{"product_id":"autoxbert-mercedes-benz-rubber-jack-pad-set-4-piece-68mm-x-42mm-protective-jacking-point-adapters","title":"AUTOXBERT Mercedes-Benz Rubber Jack Pad Set — 4‑Piece 68mm x 42mm Protective Jacking Point Adapters","description":"\u003cb\u003eAUTOXBERT rubber jack pads are molded rubber adapters that protect Mercedes-Benz factory jack points and rocker panels while lifting the car.\u003c\/b\u003e\n\nThese compact, resilient pads create a safe interface between a floor jack or lift and a Mercedes-Benz jacking point to prevent paint, pinch-weld and frame rail damage. Sold as a set of four, each pad fits the common factory lift locations used across many A, B, C, E, S, CLA, GLA\/GLC\/GLE and other Mercedes model families. Their 68mm diameter and 42mm height profile give a secure seating surface for emergency roadside lifting, tire shops and home garages.\n\n\u003ch3\u003eWhich Mercedes models will these jack pads work with?\u003c\/h3\u003e\n\u003cp\u003eThe AUTOXBERT pads are designed to match the factory jacking points on a wide range of Mercedes-Benz platforms. They fit many A-Class, B-Class, C-Class, E-Class, S-Class, GL\/GLA\/GLE\/GLC, M-Class, R-Class, CLA\/CLC\/CLK\/CLS and related variants—check compatibility against your chassis code before buying.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible chassis examples: W168, W169, W176, W246, W203, W204, W210, W211, W212, C117, X117, X156, X166 and more.\u003c\/li\u003e\n  \u003cli\u003eIntended for factory-designed jack points and pinch-weld lift areas.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for use with lever-type jack tools.\u003c\/li\u003e\n  \u003cli\u003eSold as a 4-piece set to cover the vehicle's four lift positions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these pads protect my car during lifting?\u003c\/h3\u003e\n\u003cp\u003eThe pads create a cushioned, high-friction contact area that prevents metal-on-metal contact and spreads lifting loads across the jack point. That reduces the chance of denting rocker panels, cracking paint, or bending pinch weld seams when raising the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMolded solid rubber resists tears and abrasions under load.\u003c\/li\u003e\n  \u003cli\u003eRubber surface increases grip between jack cup and chassis point.\u003c\/li\u003e\n  \u003cli\u003eProtects painted surfaces and frame rails from pinching or deformation.\u003c\/li\u003e\n  \u003cli\u003e68mm diameter provides a stable seating footprint for most factory pads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these work for low-ride vehicles or roadside emergencies?\u003c\/h3\u003e\n\u003cp\u003eYes — they are helpful when ground clearance is limited and you must use the designated jacking locations. The pads give a slightly raised, stable contact surface so a floor jack or shop lift can engage the factory point more reliably during emergency or routine lifting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e42mm height helps bridge small clearance gaps on lowered cars.\u003c\/li\u003e\n  \u003cli\u003eCompact profile fits tight pinch-weld and lift-saddle areas.\u003c\/li\u003e\n  \u003cli\u003eDurable rubber tolerates repeated use in shop or roadside scenarios.\u003c\/li\u003e\n  \u003cli\u003eKeep a set in the trunk for tire changes or emergency lifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and care for these jack pads?\u003c\/h3\u003e\n\u003cp\u003ePlace a pad into the jack cup or onto the lift saddle before lowering onto the factory jack point. Clean debris from the vehicle jack point and the pad before each use, and inspect for damage; replace any pad that shows cracking or severe wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWipe pads with mild soap and water; avoid petroleum solvents.\u003c\/li\u003e\n  \u003cli\u003eStore away from prolonged UV or heat exposure to prolong life.\u003c\/li\u003e\n  \u003cli\u003eDo not use with lever jacks; follow vehicle and jack manufacturer safety steps.\u003c\/li\u003e\n  \u003cli\u003eAlways use jack stands after lifting—do not rely on the jack alone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\nWho is this for?\n\nThis set is aimed at Mercedes-Benz owners, DIY enthusiasts, independent mechanics and tire shops that want a low-cost way to protect vulnerable jack points and painted pinch-welds. If you regularly lift Mercedes platforms listed in the fitment, or you value preserving the underside and rocker panel finish while changing tires or performing maintenance, these AUTOXBERT rubber jack pads are a practical accessory to include in your toolkit.\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these jack pads compatible with my Mercedes model?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They fit many Mercedes chassis (A, B, C, E, S, GLA\/GLC\/GLE, M, R and related). Check your chassis code against the fitment list before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these with any jack or lift?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use with standard floor jacks and shop lifts at factory jack points; not recommended for lever jacks or unsupported lifting methods.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUTOXBERT","offers":[{"title":"Default Title","offer_id":48085575762078,"sku":"B09B6SPNMH","price":34.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/autoxbert-front-packaging-view.jpg?v=1785873742","url":"https:\/\/northtrailauto.ca\/products\/autoxbert-mercedes-benz-rubber-jack-pad-set-4-piece-68mm-x-42mm-protective-jacking-point-adapters","provider":"North Trail Auto","version":"1.0","type":"link"}