-large 200g pack of black guide coat powder is formulated to give sharp contrast against primer and paint, helping you spot and correct imperfections before primer, filler or final paint. The dry, ultra-fine consistency minimizes clogging, works without drying time or masking, and ships with nitrile gloves so you can apply it cleanly and confidently.\u003c\/p\u003e\n\n\u003ch3\u003eHow does FORTIVO guide coat powder make defect spotting easier?\u003c\/h3\u003e\n\u003cp\u003eThe high-contrast black pigment sits on the surface and highlights any changes in contour, allowing visual detection of scratches, low spots and pinholes that sanding alone can miss. Because the particles are ultra-fine, they settle evenly and won’t smear or hide flaws.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack color for maximum contrast against light primers and paint\u003c\/li\u003e\n  \u003cli\u003eFine particle size for even coverage without clumps\u003c\/li\u003e\n  \u003cli\u003eShows surface transitions, edges and shallow depressions instantly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this guide coat for both wet and dry sanding?\u003c\/h3\u003e\n\u003cp\u003eYes—FORTIVO’s formulation is compatible with both wet and dry sanding methods. The powder won’t require drying time or special mask-off steps, so you can sand immediately after application whether you’re using abrasive paper dry or with water.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for dry sanding workflows for speed and convenience\u003c\/li\u003e\n  \u003cli\u003eWorks with wet sanding to reduce dust and improve visibility\u003c\/li\u003e\n  \u003cli\u003eMaintains visibility when rinsed during wet sanding cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply and remove the powder to get accurate results?\u003c\/h3\u003e\n\u003cp\u003eLightly sprinkle or dust the powder across the area to be checked, then gently wipe or blow off the excess before sanding. After sanding, clean the panel with a tack cloth or water, and use the included nitrile gloves to avoid transferring oils from your hands to the surface.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply sparingly for best contrast without build-up\u003c\/li\u003e\n  \u003cli\u003eRemove excess powder before starting aggressive sanding\u003c\/li\u003e\n  \u003cli\u003eClean the surface after verification and before final finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes this 200g pack practical for pros and hobbyists?\u003c\/h3\u003e\n\u003cp\u003eThe 200g quantity provides enough material for many repair cycles without frequent reorders, and the dry, low-clog formula keeps abrasives working longer. Inclusion of nitrile gloves helps maintain a contaminant-free process from the first application through inspection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e200g size balances economy and portability for shops and home users\u003c\/li\u003e\n  \u003cli\u003eDry powder avoids wet-masking steps, saving time\u003c\/li\u003e\n  \u003cli\u003eGloves included to protect surface cleanliness during use\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: FORTIVO Dry Guide Coat Powder is designed for automotive body technicians, collision repair shops, paint professionals and serious DIYers who need a reliable way to locate and correct surface flaws before primer or color coats. If you want faster inspection, fewer sanding passes and a cleaner workflow for wet or dry sanding, this guide coat delivers an efficient, economical solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is FORTIVO guide coat suitable for wet sanding?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The powder works with both wet and dry sanding and remains visible when rinsed during wet sanding cycles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much product is included and are gloves provided?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: This pack contains 200g of dry black guide coat powder and includes nitrile gloves for clean application.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FORTIVO","offers":[{"title":"Default Title","offer_id":48086192947358,"sku":"B0D4C65SFP","price":72.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/fortivo-front-packaging-dry-guide-coat.jpg?v=1785889314"},{"product_id":"spraymax-2k-glamour-high-gloss-clear-coat-spray-11-8-oz-2-component-uv-chemical-resistant-automotive-finish","title":"SprayMax 2K Glamour High Gloss Clear Coat Spray — 11.8 oz 2-component, UV \u0026 Chemical Resistant Automotive Finish","description":"\u003cp\u003e\u003cstrong\u003eSprayMax 2K Glamour High Gloss Clear Coat is a two-component aerosol clear that delivers a durable, mirror-like automotive topcoat with fast curing and strong resistance to UV, gasoline, and chemicals.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis ready-to-spray 2K clearcoat comes preloaded in an 11.8 oz aerosol can — simply activate the internal hardener, shake and apply. It’s engineered to produce spray-gun-quality flow and leveling without a compressor, making it a convenient option for refinishing, repairs, and custom work over properly applied basecoats. The transparent, high-gloss finish is polishable and built to withstand weathering and everyday exposure.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this 2K aerosol differ from regular single-component clears?\u003c\/h3\u003e\n\u003cp\u003eUnlike conventional one-component aerosols, the SprayMax 2K system contains a separate hardener that is mixed inside the can before use, creating a crosslinked polyurethane film when cured. That chemical crosslinking gives it greater chemical and abrasion resistance compared with standard clears, while still being applied like a spray paint.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal activator for true two-component curing\u003c\/li\u003e\n  \u003cli\u003ePolyurethane chemistry for improved durability\u003c\/li\u003e\n  \u003cli\u003eSpray-gun-style fan nozzle for smooth coverage\u003c\/li\u003e\n  \u003cli\u003eNo external mixing cups or equipment required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surface prep and compatibility should I expect?\u003c\/h3\u003e\n\u003cp\u003eSprayMax 2K Glamour Clear is intended for application over properly cured and prepared basecoats. Surfaces must be clean, dry, and free of contaminants; light sanding between coats improves adhesion and appearance. Avoid applying directly to bare metal without an appropriate primer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse over compatible automotive basecoats and OEM paint systems\u003c\/li\u003e\n  \u003cli\u003eClean with wax-and-grease remover; dry thoroughly\u003c\/li\u003e\n  \u003cli\u003eSanding recommended: fine grit between basecoat and clear\u003c\/li\u003e\n  \u003cli\u003ePrime bare substrates before basecoat application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does it take to dry and when can I handle the parts?