{"product_id":"alixueqin-2-5-ton-scissor-jack-kit-for-tesla-model-y-3-s-x-tesla-specific-pads-alloy-steel-lift-4-3-15-3-in","title":"ALIXUEQIN 2.5 Ton Scissor Jack Kit for Tesla Model Y\/3\/S\/X — Tesla-specific pads, alloy steel lift 4.3–15.3 in","description":"\u003cp\u003e\u003cstrong\u003eALIXUEQIN's 2.5-ton scissor jack kit safely lifts most Tesla models for tire changes and underbody access without modifying the car.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact, vehicle-specific lifting kit was designed to work with Tesla’s factory lift points and protect battery housings while you change a flat or perform roadside checks. Built from high-strength alloy steel, the scissor jack provides a broad lifting range and includes Tesla-compatible non-slip pads plus the hand tools you need to remove and replace a wheel quickly. The kit balances stable load capacity with portable convenience so it fits in trunks and emergency tool compartments.\u003c\/p\u003e\n\n\u003ch3\u003eHow much weight can this jack support and what is its lifting range?\u003c\/h3\u003e\n\u003cp\u003eThe ALIXUEQIN scissor jack is rated for a 2.5-ton (approximately 5,512 lb) maximum load and raises the vehicle from roughly 4.3 inches up to 15.3 inches. Its robust construction and gearing give steady lift performance under normal roadside conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum rated capacity: 2.5 tons \/ ~5,512 pounds\u003c\/li\u003e\n  \u003cli\u003eLowest height: about 4.3 inches for compact clearance\u003c\/li\u003e\n  \u003cli\u003eMaximum height: about 15.3 inches for full wheel removal\u003c\/li\u003e\n  \u003cli\u003eAlloy steel frame for improved strength and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my Tesla and protect the battery housing?\u003c\/h3\u003e\n\u003cp\u003eThe set includes two rubber jack pads shaped to align with Tesla’s 25 mm factory lift holes so you can lift at the designated points without adapting the vehicle. These pads provide a non-slip contact surface that prevents metal-to-body contact and reduces risk of scratching.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Model Y, 3, S, and X (not compatible with Model 3 Performance)\u003c\/li\u003e\n  \u003cli\u003eTwo non-slip rubber pads match Tesla 25 mm lift points\u003c\/li\u003e\n  \u003cli\u003ePads cushion and reduce abrasion on the chassis during lift\u003c\/li\u003e\n  \u003cli\u003eNo permanent modifications required for correct fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat tools come with the kit and how easy is it to use on the roadside?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives with the scissor jack plus an extended ratchet, an L-shaped wrench, a 21 mm socket, a lug wrench sleeve, and protective gloves — everything needed for a one-person tire change. The extended ratchet simplifies turning force so you can raise and lower the car with controlled motion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: scissor jack, 2 jack pads, ratchet, lug wrench sleeve, 21 mm socket, L-wrench, gloves\u003c\/li\u003e\n  \u003cli\u003eExtended ratchet enables single-hand operation for lift control\u003c\/li\u003e\n  \u003cli\u003eL-wrench and socket speed wheel nut removal and replacement\u003c\/li\u003e\n  \u003cli\u003eCompact kit design stores easily in trunk storage areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the jack address safety while lifting an electric vehicle?\u003c\/h3\u003e\n\u003cp\u003eThe jack is built to engage Tesla’s designated lift points precisely and includes protective pads to avoid direct steel-to-vehicle contact. Stable base geometry and a high-strength screw mechanism minimize wobble when properly positioned on level ground.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrecise engagement with factory lift holes for correct placement\u003c\/li\u003e\n  \u003cli\u003eNon-slip rubber pads protect sheet metal and reduce slippage\u003c\/li\u003e\n  \u003cli\u003eWide base and alloy steel construction increase stability under load\u003c\/li\u003e\n  \u003cli\u003eUse only on firm, level surfaces and follow vehicle safety steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Drivers of Tesla Model Y, Model 3 (non-Performance), Model S, and Model X who want a compact, vehicle-specific jack and tire-change tool set for roadside emergencies or home use. It suits owners who prefer a purpose-built solution that aligns with Tesla lift points, offers strong load capacity, and includes the hand tools required to swap a wheel safely and efficiently.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this jack compatible with all Tesla models?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits Model Y, Model 3 (non-Performance), Model S, and Model X; not compatible with Model 3 Performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can one person operate the jack safely?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the extended ratchet enables single-person lifting, but always follow vehicle safety steps and use on level ground.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"ALIXUEQIN","offers":[{"title":"Default Title","offer_id":48081129242782,"sku":"B0D3C3ZLK9","price":72.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/alixueqin-front-view-packaged-kit.jpg?v=1785797026","url":"https:\/\/northtrailauto.ca\/products\/alixueqin-2-5-ton-scissor-jack-kit-for-tesla-model-y-3-s-x-tesla-specific-pads-alloy-steel-lift-4-3-15-3-in","provider":"North Trail Auto","version":"1.0","type":"link"}