{"product_id":"ac-performance-3-4-id-nbr-push-on-fuel-hose-2-ft-black-non-conductive-e85-safe","title":"AC PERFORMANCE 3\/4\" ID NBR Push-On Fuel Hose 2 ft Black — Non-Conductive, E85-Safe","description":"\u003cp\u003e\u003cstrong\u003eAC PERFORMANCE 3\/4\" ID NBR push-on fuel hose is a 2-foot, non-conductive nitrile rubber line built for gasoline, ethanol blends (including E85), oils and coolant where push-on AN fittings are used.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose is engineered as a textile-reinforced, elastomer-covered nitrile (NBR) inner liner suited to automotive and small-engine fuel and fluid systems. It is made to accept 400 and 510-series push-on AN hose ends and performs across a wide temperature span, providing a reliable path for fuels and lubricants when installed with appropriate fittings and clamps.\u003c\/p\u003e\n\n\u003ch3\u003eWhat materials and dimensions define this hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose uses high-grade nitrile rubber (NBR) for chemical resistance to petroleum products and ethanol blends, with a textile reinforcement layer and elastomer outer cover for abrasion resistance. Inner diameter, outer diameter and length are specified so you can match it to your fittings and routing needs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 3\/4\" (19.1 mm)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 1-1\/32\" (26.2 mm)\u003c\/li\u003e\n  \u003cli\u003eLength: 2 feet (approximately 0.61 m)\u003c\/li\u003e\n  \u003cli\u003eMaterial: Nitrile rubber (NBR) with textile reinforcement and elastomer cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and fittings can I use with this hose?\u003c\/h3\u003e\n\u003cp\u003eThis line is designed for fuel system use including gasoline, E10 and E85, plus oils, lubricants and coolant. It is compatible with push-on AN fittings specifically in the 400 and 510 series; make sure the hose end and hose ID match for a secure push-on connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible fluids: gasoline, E10, E85, oils, lubricants, coolant\u003c\/li\u003e\n  \u003cli\u003eFitting compatibility: 400 \u0026amp; 510 series push-on AN hose ends\u003c\/li\u003e\n  \u003cli\u003eNon-conductive construction — not for electrical grounding purposes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does it perform under temperature and pressure?\u003c\/h3\u003e\n\u003cp\u003eThe hose is rated to operate in a broad temperature window and withstands typical pressures found in many fuel and coolant circuits. For higher-temperature runs above 70°C, use a clamp at the fitting interface to preserve a leak-free connection over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating temperature: -40°C to 100°C\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: 280 PSI\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 800 PSI\u003c\/li\u003e\n  \u003cli\u003eRecommendation: add clamp when exposed to temperatures above 70°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I prepare and install this hose for reliable service?\u003c\/h3\u003e\n\u003cp\u003eCleanliness and proper assembly are crucial: always purge and inspect new hose before introducing fuel or fluids to remove manufacturing debris. Push-on installation is quick, but double-check seating and consider clamps in high-heat or high-vibration applications to prevent pull-off and leaks.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThoroughly clean the hose interior before first use\u003c\/li\u003e\n  \u003cli\u003eConfirm hose ID matches push-on fitting series (400 or 510)\u003c\/li\u003e\n  \u003cli\u003eUse clamps for runs where temperature exceeds 70°C or in high-vibration areas\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for swelling, cracking, or hardening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this hose for? This AC PERFORMANCE 3\/4\" ID NBR push-on hose suits mechanics, motorsport fabricators, DIY tuners and small-engine technicians who need a short length of ethanol-capable, oil-resistant fuel line that accepts common push-on AN fittings. It’s ideal when you require a non-conductive, textile-reinforced line for fuel, lubricant or coolant routing in vehicles, portable equipment and custom plumbing where a 2-foot run and 3\/4\" ID are the right fit. Always follow system pressure limits and installation best practices to ensure safe, durable performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle E85 ethanol fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The NBR construction is formulated to resist ethanol blends including E85 when used within temperature and pressure limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need clamps with push-on fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Clamps are recommended when operating temperatures exceed 70°C or in high-vibration applications to prevent pull-off.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AC PERFORMANCE","offers":[{"title":"Default Title","offer_id":48084319010974,"sku":"B07S81C5XS","price":30.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/ac-performance-front-view-push-on-hose.jpg?v=1785849677","url":"https:\/\/northtrailauto.ca\/products\/ac-performance-3-4-id-nbr-push-on-fuel-hose-2-ft-black-non-conductive-e85-safe","provider":"North Trail Auto","version":"1.0","type":"link"}