\u003c\/h3\u003e\n\u003cp\u003eDrying is fast for a two-component aerosol: the product is typically dust-dry within about 20 minutes under normal shop conditions. Full handling and assembly times vary with temperature and film thickness but are generally within 8–24 hours; the finish is also polishable after proper curing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDust-dry: approximately 20 minutes\u003c\/li\u003e\n  \u003cli\u003eAssembly\/handling: commonly 8–24 hours depending on conditions\u003c\/li\u003e\n  \u003cli\u003eImproved hardness with full cure over several days\u003c\/li\u003e\n  \u003cli\u003ePolish after recommended cure time for deeper gloss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protections does this clearcoat provide for vehicles?\u003c\/h3\u003e\n\u003cp\u003eThe polyurethane 2K formula resists yellowing from sunlight and stands up to fuel, oils, and many chemicals better than typical aerosol clears. Its leveling properties create a smooth, reflective surface that improves overall longevity of the topcoat, helping maintain appearance in outdoor conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-resistant formulation to reduce yellowing\u003c\/li\u003e\n  \u003cli\u003eImproved gasoline and chemical resistance versus 1K clears\u003c\/li\u003e\n  \u003cli\u003eAbrasion and weather resistance for outdoor exposure\u003c\/li\u003e\n  \u003cli\u003eHigh gloss finish that enhances color depth and clarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: SprayMax 2K Glamour High Gloss Clear Coat suits professional refinishers, experienced DIYers, and custom shops wanting 2K durability in an aerosol format. It’s ideal for spot repairs, small panels, custom touches, motorcycles, and anyone needing a polished, long-lasting topcoat without renting spray equipment. Ensure you follow proper safety procedures and substrate preparation for best results.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I apply SprayMax 2K over any basecoat?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use it over properly cured and compatible automotive basecoats. Do not apply directly to bare metal—prime first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long until the clearcoat is safe to handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Dust-dry in about 20 minutes; parts are typically ready for handling or assembly within 8–24 hours depending on conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SprayMax","offers":[{"title":"Default Title","offer_id":48086199337118,"sku":"B0082LJMC6","price":72.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/spraymax-2k-glamour-front-can.jpg?v=1785889560"},{"product_id":"spraymax-2k-high-gloss-clearcoat-aerosol-2-component-ready-to-use-spray-gun-quality-finish","title":"SprayMax 2K High Gloss Clearcoat Aerosol — 2-Component Ready-to-Use, Spray-Gun Quality Finish","description":"\u003cp\u003e\u003cstrong\u003eSprayMax USC 2K High Gloss Clearcoat Aerosol is a two-component, ready-to-use spray can that delivers a durable, high‑gloss clear finish with spray‑gun quality results.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for hobbyists, professional refinishers and DIY automotive painters, this aerosol packs a chemical hardener and clearcoat in one activation step so you get a tough, glossy top layer without a separate mixing station. The can is activated, shaken and sprayed — a practical solution when brushless, high‑quality clear protection is needed for automotive basecoats, metalwork, or small parts. It provides enhanced weather and chemical resistance compared with single‑component aerosols and includes a manufacture date on the can for shelf‑life tracking.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this 2K aerosol differ from a standard clear spray?\u003c\/h3\u003e\n\n\u003cp\u003eUnlike single‑component aerosols, SprayMax USC contains a separate hardening component that is released during activation to create a cross‑linked finish. That chemical cure gives the topcoat superior hardness and longer durability under UV and environmental stress. The aerosol format keeps application simple while reproducing the finish characteristics of a conventional spray gun clearcoat.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eTwo‑component chemistry activated inside the can for chemical curing.\u003c\/li\u003e\n  \u003cli\u003eHigh gloss finish that levels and flows like a sprayed clearcoat.\u003c\/li\u003e\n  \u003cli\u003eImproved abrasion, chemical and weather resistance versus 1K sprays.\u003c\/li\u003e\n  \u003cli\u003eManufacture date on can; two‑year recommended shelf life from that date.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surfaces and basecoats can I use this clearcoat over?\u003c\/h3\u003e\n\n\u003cp\u003eThis clearcoat is formulated to be applied over all compatible basecoats, including OEM and aftermarket automotive paints and many primer systems. It is best used on clean, fully cured basecoats and should be applied following surface preparation practices such as degreasing and, where appropriate, light sanding. Avoid applying over uncured or incompatible materials to prevent adhesion problems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for automotive basecoats and refinishes.\u003c\/li\u003e\n  \u003cli\u003eWorks over properly prepared primers and painted surfaces.\u003c\/li\u003e\n  \u003cli\u003eEnsure basecoat is fully cured and clean before spraying.\u003c\/li\u003e\n  \u003cli\u003eTest adhesion on unusual substrates first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply SprayMax USC 2K for best results?\u003c\/h3\u003e\n\n\u003cp\u003eApplication is a three‑step process: activate the can, shake thoroughly, then spray in even passes. Maintain the recommended spray distance and apply several light coats rather than one heavy coat to prevent runs and achieve a smooth, high‑gloss surface. Allow recommended flash times between passes and follow solvent and ventilation safety practices.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eActivate the can according to manufacturer instructions before first use.\u003c\/li\u003e\n  \u003cli\u003eShake for the specified time to mix components completely.\u003c\/li\u003e\n  \u003cli\u003eSpray in overlapping, even passes from the recommended distance.\u003c\/li\u003e\n  \u003cli\u003eUse multiple thin coats and observe flash time between coats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat finish performance can I expect and how should I care for it?\u003c\/h3\u003e\n\n\u003cp\u003eThe cured film delivers a high‑gloss appearance with strong resistance to scratches, abrasion and common automotive chemicals. Over time, gentle polishing can refresh shine, but aggressive compounds should be used cautiously to avoid removing the clear layer. Regular washing and controlled exposure to harsh solvents will help maintain the coat’s longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh‑gloss aesthetic that levels out for smooth appearance.\u003c\/li\u003e\n  \u003cli\u003eMaximum resistance to abrasion and scratching compared to 1K clears.\u003c\/li\u003e\n  \u003cli\u003eGood weather and chemical resistance; avoid prolonged solvent exposure.