{"product_id":"auxbeam-f18-series-led-fog-lights-h11-h8-h9-22-000lm-plug-and-play-ip68-durable","title":"Auxbeam F18 Series LED Fog Lights H11\/H8\/H9 22,000LM — Plug-and-Play, IP68 Durable","description":"\u003cp\u003e\u003cstrong\u003eAuxbeam F18 Series H11\/H8\/H9 fog lights deliver a compact, high-output LED solution that adds up to 22,000 lumens per set for clearer low-beam and fog illumination without bulky external drivers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Auxbeam F18 Series is a purpose-built fog and offroad lighting kit engineered to replace H11, H8 and H9 halogen bulbs with a high-efficiency LED design. Built-in decoding electronics, a layered cooling system and an adjustable beam collar let you upgrade lighting performance while keeping wiring simple and maintaining compatibility with most modern vehicles. Lightweight and IP68 rated, it’s designed for road, trail, and everyday driving where better low-angle lighting is needed.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright are these fog lights compared with stock bulbs?\u003c\/h3\u003e\n\u003cp\u003eThe F18 Series uses 24 Blade‑X LEDs and a tuned optics layout to produce up to 22,000 lumens per set, a major jump over typical halogen fog bulbs. That extra output improves scene visibility at low angles without creating hot spots or scattered glare.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRated output: 22,000 lumens per set\u003c\/li\u003e\n  \u003cli\u003eBlade‑X chips for even light distribution\u003c\/li\u003e\n  \u003cli\u003eSharp cut‑off to avoid blinding oncoming traffic\u003c\/li\u003e\n  \u003cli\u003e0.1s instant startup for immediate illumination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the lights fit my H11\/H8\/H9 fog housings and vehicle electronics?\u003c\/h3\u003e\n\u003cp\u003eAuxbeam designed the F18 with a 1:1 filament position and compact all‑in‑one metal housing so it fits most H11, H8 and H9 sockets without relocating lamps. Built‑in intelligent decoding chips address CAN bus and PWM systems for 99% vehicle compatibility, minimizing error codes and flicker.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePlug‑and‑play form factor with no external drivers\u003c\/li\u003e\n  \u003cli\u003eBuilt‑in decoders for widespread system compatibility\u003c\/li\u003e\n  \u003cli\u003e360° adjustable collar for beam alignment in tight housings\u003c\/li\u003e\n  \u003cli\u003eContact Auxbeam support for rare sensitive models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the F18 manage heat and longevity?\u003c\/h3\u003e\n\u003cp\u003eHeat control is handled by a six‑layer cooling system combining a liquid‑cooled copper tube, high‑speed silent fan, copper baseboard and large heat sinks in an all‑aluminum shell. That engineered thermal path reduces operating temperature and helps the LEDs maintain brightness for more than 50,000 hours of service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e15,000 RPM silent fan plus liquid‑cooling copper tube\u003c\/li\u003e\n  \u003cli\u003ePure copper baseboard and large culvert heat sinks\u003c\/li\u003e\n  \u003cli\u003eAll‑aluminum housing with temperature control chips\u003c\/li\u003e\n  \u003cli\u003eImproved heat dissipation claiming roughly 200% better performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what environmental protection do I get?\u003c\/h3\u003e\n\u003cp\u003eThe compact all‑in‑one design removes the need for bulky external drivers and simplifies installation to a few minutes in most vehicles. The lamp is IP68 water and dust resistant, starts in 0.1 seconds and is rated for rugged use on wet roads or light offroad conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize reduced by about 30% versus larger LED assemblies\u003c\/li\u003e\n  \u003cli\u003eNo external driver — true plug‑and‑play setup\u003c\/li\u003e\n  \u003cli\u003eIP68 waterproof rating for wet and dusty conditions\u003c\/li\u003e\n  \u003cli\u003eFast 0.1s startup and reliable performance in varied climates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The Auxbeam F18 Series suits drivers who want a direct, high‑output upgrade to their H11\/H8\/H9 fog or auxiliary lights without complicated wiring or bulky hardware. It’s a good match for daily commuters seeking safer low‑angle visibility, truck and SUV owners using fog lamps for trail approach lighting, and anyone who wants a compact, durable LED replacement with wide vehicle compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these bulbs plug-and-play for H11 housings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The F18 Series uses a compact all-in-one design intended for direct H11\/H8\/H9 socket replacement without external drivers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these cause dashboard errors on modern cars?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most likely not. Built-in decoding chips prevent errors for about 99% of vehicles; a few sensitive systems may need an additional decoder.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Auxbeam","offers":[{"title":"Default Title","offer_id":48080912154782,"sku":"B0DQSRCDZJ","price":94.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/auxbeam-f18-front-view.jpg?v=1785792206","url":"https:\/\/northtrailauto.ca\/products\/auxbeam-f18-series-led-fog-lights-h11-h8-h9-22-000lm-plug-and-play-ip68-durable","provider":"North Trail Auto","version":"1.0","type":"link"}