{"product_id":"betybedy-3l-transmission-fluid-pump-kit-manual-atf-transfer-pump-with-13-adapters-pressure-gauge-35-4-hose","title":"BetyBedy 3L Transmission Fluid Pump Kit — Manual ATF Transfer Pump with 13 Adapters \u0026 Pressure Gauge, 35.4\" Hose","description":"\u003cp\u003e\u003cstrong\u003eBetyBedy's 3L Transmission Fluid Pump Kit is a hand-operated ATF transfer system with 13 adapters, a built-in pressure gauge and a long hose for accurate, portable transmission fluid filling.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit groups the tools you need to move transmission fluid cleanly and controllably during maintenance and repairs. The pump uses manual lever\/piston action to draw fluid from a container and deliver it into a transmission fill or drain port. With a 3-liter reservoir, a 35.43\" hose, a pressure gauge and a pressure-release valve, the set is built for garages, DIYers and mobile technicians who need a compact, adaptable solution for many vehicle makes and models.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the pump make transmission fluid changes easier?\u003c\/h3\u003e\n\n\u003cp\u003eThe manual pump removes the need for bulk pouring or messy siphons by creating a controlled flow from your oil tank into the transmission. Lever or piston action lets you work without electricity, and the long hose reaches into tight engine bays or undercarriage fill points. A pressure gauge helps you monitor the process to avoid overfilling while the release valve lets you bleed pressure safely when finished.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e3L reservoir reduces refill trips during service\u003c\/li\u003e\n  \u003cli\u003eHand-operated design works anywhere without power\u003c\/li\u003e\n  \u003cli\u003eIntegrated gauge and release valve for safer filling\u003c\/li\u003e\n  \u003cli\u003e35.43\" hose length accesses hard-to-reach ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the 13 adapters fit my vehicle's transmission ports?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes 13 ATF adapters covering a wide range of thread sizes and connector styles to match many cars, trucks and SUVs. Before beginning work, compare adapter threads with your transmission’s fill plug or drain port to ensure a secure connection. If an exact match isn’t included, adapters often sit close enough for a leak-free seal with light Teflon tape or the correct hose clamp.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThirteen distinct adapters for varied thread patterns\u003c\/li\u003e\n  \u003cli\u003eAdapters connect directly to fill ports or drain plugs\u003c\/li\u003e\n  \u003cli\u003eUse thread tape or clamps when necessary for tight seals\u003c\/li\u003e\n  \u003cli\u003eCheck fit before pressurizing—do not exceed 40 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the pressure gauge and release valve improve accuracy?\u003c\/h3\u003e\n\n\u003cp\u003eThe built-in pressure gauge gives a real-time reading of the pump pressure so you can avoid exceeding the recommended limit. The release valve provides a quick and safe method to reduce pressure before disconnecting hoses or adapters. Together they help maintain consistent flow and protect transmission seals and gaskets from overpressure during filling.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePressure gauge shows current PSI while dispensing\u003c\/li\u003e\n  \u003cli\u003eRelease valve allows controlled depressurization before disconnection\u003c\/li\u003e\n  \u003cli\u003eDo not exceed the kit's 40 PSI safety limit\u003c\/li\u003e\n  \u003cli\u003eHelps prevent overfill and fluid spillage during service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and usability tips should I follow when using this pump?\u003c\/h3\u003e\n\n\u003cp\u003eAlways secure the correct adapter and confirm a tight connection before pumping. Keep the unit upright on a stable surface, monitor the gauge during operation and never disconnect adapters while the system is pressurized. Clean the hose and fittings after use to prevent cross-contamination between fluid types.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMatch adapter threads to the transmission port before use\u003c\/li\u003e\n  \u003cli\u003eKeep pressure below 40 PSI; use release valve to depressurize\u003c\/li\u003e\n  \u003cli\u003eStore and flush hoses to avoid mixing fluids between jobs\u003c\/li\u003e\n  \u003cli\u003eWear gloves and eye protection when handling ATF\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? BetyBedy's 3L Transmission Fluid Pump Kit is aimed at professional mechanics, independent technicians and hands-on car owners who perform routine transmission service or frequent fluid changes. It’s ideal when portability, adapter variety and pressure control matter—especially for roadside service, small shops, and home garages that need a low-tech yet precise fluid transfer solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the pump capacity and hose length?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The reservoir holds 3 liters and includes a 35.43\" hose for long-reach filling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I exceed 40 PSI while filling?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — do not exceed the 40 PSI limit; use the gauge and release valve to control pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BetyBedy","offers":[{"title":"Default Title","offer_id":48083327516830,"sku":"B0DCZLZ6NJ","price":54.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/betybedy-front-view-kit.jpg?v=1785831662","url":"https:\/\/northtrailauto.ca\/products\/betybedy-3l-transmission-fluid-pump-kit-manual-atf-transfer-pump-with-13-adapters-pressure-gauge-35-4-hose","provider":"North Trail Auto","version":"1.0","type":"link"}