\u003c\/li\u003e\n  \u003cli\u003ePolish gently if needed; follow vehicle care best practices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: SprayMax USC 2K High Gloss Clearcoat Aerosol is intended for automotive professionals, restoration enthusiasts and advanced DIYers who want the durability and appearance of a spray‑gun clearcoat in an easy, single‑can solution. It’s especially useful for small repairs, panel touch‑ups, trim pieces and projects where a high‑gloss, chemical‑resistant topcoat is required. Note: this product contains chemicals listed by certain jurisdictions; follow all label safety instructions and use proper personal protective equipment, ventilation and disposal methods.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need special equipment to use this 2K aerosol?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No spray gun is required; activate the can, shake, and spray. Use PPE and ventilated conditions for safe application.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the clearcoat effective after activation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Once activated, follow the can’s working time instructions; cured performance is best when applied in recommended coats and allowed to fully cure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SprayMax","offers":[{"title":"Default Title","offer_id":48086227681438,"sku":"B0043B7UQY","price":71.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/spraymax-usc-2k-front-can.jpg?v=1785890691"},{"product_id":"sem-graphite-color-coat-aerosol-12-fl-oz-durable-oem-style-trim-finish","title":"SEM Graphite Color Coat Aerosol 12 fl. oz. — Durable OEM-Style Trim Finish","description":"\u003cp\u003e\u003cstrong\u003eSEM 15303 Graphite Color Coat is a 12 fl. oz. aerosol finish formulated to deliver a durable, neutral graphite color for automotive trim, accessories, and detail touch-ups.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned for quick application and consistent coverage, this color coat from SEM provides a smooth, factory-style graphite appearance for plastic, metal, and trim parts. It comes in a convenient 12 fl. oz. aerosol can that’s easy to use for spot repairs, full-panel resprays, or custom projects. The product includes a 90-day warranty covering material and workmanship and is manufactured in China.\u003c\/p\u003e\n\n\u003ch3\u003eWhat surfaces will the SEM 15303 Graphite Color Coat adhere to?\u003c\/h3\u003e\n\n\u003cp\u003eThis color coat was developed for common automotive surfaces and trim components. Proper surface preparation is essential to achieve long-lasting adhesion and a uniform finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorks on painted metal, plastic trim, and primed panels when surface is clean and scuffed.\u003c\/li\u003e\n  \u003cli\u003eUse compatible primers or adhesion promoters for difficult plastics and flexible parts.\u003c\/li\u003e\n  \u003cli\u003eAvoid bare, oily, or contaminated substrates without proper cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I apply the 12 fl. oz. aerosol for the best finish?\u003c\/h3\u003e\n\n\u003cp\u003eApply in controlled, even passes while maintaining the recommended spray distance to prevent runs and ensure uniform coverage. Multiple light coats produce a smoother, more durable surface than one heavy coat.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eShake can vigorously for at least one minute after mixing balls move freely.\u003c\/li\u003e\n  \u003cli\u003eHold can 8–12 inches from the surface and spray in steady, overlapping passes.\u003c\/li\u003e\n  \u003cli\u003eAllow light flash times between coats; follow label for recommended dry times before handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this graphite finish?\u003c\/h3\u003e\n\n\u003cp\u003eThe SEM color coat is formulated for visual durability suitable for trim and accessory applications when correctly applied and topcoated if required. The product is backed by a 90-day warranty covering material and workmanship.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProvides a consistent graphite tone suited to OEM-style trim matches.\u003c\/li\u003e\n  \u003cli\u003eTopcoat or clear coat can improve chemical and abrasion resistance.\u003c\/li\u003e\n  \u003cli\u003eWarranty covers defects in material and workmanship for 90 days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know about safety, storage, and origin?\u003c\/h3\u003e\n\n\u003cp\u003eUse in a well-ventilated area and follow all label safety instructions for aerosol paints. Store cans upright in a cool, dry place away from heat sources and open flame. This SEM product is manufactured in China and should be handled per local regulations.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWear appropriate respiratory and skin protection while spraying.\u003c\/li\u003e\n  \u003cli\u003eKeep away from sparks, open flames, and hot surfaces while storing or using.\u003c\/li\u003e\n  \u003cli\u003eDispose of empty cans according to local hazardous-waste guidelines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Automotive restorers, collision-repair technicians, detail shops, and DIY enthusiasts who need a compact, ready-to-spray graphite color for trim and small panels will find this 12 fl. oz. SEM color coat useful. It’s especially suited for spot repairs, sample matches, and projects where ease of use and consistent graphite tone are priorities. If you require enhanced chemical or UV resistance, consider pairing this coat with an appropriate clear or protective topcoat.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can SEM 15303 be used on unpainted plastic?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, with proper surface prep and an adhesion promoter or primer for flexible plastics to ensure reliable bonding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before the coated part can be handled?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Light handling is usually possible after the tack-free time on the label; full cure may require longer per product instructions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"SEM","offers":[{"title":"Default Title","offer_id":48086233022622,"sku":"B00397BNJI","price":72.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/sem-15303-graphite-front-view.jpg?v=1785890951"},{"product_id":"kbs-coatings-diamondfinish-clear-satin-aerosol-clear-coat-15-oz-uv-stable-flexible-durable-finish","title":"KBS Coatings DiamondFinish Clear Satin Aerosol Clear Coat, 15 oz — UV‑Stable, Flexible Durable Finish","description":"\u003cp\u003e\u003cstrong\u003eKBS Coatings DiamondFinish Clear Satin is a flexible, UV-stable aerosol clear coat that delivers a durable satin finish and covers about 35 sq ft per 15-ounce can.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for metalworkers, restorers, fabricators and hobbyists, this aerosol variant of DiamondFinish offers a tough protective topcoat that can be sprayed over painted surfaces or directly onto bare steel. The formula resists yellowing, cracking and peeling while remaining permanently flexible, so it stands up to changing temperatures, vibration and chemical exposure. Each 15-ounce can sprays approximately 35 square feet depending on application technique and number of coats.