{"product_id":"bal-rv-slideout-gearbox-with-13-tooth-sprocket-and-pre-installed-bracket-universal-fit-replacement","title":"BAL RV Slideout Gearbox with 13-Tooth Sprocket and Pre-Installed Bracket — Universal-Fit Replacement","description":"\u003cp\u003e\u003cstrong\u003eThis BAL R25076-1 gearbox is a ready-to-install slideout replacement featuring a 13-tooth sprocket and an integrated mounting bracket for faster fit-up.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your RV slideout is sluggish or the original gearbox has worn out, this BAL replacement unit offers a direct, universal-fit option built from quality components. The assembly arrives with the mounting bracket pre-installed to simplify installation and reduce alignment adjustments. Designed to restore smooth gear engagement, it pairs the 13-tooth sprocket with durable internal gearing to handle typical slideout loads while keeping installation time to a minimum.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 13-tooth sprocket affect slideout operation?\u003c\/h3\u003e\n\u003cp\u003eA 13-tooth sprocket determines the gearing ratio between the motor and the slideout mechanism, influencing speed and torque. This tooth count balances movement speed with the force needed to extend and retract a typical RV slideout. It’s suited to many factory slide mechanisms where moderate torque and controlled movement are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProvides a medium gearing ratio for steady, controlled motion\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard slideout chains or sprocket-driven systems\u003c\/li\u003e\n  \u003cli\u003eHelps prevent abrupt starts and stops for smoother engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes included and why is the bracket important?\u003c\/h3\u003e\n\u003cp\u003eThis unit ships with the mounting bracket factory-installed so you don’t have to source or align separate hardware. The bracket secures the gearbox to the slideout frame, maintaining correct alignment and reducing the risk of premature wear caused by misalignment. A pre-attached bracket also saves time during replacement and reduces installation steps.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-installed mounting bracket for quicker, more accurate fit-up\u003c\/li\u003e\n  \u003cli\u003eBracket maintains gear alignment and reduces binding risk\u003c\/li\u003e\n  \u003cli\u003eLess on-site fabrication or adjustment required compared to bracketless units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable is this replacement gearbox?\u003c\/h3\u003e\n\u003cp\u003eBAL constructs this gearbox from quality parts and materials sized for slideout loads common in RV applications. Internal gearing and housing materials are selected for consistent engagement and resistance to wear over repeated cycles. Proper installation and occasional maintenance will help maintain performance over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMade with robust internal components to resist wear\u003c\/li\u003e\n  \u003cli\u003eEngineered for consistent engagement across cycles\u003c\/li\u003e\n  \u003cli\u003eUniversal-fit design reduces compatibility issues with common slideout systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my RV slideout and how difficult is installation?\u003c\/h3\u003e\n\u003cp\u003eThe gearbox is marketed as a universal-fit replacement, intended to match many OEM slideout setups that use a 13-tooth sprocket configuration. Because the bracket is pre-attached, installation is typically straightforward for technicians or experienced DIYers familiar with RV slide mechanisms. Confirm measurements and mounting points against your existing unit before purchase to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal-fit for common 13-tooth sprocket slideout mechanisms\u003c\/li\u003e\n  \u003cli\u003ePre-mounted bracket simplifies alignment and mounting steps\u003c\/li\u003e\n  \u003cli\u003eRecommended: compare bracket hole pattern and shaft size to original unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: RV owners, mobile technicians, and service shops replacing a worn or failed slideout gearbox who need a dependable, pre-bracketed replacement with a 13-tooth sprocket. Choose this BAL R25076-1 if you want a straightforward swap that reduces installation time while restoring reliable slideout movement. Always verify the spline\/shaft dimensions and bracket hole pattern against your existing assembly before ordering.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the BAL R25076-1 gearbox a direct replacement?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It’s a universal-fit replacement intended for many slideouts; verify bracket hole pattern and shaft size against your original.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the unit include a mounting bracket?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the gearbox comes with the mounting bracket pre-installed to simplify installation and alignment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BAL","offers":[{"title":"Default Title","offer_id":48081498865822,"sku":"B07XVX7W9L","price":131.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/bal-r25076-1-front-mounting-view.jpg?v=1785806823","url":"https:\/\/northtrailauto.ca\/products\/bal-rv-slideout-gearbox-with-13-tooth-sprocket-and-pre-installed-bracket-universal-fit-replacement","provider":"North Trail Auto","version":"1.0","type":"link"}