{"product_id":"autovic-corvette-brake-hose-hard-line-kit-1965-1982-4-wheel-disc-oem-fit","title":"AUTOVIC Corvette Brake Hose \u0026 Hard-Line Kit 1965-1982, 4-Wheel Disc OEM Fit","description":"\u003cp\u003e\u003cstrong\u003eA complete AUTOVIC brake hose and hard-line kit engineered to restore reliable brake fluid routing and pressure for 1965–1982 Chevrolet Corvettes with four-wheel disc brakes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your classic Corvette shows soft pedal, leaking fittings, or aging rubber lines, replacing the hoses and lines can bring back consistent braking feel and reduce the risk of fluid loss. This AUTOVIC kit includes front and rear flexible hoses plus the required metal lines and mounting hardware, built to match original routing and fitment across C2 and C3 model years listed for the Corvette.\u003c\/p\u003e\n\n\u003ch3\u003eWhat model years and engines does this kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis set is made for Chevrolet Corvettes from 1965 through 1982 that use four-wheel disc brakes. It covers both C2 (1965–1967) and C3 (1968–1982) generations; verify your car's engine displacement (CID\/L) to confirm exact compatibility with certain model-year variants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 1965–1967 Corvette C2: 327CID and 396CID engines where applicable.\u003c\/li\u003e\n  \u003cli\u003eFits 1968–1982 Corvette C3 models across multiple V8 displacements (327\/350\/427\/454 etc.).\u003c\/li\u003e\n  \u003cli\u003eDesigned to match factory routing for base, Stingray, convertible and special editions across the listed years.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the AUTOVIC kit improve braking performance?\u003c\/h3\u003e\n\u003cp\u003eWorn or swollen rubber hoses and corroded hard lines can cause delayed pedal response or leaks. This kit replaces old components with new, higher-grade materials to restore proper fluid flow and pressure consistency without altering original system geometry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNew high-grade rubber hoses maintain flexibility under pressure.\u003c\/li\u003e\n  \u003cli\u003eIncluded metal lines replace corroded originals to stop leaks and maintain routing.\u003c\/li\u003e\n  \u003cli\u003eClips and washers are supplied for secure mounting and leak-free connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and what tools are needed for installation?\u003c\/h3\u003e\n\u003cp\u003eThe package contains two front hoses, two rear hoses, two hard lines, four clips and four washers — everything needed to replace the most commonly failing brake line components. Basic mechanical skills and standard brake-line tools are required; always follow a proper bleeding procedure after installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eKit contents: 2 front hoses, 2 rear hoses, 2 lines, 4 clips, 4 washers.\u003c\/li\u003e\n  \u003cli\u003eRecommended tools: flare-wrench set, line wrenches, brake-bleeding kit, jack and stands.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation recommended if you are not experienced with brake systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these parts match the original fit and routing?\u003c\/h3\u003e\n\u003cp\u003eAUTOVIC designed this kit to replicate OEM fit and routing appropriate for the listed model years so it installs using the existing mounting points. That means minimal modification and proper alignment with factory brake components for leak-free connections and correct hose lengths.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHose lengths and end fittings match factory locations for easy replacement.\u003c\/li\u003e\n  \u003cli\u003eMounting clips and seals are included to secure lines exactly where needed.\u003c\/li\u003e\n  \u003cli\u003eNo permanent alterations to chassis or brake components expected when matched to correct year\/engine variant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This AUTOVIC kit is intended for owners, restorers and mechanics working on 1965–1982 Chevrolet Corvettes with four-wheel disc brakes who want a practical replacement for aged hoses and corroded hard lines. If your car is exhibiting brake softness, visible hose wear, or you’re completing a restoration, this set provides the core components to renew brake fluid delivery and mounting hardware. Always confirm your Corvette’s model year and engine size before ordering and have the brakes bled by a qualified technician after installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit include both front and rear brake hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains two front hoses and two rear hoses plus two hard lines, four clips and four washers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install these myself on my 1973 Corvette?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If you have brake-line tools and experience bleeding brakes, you can; otherwise use a qualified mechanic for safety.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOVIC","offers":[{"title":"Default Title","offer_id":48081387683998,"sku":"B0FCXZ3SW2","price":109.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/autovic-front-hoses-packaging.jpg?v=1785802404","url":"https:\/\/northtrailauto.ca\/products\/autovic-corvette-brake-hose-hard-line-kit-1965-1982-4-wheel-disc-oem-fit","provider":"North Trail Auto","version":"1.0","type":"link"}