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I use this aerosol clear coat for best results?\u003c\/h3\u003e\n\u003cp\u003eApply to clean, dry surfaces with light, even passes to avoid runs and ensure consistent coverage. Minimal prep is required when spraying over existing paint; however, remove loose rust, contaminants and oil. Multiple thin coats produce a stronger, more uniform film than a single heavy application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eShake can vigorously for 2 minutes before use and intermittently during application.\u003c\/li\u003e\n  \u003cli\u003eHold can 8–12 inches from the surface and spray in sweeping strokes.\u003c\/li\u003e\n  \u003cli\u003eAllow flash time between coats—follow manufacturer drying recommendations for touch and recoat times.\u003c\/li\u003e\n  \u003cli\u003eFor bare steel, de-grease and remove loose oxidation before spraying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hold up outdoors and resist yellowing?\u003c\/h3\u003e\n\u003cp\u003eYes — the DiamondFinish Clear Satin formulation is UV-stable and engineered to resist discoloration over time. That UV stability combined with chemical resistance helps preserve the underlying finish and color on exterior projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e100% UV-stable resin minimizes yellowing from sun exposure.\u003c\/li\u003e\n  \u003cli\u003eHigh chemical resistance helps against common solvents and fuels.\u003c\/li\u003e\n  \u003cli\u003eRemains flexible to tolerate thermal expansion without cracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use it directly on steel or only over paint?\u003c\/h3\u003e\n\u003cp\u003eThis product is formulated to adhere both over other coatings and direct to steel when proper surface prep is performed. It bonds to painted surfaces with minimal prep and can act as a one-step clear topcoat for many metal restoration projects.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable over cured paint with light cleaning and scuffing.\u003c\/li\u003e\n  \u003cli\u003eOn bare metal, clean and remove loose rust for best adhesion.\u003c\/li\u003e\n  \u003cli\u003eProvides corrosion-resistant protective layer when paired with appropriate primers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the satin finish under heavy use?\u003c\/h3\u003e\n\u003cp\u003eDiamondFinish Clear Satin cures to a hard, durable film that stays flexible—this combination reduces cracking and peeling under mechanical stress. It’s formulated for demanding environments where vibration, impacts and chemical exposure occur.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHard, abrasion-resistant surface for long-lasting protection.\u003c\/li\u003e\n  \u003cli\u003eFlexible film prevents brittle failure on substrates that move or flex.\u003c\/li\u003e\n  \u003cli\u003eMaintains satin appearance without chalking in most outdoor conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? KBS Coatings DiamondFinish Clear Satin Aerosol is aimed at DIYers, professional restorers, automotive and motorcycle enthusiasts, metal fabricators and anyone needing a reliable satin protective clear coat that’s easy to spray. Choose this can when you want a compact, portable solution to protect paintwork, metal parts or small assembled pieces with minimal setup and long-term resistance to yellowing and chemical exposure.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much area does one 15 oz can cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: One 15-ounce can covers about 35 square feet, depending on coat thickness and application method.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a primer before using DiamondFinish Clear Satin?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You can spray direct to steel with proper cleaning, but using an appropriate primer improves corrosion protection and adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KBS Coatings","offers":[{"title":"Default Title","offer_id":48086264217758,"sku":"B06XR7LYCG","price":67.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/kbs-coatings-clear-satin-front-can.jpg?v=1785892772"},{"product_id":"kbs-coatings-diamondfinish-high-gloss-clear-spray-16-oz-aerosol-uv-stable-chemical-resistant","title":"KBS Coatings DiamondFinish High Gloss Clear Spray, 16 oz Aerosol — UV-Stable, Chemical-Resistant","description":"\u003cp\u003e\u003cstrong\u003eKBS Coatings DiamondFinish High Gloss Clear Aerosol is a professional-grade, water-clear protective topcoat that sprays directly to metal or over existing finishes to deliver long-lasting gloss, UV stability, and chemical resistance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 16-ounce aerosol from KBS Coatings offers an easy-to-use high-gloss clear coat engineered for workshops, restorations, and do-it-yourself projects. Formulated with a premium acrylic resin system, DiamondFinish sprays smoothly, cures hard yet remains flexible, and resists yellowing and peeling. Each canister covers approximately 35 square feet when applied per instructions, making it economical for small- to medium-sized jobs on steel, aluminum, and painted surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow does DiamondFinish perform when sprayed directly on metal?\u003c\/h3\u003e\n\n\u003cp\u003eDiamondFinish is formulated to adhere to ferrous metals and aluminum without requiring complex priming steps. With minimal surface preparation—cleaning and de-rusting as needed—it bonds well and creates a durable, glossy film that helps protect metal from environmental wear.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAdheres directly to steel and aluminum with minimal prep\u003c\/li\u003e\n  \u003cli\u003eProduces a water-clear, high-gloss finish for metal parts\u003c\/li\u003e\n  \u003cli\u003eResists cracking and peeling under normal use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I spray DiamondFinish over existing paint or coatings?\u003c\/h3\u003e\n\n\u003cp\u003eYes—this clear is designed to go over previously painted or coated surfaces to boost shine and protection. Light scuffing or degreasing is usually sufficient; avoid spraying over poorly bonded or flaking paints to ensure optimal adhesion and longevity.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible with most cured paint systems when surface is sound\u003c\/li\u003e\n  \u003cli\u003eImproves gloss and adds a protective clear layer\u003c\/li\u003e\n  \u003cli\u003eRequires only light prep on well-adhered finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes DiamondFinish resistant to yellowing, UV damage, and chemicals?\u003c\/h3\u003e\n\n\u003cp\u003eDiamondFinish uses a stable acrylic formula and UV-resistant components to help maintain clarity and gloss over time. The cured coating forms a tough, flexible film that withstands environmental exposure and common automotive and workshop chemicals without degrading quickly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e100% UV stable to preserve water-clear appearance\u003c\/li\u003e\n  \u003cli\u003eChemical-resistant surface for workshop durability\u003c\/li\u003e\n  \u003cli\u003eFlexible hard film that resists cracking and yellowing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much area will one 16-ounce can cover and what application tips improve results?