{"product_id":"10an-female-to-5-16-barb-90-degree-hose-fitting-adapter","title":"10AN Female to 5\/16 Barb 90 Degree Hose Fitting Adapter","description":"\u003cp\u003e\u003cstrong\u003ecaqeg's AN10 female to 5\/16\" barb 90° swivel adapter is a lightweight, corrosion-resistant aluminum fitting that converts an AN10 (7\/8-14 UNF) female port to a 5\/16\" hose barb at a right angle for fuel, oil, and coolant lines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis swivel adapter pairs AN-style threaded plumbing with standard 5\/16\" flexible hose, giving you a compact 90° routing option that reduces stress on lines and creates a cleaner, more accessible installation in tight engine bays or machine compartments. Manufactured from 6061-T6 billet aluminum and anodized for extra wear and corrosion resistance, this two-pack is built for repeated use with gasoline and alcohol-based fuels as well as oil and water applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this adapter simplify tight routing in engine bays?\u003c\/h3\u003e\n\u003cp\u003eThe 90° elbow shape re-directs hose runs without sharp kinks, letting you route hoses around obstruction points and back along chassis lines. The female AN10 inlet accepts standard AN male fittings while the 5\/16\" barb secures flexible hose with a clamp.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact 90° profile reduces required clearance behind fittings\u003c\/li\u003e\n  \u003cli\u003eSwivel body eases alignment during installation\u003c\/li\u003e\n  \u003cli\u003eBarb accepts common 5\/16\" fuel\/hose diameters with clamp retention\u003c\/li\u003e\n  \u003cli\u003eAnodized surface protects threads and external surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and protections does it use for durability?\u003c\/h3\u003e\n\u003cp\u003eThese adapters are machined from 6061-T6 billet aluminum, a balance of light weight and mechanical strength commonly used in automotive fittings. An anodized finish adds corrosion resistance and surface hardness to withstand vibration and exposure to fuels and fluids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6061-T6 billet aluminum construction for strength and low weight\u003c\/li\u003e\n  \u003cli\u003eAnodized surface resists corrosion and abrasion\u003c\/li\u003e\n  \u003cli\u003eCompatible with gasoline and alcohol-based fuels, oil, and water\u003c\/li\u003e\n  \u003cli\u003ePrecision threads to maintain leak-free connections when used with proper sealants or blankets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fitting work with my existing AN hardware and hoses?\u003c\/h3\u003e\n\u003cp\u003eThe adapter accepts AN10 (7\/8-14 UNF) male threads on the female end and terminates into a 5\/16\" (7.9 mm) hose barb. It is intended for use where an AN-style port must be converted to a flexible hose connection, not as a permanent pressurized flare replacement.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFemale AN10 (7\/8-14 UNF) inlet for standard AN male fittings\u003c\/li\u003e\n  \u003cli\u003e5\/16\" barb outlet fits common fuel and vacuum hoses\u003c\/li\u003e\n  \u003cli\u003eBest used with hose clamps or crimp-style fittings for secure hose retention\u003c\/li\u003e\n  \u003cli\u003eNot a direct replacement for brazed or welded metal hardlines under extreme pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these swivel adapters?\u003c\/h3\u003e\n\u003cp\u003eThread the AN end into a compatible male fitting using proper thread sealant or PTFE tape rated for fuel systems if required, then push hose fully onto the barb and secure with a clamp. Periodically inspect clamps and the anodized finish for signs of wear or leakage.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse thread sealant compatible with fuel systems when needed\u003c\/li\u003e\n  \u003cli\u003eEnsure hose is seated fully over the barb and clamp is tightened correctly\u003c\/li\u003e\n  \u003cli\u003eCheck regularly for leaks, especially after initial run-in\u003c\/li\u003e\n  \u003cli\u003eReplace if anodizing is worn through or if threads are damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This two-pack of caqeg AN10 female to 5\/16\" barb 90° swivel adapters is ideal for motorsport builders, custom fabricators, and hobbyists who need a compact, serviceable way to convert AN10 ports to flexible hose lines. It suits applications in automotive fuel systems, oil feed\/return lines, coolant bypasses, and anywhere a durable right-angle hose transition is required. If you need a lightweight, corrosion-resistant adapter that stays compatible with gasoline and alcohol-based fuels and simplifies hose routing in confined spaces, this product is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this adapter compatible with ethanol-blended fuels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the anodized 6061-T6 aluminum construction is compatible with gasoline and alcohol-based fuels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this as a permanent replacement for hardline fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, it's designed to convert AN10 ports to hose connections; use appropriate hardlines for high-pressure permanent systems.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"caqeg","offers":[{"title":"Default Title","offer_id":48086865641630,"sku":"B0FBRRBXG8","price":34.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/caqeg-an10-female-front.jpg?v=1785908587","url":"https:\/\/northtrailauto.ca\/products\/10an-female-to-5-16-barb-90-degree-hose-fitting-adapter","provider":"North Trail Auto","version":"1.0","type":"link"}