{"product_id":"auxito-h11-led-fog-light-bulbs-6500k-cool-white-pack-of-2-60-000lm-120w-plug-and-play","title":"AUXITO H11 LED Fog Light Bulbs — 6500K Cool White Pack of 2, 60,000LM 120W Plug-and-Play","description":"\u003cstrong\u003eAUXITO H11 LED Bulbs are a plug-and-play halogen replacement that delivers a sharp 6500K cool-white beam, rated 120W and 60,000 lumens per set for brighter, clearer fog-light performance.\u003c\/strong\u003e\n\n\u003cp\u003eThese AUXITO H11 fog light bulbs are engineered to upgrade halogen fog lights with a compact LED design that closely mimics the filament position of factory bulbs. Each bulb uses 12 CSP chips and an intelligent driver so the beam pattern stays controlled while minimizing glare to oncoming drivers. Built from aviation-grade aluminum with active cooling and IP67 water resistance, the bulbs aim to provide long life and broad vehicle compatibility without extra wiring.\u003c\/p\u003e\n\n\u003ch3\u003eHow much brighter are these bulbs compared to stock halogen fog lights?\u003c\/h3\u003e\n\u003cp\u003eThe AUXITO H11 kit boosts light output dramatically: the set is specified at 60,000 lumens and about 120W total, marketed as up to 1,200% brighter than many stock halogen bulbs. The 6500K cool-white color temperature produces a crisp, daylight-like appearance that improves contrast in low-light conditions without shifting to colored tints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e60,000LM total per set (both bulbs combined)\u003c\/li\u003e\n  \u003cli\u003e120W total power draw per set\u003c\/li\u003e\n  \u003cli\u003e6500K cool white output for clear, neutral illumination\u003c\/li\u003e\n  \u003cli\u003e12 CSP LED chips per bulb for concentrated brightness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these LEDs create glare for oncoming drivers?\u003c\/h3\u003e\n\u003cp\u003eAUXITO prioritizes chip placement to mimic halogen filament position so the beam cutoff and hotspot align with factory housings. That design helps form a clean, focused beam instead of a scattered flood that can blind others. Proper installation in the correct fog-light housing is still important to maintain a safe beam pattern.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLED chips positioned to match halogen filament geometry\u003c\/li\u003e\n  \u003cli\u003eEngineered beam pattern to reduce scattering and glare\u003c\/li\u003e\n  \u003cli\u003eBest used in housings designed for H8\/H9\/H11 bulb formats\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play fit maintains factory aiming when installed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are these bulbs for everyday driving?\u003c\/h3\u003e\n\u003cp\u003eThese AUXITO LEDs are built with a full aluminum lamp body and a high-speed cooling fan rated at 12,000 RPM to manage heat. A double-sided copper circuit board improves thermal transfer, and IP67 waterproofing allows the bulbs to withstand wet conditions. AUXITO rates the bulbs for up to 50,000 hours under continuous operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAviation-grade aluminum housing for heat dissipation\u003c\/li\u003e\n  \u003cli\u003e12,000 RPM active cooling fan included\u003c\/li\u003e\n  \u003cli\u003eDouble-sided copper PCB for efficient heat transfer\u003c\/li\u003e\n  \u003cli\u003eIP67 water- and dust-resistance and 50,000-hour lifespan rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and will these work with my vehicle’s electronics?\u003c\/h3\u003e\n\u003cp\u003eThe bulbs are designed to be nearly the same size as halogen bulbs and use a non-polarity socket for simple swap-in replacement. AUXITO includes an intelligent built-in IC driver to maximize compatibility; the product is described as Canbus-ready and compatible with about 99% of vehicle systems. Most installations take only a few minutes per side and require no modification.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eNear 1:1 size match to halogen bulbs for straightforward fit\u003c\/li\u003e\n  \u003cli\u003eNon-polarity socket for easier plug-and-play swapping\u003c\/li\u003e\n  \u003cli\u003eBuilt-in intelligent IC driver to minimize error codes\u003c\/li\u003e\n  \u003cli\u003eCompatible with H8, H9 and H11 fog-light housings and wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: drivers who want a high-output, compact LED fog-light replacement that keeps a controlled beam while offering long life and wide vehicle compatibility. These AUXITO H11 bulbs suit people replacing dim halogen fogs, owners of cars with factory-style housings who need correct chip positioning, and anyone seeking a straightforward plug-and-play upgrade without extra ballasts or complex rewiring.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these AUXITO H11 bulbs compatible with my H8 or H9 fog light housing?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the bulbs are designed for H8\/H9\/H11 housings and use a near 1:1 size profile for broad compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does installation take and do I need extra parts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Most installs take about five minutes per side and are plug-and-play; no extra ballasts or wiring are typically required.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"AUXITO","offers":[{"title":"Default Title","offer_id":48082763972766,"sku":"B0B71GWVCC","price":112.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/auxito-h11-front-angle.jpg?v=1785813543","url":"https:\/\/northtrailauto.ca\/products\/auxito-h11-led-fog-light-bulbs-6500k-cool-white-pack-of-2-60-000lm-120w-plug-and-play","provider":"North Trail Auto","version":"1.0","type":"link"}