\u003c\/h3\u003e\n\n\u003cp\u003eOne 16-ounce aerosol covers roughly 35 square feet under typical spray conditions; coverage varies with film thickness and technique. Apply multiple thin coats instead of one heavy coat, keep the can 8–12 inches from the surface, and allow recommended flash times between passes for a smooth, even finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eApproximate coverage: 35 sq ft per 16-oz can under normal spray conditions\u003c\/li\u003e\n  \u003cli\u003eBest results from several light coats with proper flash time\u003c\/li\u003e\n  \u003cli\u003eMaintain 8–12 inch spray distance and shake can thoroughly before use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? KBS Coatings DiamondFinish High Gloss Clear Aerosol is ideal for mechanics, metal fabricators, restoration enthusiasts, and hobbyists who need a reliable, easy-to-spray clear coat for metal parts, automotive trim, small projects, and touch-ups. If you want a water-clear finish that stays glossy without yellowing and offers chemical and UV resistance in a convenient aerosol can, this product delivers professional-grade protection without requiring a spray gun or complex setup.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is surface primer required before using DiamondFinish on steel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Not always; clean, de-rusted steel may accept DiamondFinish directly, but priming is recommended for porous or heavily corroded surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long before DiamondFinish is fully cured?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Touch-dry in under an hour; full chemical resistance and hardness develop over several days depending on temperature and coat thickness.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KBS Coatings","offers":[{"title":"Default Title","offer_id":48086264250526,"sku":"B06XR7SYF7","price":67.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/kbs-diamondfinish-front-can.jpg?v=1785892774"},{"product_id":"prismatic-powders-clear-vision-powder-coat-1-lb-high-gloss-uv-resistant-polyester-clear-topcoat-for-wheels-and-metal","title":"PRISMATIC POWDERS Clear Vision Powder Coat – 1 lb High-Gloss UV-Resistant Polyester Clear Topcoat for Wheels and Metal","description":"\u003cp\u003e\u003cstrong\u003ePRISMATIC POWDERS Clear Vision Powder Coat is a high-gloss, UV-resistant polyester clear topcoat formulated to give automotive wheels and metal parts a durable, mirror-like finish.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eClear Vision (PPS-2974) is a one-pound canister of premium polyester clear powder designed for automotive and custom metal applications. It delivers deep clarity over base colors while adding chemical, corrosion and UV protection. The formulation flows evenly for smooth coverage and consistent film build, making it well suited for wheels, frames, brackets and other metal components that need both beauty and resilience.\u003c\/p\u003e\n\n\u003ch3\u003eHow does Clear Vision improve the look of painted wheels and parts?\u003c\/h3\u003e\n\u003cp\u003eClear Vision enhances the depth and gloss of any underlying color, producing a reflective, mirror-like topcoat that highlights metallic or solid base coats. The finish reduces surface imperfections and amplifies color contrast for a professional, showroom-quality appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-gloss clarity for mirror-like reflections\u003c\/li\u003e\n  \u003cli\u003eDeepens color and increases visual depth\u003c\/li\u003e\n  \u003cli\u003eMinimizes appearance of minor surface flaws\u003c\/li\u003e\n  \u003cli\u003eCompatible over most polyester and epoxy base coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat protection does this clear powder coat provide?\u003c\/h3\u003e\n\u003cp\u003eThis polyester clear is engineered to resist UV fading, chemical exposure and corrosion, helping painted metal parts maintain their look longer under automotive conditions. It’s formulated to withstand environmental stressors common to wheels and exposed metal components.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUV resistance to reduce yellowing and fading\u003c\/li\u003e\n  \u003cli\u003eChemical and solvent resilience for road film exposure\u003c\/li\u003e\n  \u003cli\u003eCorrosion deterrence on properly prepared metal\u003c\/li\u003e\n  \u003cli\u003eDurable film that resists chipping and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is Clear Vision to apply and cure?\u003c\/h3\u003e\n\u003cp\u003eClear Vision flows smoothly during cure, promoting even film thickness and minimal orange peel when applied correctly. Standard powder coating equipment and curing profiles for polyester clears apply; consistent technique and proper pretreatment will yield the best results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSmooth flow for uniform coverage and reduced overspray\u003c\/li\u003e\n  \u003cli\u003eCompatible with conventional powder coating guns and booths\u003c\/li\u003e\n  \u003cli\u003eFollows typical polyester cure schedules—refer to technical data for exact times\/temperatures\u003c\/li\u003e\n  \u003cli\u003eWorks well over properly prepared and primed substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill Clear Vision work on parts beyond wheels?\u003c\/h3\u003e\n\u003cp\u003eYes — while optimized for automotive wheels, Clear Vision is suitable for any metal component that benefits from a high-gloss protective clear coat. Use it on frames, brackets, trim pieces and custom metalwork where enhanced durability and appearance are desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIdeal for wheels, frames, brackets, and metal trim\u003c\/li\u003e\n  \u003cli\u003eAppropriate for performance and show vehicles\u003c\/li\u003e\n  \u003cli\u003eExcellent for heavy-use parts that need extra protection\u003c\/li\u003e\n  \u003cli\u003eMade in the USA for consistent manufacturing quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PRISMATIC POWDERS Clear Vision is aimed at automotive refinishers, wheel builders, custom fabricators and serious DIYers who want a professional high-gloss clear with strong UV and chemical resistance. If you need a reliable polyester clear that enhances color depth while protecting metal surfaces in daily or show conditions, this one-pound supply offers a convenient dose of premium topcoat performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is Clear Vision compatible with all base coats?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clear Vision works best over polyester and compatible base coats; always test adhesion and consult technical data for multi-layer systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What curing profile should I use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow standard polyester cure schedules—refer to PRISMATIC POWDERS technical sheets for exact time and temperature recommendations.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PRISMATIC POWDERS","offers":[{"title":"Default Title","offer_id":48086305439902,"sku":"B00MI5357U","price":72.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/prismatic-powders-clear-vision-front-canister.jpg?v=1785894592"},{"product_id":"prismatic-powders-gloss-white-powder-coat-1-lb-high-gloss-polyester-automotive-grade-durability","title":"PRISMATIC POWDERS Gloss White Powder Coat 1 lb — High-Gloss Polyester, Automotive-Grade Durability","description":"\u003cp\u003e\u003cstrong\u003ePRISMATIC POWDERS® Gloss White is a high-gloss, solid-tone polyester powder coating formulated to deliver a bright, durable white finish for automotive metal, wheels, and parts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEngineered and manufactured in the USA, this Gloss White (PSS-5690) is a pure, bright white powder coat designed for long-lasting appearance and performance. It’s a high-gloss polyester formula with 85+ gloss units that’s suitable for metal substrates commonly used in automotive applications, including wheels, suspension components, body panels, and decorative trim. The polyester chemistry provides weather and UV resistance for exterior use while offering the adhesion and film integrity needed in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eWhat makes this powder coating a good choice for automotive parts?\u003c\/h3\u003e\n\u003cp\u003eGloss White is formulated to meet the visual and durability expectations of automotive refinishing and aftermarket projects. Its solid-tone polyester composition produces a consistent, opaque white film that resists chalking and color shift better than many lower-grade coatings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid-tone polyester chemistry for uniform coverage and opacity\u003c\/li\u003e\n  \u003cli\u003eHigh-gloss finish (85+ gloss units) for showroom-level shine\u003c\/li\u003e\n  \u003cli\u003eEngineered for exterior exposure and automotive-grade durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is this powder applied and cured?\u003c\/h3\u003e\n\u003cp\u003eApplication follows standard electrostatic powder coating techniques: spray the powder onto a grounded part, then cure in an oven to form a continuous thermoset film. Curing schedules will vary by part thickness and oven equipment, so follow your powder supplier’s recommended ramp and hold temperatures for optimal results.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApplied electrostatically for efficient transfer and minimal waste\u003c\/li\u003e\n  \u003cli\u003eCured in a convection oven to achieve full crosslinking and gloss\u003c\/li\u003e\n  \u003cli\u003eCompatible with common pre-treatments and primers used in metal finishing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat surface results and properties can I expect?\u003c\/h3\u003e\n\u003cp\u003eThe finished coating yields a bright, reflective white surface with smooth leveling and excellent film build. Expect strong adhesion, resistance to household chemicals and mild solvents, plus color stability under normal outdoor exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConsistent bright white color with high hiding power\u003c\/li\u003e\n  \u003cli\u003eSmooth, high-gloss appearance with good leveling\u003c\/li\u003e\n  \u003cli\u003eDurable surface resistant to typical automotive contaminants\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare parts to achieve the best finish?\u003c\/h3\u003e\n\u003cp\u003eProper surface preparation is critical: remove oils, greases, and existing loose coatings, then apply an appropriate metal pretreatment or conversion coating. For ferrous or aluminum substrates, use recommended etch or phosphate processes and ensure parts are fully dried before powder application.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDegrease and clean to remove contaminants\u003c\/li\u003e\n  \u003cli\u003eApply phosphate or conversion coating for enhanced adhesion\u003c\/li\u003e\n  \u003cli\u003eUse compatible primers if extra corrosion protection is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PRISMATIC POWDERS® Gloss White PSS-5690 is intended for professional refinishers, machine shops, custom wheel builders, restoration specialists, and serious DIYers who need a reliable, bright white, high-gloss finish for automotive metal parts and components. It’s ideal when a pure white appearance and long-term performance are priorities, and when conventional powder coating equipment and proper curing ovens are available.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this powder suitable for outdoor automotive parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It’s a polyester solid-tone powder designed for exterior automotive use with good UV and weather resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How much area does 1 lb cover?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Coverage varies by film thickness, but 1 lb typically coats small parts or touch-up areas; refer to your application laydown for estimates.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PRISMATIC POWDERS","offers":[{"title":"Default Title","offer_id":48086306062494,"sku":"B00MI516TO","price":65.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/prismatic-powders-gloss-white-front-can.jpg?v=1785894621"},{"product_id":"3d-aca-510-rubbing-compound-8-oz-fast-cutting-paint-correction-with-alpha-ceramic-alumina-low-dust-silicone-free","title":"3D ACA 510 Rubbing Compound – 8 oz Fast-Cutting Paint Correction with Alpha Ceramic Alumina, Low Dust, Silicone-Free","description":"\u003cstrong\u003e3D ACA 510 Rubbing Compound is a fast-cutting, low-dust paint correction formula that removes P1500 and finer sanding marks while leaving a smooth finish without a follow-up compound.\u003c\/strong\u003e\n\n\u003cp\u003eBuilt for shops and serious detailers, 3D ACA 510 uses Alpha Ceramic Alumina abrasives to cut aggressively yet finish clean, minimizing heat and dust during correction. This silicone-free, body-shop-safe compound works with foam or wool pads on rotary and dual-action polishers, making it a versatile choice when you need to restore clarity and remove defects quickly after sanding or on weathered clear coats.\u003c\/p\u003e\n\n\u003ch3\u003eHow quickly will ACA 510 remove sanding marks and scratches?\u003c\/h3\u003e\n\u003cp\u003eACA 510 is formulated to remove P1500 grit and finer sanding marks in fewer passes than conventional compounds. Its ceramic alumina abrasives slice through surface defects while maintaining a controlled finish, so you often won’t need a second compound step.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for P1500 and finer abrasions\u003c\/li\u003e\n  \u003cli\u003eAggressive cut with refined finish—reduces steps\u003c\/li\u003e\n  \u003cli\u003eWorks on both rotary and DA polishers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this product cause heat build-up or burn clear coat?\u003c\/h3\u003e\n\u003cp\u003eAlpha Ceramic Alumina cuts efficiently while dispersing heat better than many traditional abrasives, helping to limit thermal stress on clear coats. When used with correct speed, pad selection, and light pressure, ACA 510 minimizes the risk of burning and maintains finish integrity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAdvanced abrasive reduces friction and heat\u003c\/li\u003e\n  \u003cli\u003eCompatible with hard clear coats and modern paints\u003c\/li\u003e\n  \u003cli\u003eRecommended: moderate speed, light to medium pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs ACA 510 safe for professional body shops and repaint prep?\u003c\/h3\u003e\n\u003cp\u003eYes—3D engineered ACA 510 to be silicone-free and filler-free, making it safe to use in body shop environments without risking contamination for subsequent painting or coating. Its low-dust formula also helps keep prep areas cleaner and reduces the potential for particulate contamination.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSilicone- and filler-free for paintwork compatibility\u003c\/li\u003e\n  \u003cli\u003eLow dusting for easier cleanup and less contamination\u003c\/li\u003e\n  \u003cli\u003eSuitable for final prep before coatings when cleaned properly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich pads and machines pair best with this compound?\u003c\/h3\u003e\n\u003cp\u003eACA 510 performs well with both foam and wool pads on rotary or dual action polishers, giving you flexibility based on the defect level and operator preference. Wool or aggressive foam pads will maximize cutting power, while finishing pads can refine the gloss if needed after initial correction.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse wool or aggressive foam for heavy correction\u003c\/li\u003e\n  \u003cli\u003eSwitch to softer foam for leveling and finishing passes\u003c\/li\u003e\n  \u003cli\u003eEffective on rotary and DA polishers—adjust technique accordingly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: 3D ACA 510 is aimed at professional detailers, collision repair shops, and experienced DIYers who need a fast, reliable compound that removes heavy sanding marks and defects without creating excessive dust or requiring extra compound steps. If you value cut-first performance with minimal contamination risk and a smooth finish, this 8 oz bottle provides a compact, shop-ready solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can ACA 510 remove P1500 sanding marks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ACA 510 is formulated to eliminate P1500 and finer sanding marks with fewer passes than standard compounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this compound safe for fresh paint and body shops?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. ACA 510 is silicone-free, filler-free, and designed to be compatible with professional body shop workflows.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"3D","offers":[{"title":"Default Title","offer_id":48086315663518,"sku":"B08JQ6NNVF","price":76.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/3d-aca-510-front-label.jpg?v=1785894877"},{"product_id":"prismatic-powders-high-gloss-black-powder-coating-1-lb-solid-tone-polyester-mirror-like-durable-finish","title":"PRISMATIC POWDERS High Gloss Black powder coating 1 lb — Solid Tone Polyester, Mirror-Like Durable Finish","description":"\u003cp\u003e\u003cstrong\u003ePRISMATIC POWDERS High Gloss Black (PSS-11248) is a 1 lb solid tone polyester powder coating that delivers a mirror-like, durable black finish for automotive metal, wheels and parts.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis single-pound, Made in USA powder coating is formulated to produce an exceptionally deep, true-black appearance with superior flow-out and high gloss. It is designed for industrial and automotive use where a premium visual result and long-lasting surface performance are needed. The formula balances ease of application with resistance to common wear factors expected on wheels, components and metal accessories.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this powder achieve its high-gloss, mirror-like finish?\u003c\/h3\u003e\n\u003cp\u003eThe High Gloss Black uses a refined polyester resin and specialized pigments that promote exceptional leveling during cure. That combination minimizes surface texture and produces a deep, uniform black with strong light reflection. Proper application and oven cure are important to reach peak gloss and flow-out.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid tone polyester formulation for consistent color\u003c\/li\u003e\n  \u003cli\u003eOptimized particle size and additives for superior flow\u003c\/li\u003e\n  \u003cli\u003eEngineered pigments to enhance depth and visual clarity\u003c\/li\u003e\n  \u003cli\u003eRequires recommended bake cycle for full gloss development\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat kind of durability can I expect for automotive use?\u003c\/h3\u003e\n\u003cp\u003eThis coating is formulated for high-performance environments and resists common mechanical and environmental stresses when applied correctly. It offers excellent adhesion and a hard surface that withstands handling, wheel mounting, and exterior exposure typical of automotive parts. While robust, longevity depends on surface prep, cure, and service conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh hardness and abrasion resistance after full cure\u003c\/li\u003e\n  \u003cli\u003eGood adhesion to prepared metal substrates\u003c\/li\u003e\n  \u003cli\u003eResists chipping and marring under normal use\u003c\/li\u003e\n  \u003cli\u003ePerformance optimized for wheels, brackets, and metal components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and apply this powder for best results?\u003c\/h3\u003e\n\u003cp\u003eSurface preparation is critical: clean, degrease, and remove rust or mill scale before application. Apply with a compatible electrostatic spray system and follow PRISMATIC POWDERS’ recommended spray and cure parameters to achieve even coverage and maximum gloss. Avoid over-baking or under-curing to prevent loss of finish quality.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThoroughly clean and abrasive-blast or chemically treat metal\u003c\/li\u003e\n  \u003cli\u003eUse electrostatic spray for uniform film build\u003c\/li\u003e\n  \u003cli\u003eFollow manufacturer cure schedule for temperature and time\u003c\/li\u003e\n  \u003cli\u003eControl film thickness to avoid orange peel or runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this 1 lb size cover small projects or touch-ups?\u003c\/h3\u003e\n\u003cp\u003eThe 1 lb package is ideal for touch-ups, sample panels, or small components rather than large-scale jobs. It provides enough material for repairing chips, coating a few small wheels, or producing test batches. For larger runs, consider purchasing larger quantities to ensure color and batch consistency.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePerfect for test panels, small parts, and repairs\u003c\/li\u003e\n  \u003cli\u003e1 lb is suitable for limited production or spot fixes\u003c\/li\u003e\n  \u003cli\u003ePurchase consistent lot numbers for large projects to match shade\u003c\/li\u003e\n  \u003cli\u003eStore in a cool, dry place to maintain product stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: PRISMATIC POWDERS High Gloss Black (PSS-11248) is aimed at automotive enthusiasts, wheel and parts shops, fabricators and professional powder coaters who require a deep, true black high-gloss finish with reliable durability. If you need a premium-looking coating for metal components, small production runs, touch-ups or show-quality restoration projects, this 1 lb solid tone polyester powder offers a concentrated option from a reputable U.S. manufacturer. For best results, pair with proper surface prep, electrostatic application equipment and the manufacturer-recommended cure profile.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What temperature and time should I cure this powder?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Follow PRISMATIC POWDERS’ technical datasheet; typical polyester cures are 15–20 minutes at specified temperature for full gloss.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this on aluminum and steel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it works on properly prepped aluminum and steel, but adhesion and prep methods differ by substrate.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PRISMATIC POWDERS","offers":[{"title":"Default Title","offer_id":48086549659806,"sku":"B0CWVWKS22","price":70.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/prismatic-powders-high-gloss-black-front-packaging.jpg?v=1785900525"},{"product_id":"kehe-refinish-dry-guide-coat-powder-7-5-oz-212-g-black-ultra-fine-2000-grit-for-accurate-sanding-instant-sand-solvent-free","title":"KEHE REFINISH Dry Guide Coat Powder 7.5 oz (212 g) Black — Ultra-Fine 2000-Grit for Accurate Sanding, Instant-Sand Solvent-Free","description":"\u003cp\u003e\u003cstrong\u003eKEHE REFINISH Black Dry Guide Coat is an ultra-fine 2000-grit powder designed to reveal sanding scratches, pinholes and low spots quickly so you can finish auto body repairs faster and more accurately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis dry guide coat comes in a 7.5 oz (212 g) moisture-resistant container and sprays a thin, even layer over primers and filler to highlight imperfections before final paint. Unlike solvent-based sprays, the powder is ready for immediate sanding after application, removing wait times and masking steps. The ergonomic foam applicator helps you cover large panels comfortably while the ultra-fine particle size improves detection compared with coarser 200–1200 grit powders.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 2000-grit powder make sanding checks more accurate?\u003c\/h3\u003e\n\n\u003cp\u003eThe ultra-fine particle size lays down a thin, consistent film that reveals hairline scratches, pinholes and subtle low spots without filling them in. Because the powder doesn’t clog pores or dust intake holes, you get a clearer visual contrast against primer and filler surfaces.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e2000-grit formulation exposes minute imperfections other powders can mask\u003c\/li\u003e\n  \u003cli\u003eLeaves a dust-like coating that contrasts against primer for easy spotting\u003c\/li\u003e\n  \u003cli\u003eWon’t plug sanding dust collection, improving inspection quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I sand immediately after applying this dry guide coat?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this is a solvent-free dry coating formulated for immediate sanding. There’s no drying time and no need to mask surrounding areas, which streamlines workflow on busy repair bays and DIY projects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSolvent-free composition permits instant sanding\u003c\/li\u003e\n  \u003cli\u003eEliminates masking and wait times for faster turnaround\u003c\/li\u003e\n  \u003cli\u003eWorks with both wet and dry sanding methods\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the applicator easier to use on large panels?\u003c\/h3\u003e\n\n\u003cp\u003eThe product includes an ergonomic foam handle shaped with a polygonal profile to improve grip and distribute pressure evenly. That design reduces hand fatigue during repetitive passes and helps apply a consistent coat across hoods, doors, and full panels.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePolygonal foam handle improves hold and control\u003c\/li\u003e\n  \u003cli\u003eEasier force application for uniform coverage on large areas\u003c\/li\u003e\n  \u003cli\u003eReduces wrist and hand strain during extended use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow long does one 7.5 oz container last and where does it perform best?\u003c\/h3\u003e\n\n\u003cp\u003eThe 212 g supply offers extended use for multiple panel checks thanks to a higher net weight and moisture-proof packaging that preserves powder performance. It’s ideal for collision repair shops, paint prep professionals, and serious DIYers who need reliable, repeatable inspection results.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e7.5 oz volume suits frequent shop use or several DIY projects\u003c\/li\u003e\n  \u003cli\u003eMoisture-resistant packaging extends shelf life and reliability\u003c\/li\u003e\n  \u003cli\u003eCompatible with primer, filler and most substrate surfaces for inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: KEHE REFINISH 7.5 oz Black Dry Guide Coat is made for body shop technicians, paint prep specialists, and hands-on vehicle owners who demand precise defect detection while minimizing step time. If you want faster inspection, immediate sanding capability, and an ergonomic applicator for large panels, this ultra-fine guide coat helps streamline finishing and improve final paint quality without extra drying or masking steps.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this guide coat safe to sand immediately after use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The solvent-free dry powder requires no drying or masking and is formulated for immediate wet or dry sanding.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will the 2000-grit powder clog dust collection or sanding pads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The ultra-fine particles are designed not to clog dust intake holes or pads, preserving sanding efficiency.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"KEHE REFINISH","offers":[{"title":"Default Title","offer_id":48086552445086,"sku":"B0G1GMQ6GF","price":68.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/kehe-refinish-front-packaging_d5aaaede-1e30-41d0-8089-6ff87164adc4.jpg?v=1785900579"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/collections\/spraymax-2k-glamour-front-can.jpg?v=1794396261","url":"https:\/\/northtrailauto.ca\/collections\/automotive-clear-coat.oembed","provider":"North Trail Auto","version":"1.0","type":"link"}