{"product_id":"biobor-diesel-fuel-additive-32-oz-biocide-lubricity-supplement-dual-phase-protection-for-tanks-and-injectors","title":"BIOBOR Diesel Fuel Additive 32 oz — Biocide \u0026 Lubricity Supplement, Dual-Phase Protection for Tanks and Injectors","description":"\u003cp\u003e\u003cstrong\u003eBIOBOR JF is a concentrated diesel fuel biocide and lubricity supplement that kills and prevents microbial contamination while restoring injector and pump protection.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned and used by engine manufacturers, commercial airlines and military fleets since 1965, BIOBOR JF addresses the two most common fuel problems: microbial growth in tanks and diminished lubricity in modern ultra-low sulfur diesel (ULSD). It works across both the water and fuel phases to neutralize bacteria and fungi, reduce corrosion, and return lost lubrication to protect injectors and fuel pumps. The result is cleaner fuel, longer-lasting filters, and reduced risk of fuel-system damage.\u003c\/p\u003e\n\n\u003ch3\u003eHow does BIOBOR JF stop microbes from clogging my fuel system?\u003c\/h3\u003e\n\u003cp\u003eBIOBOR JF contains a biocidal formula that partitions into both water and fuel layers, reaching microbial colonies where they thrive. It eliminates existing biomass and prevents regrowth when dosed at manufacturer-recommended levels, helping maintain a sterile tank environment.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTargets bacteria and fungi in the water phase and fuel phase\u003c\/li\u003e\n  \u003cli\u003eBreaks down slimy mats and biomass that plug filters\u003c\/li\u003e\n  \u003cli\u003ePrevents rapid population doubling and filter-clogging events\u003c\/li\u003e\n  \u003cli\u003eReduces need for expensive fuel polishing or tank cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill BIOBOR JF protect my engine’s injectors and fuel pump?\u003c\/h3\u003e\n\u003cp\u003eYes. Besides its antimicrobial action, BIOBOR JF restores lubricity lost during the ULSD refining process, meeting and exceeding ASTM lubricity benchmarks. That added lubrication reduces wear on high-pressure components, extending service life and lowering repair costs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores lubricity to meet industry HFRR standards (ASTM-D6079)\u003c\/li\u003e\n  \u003cli\u003eReduces injector and pump wear caused by low-lubricity fuels\u003c\/li\u003e\n  \u003cli\u003eHelps maintain precise fuel delivery and combustion stability\u003c\/li\u003e\n  \u003cli\u003eSuitable as a preventive measure for stored or intermittently used diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the dual-phase chemistry work and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eDual-phase chemistry means the product partitions into both the water layer (where microbes often concentrate) and the bulk fuel. This ensures the active ingredients reach and neutralize organisms across interfaces, and also treats acidic metabolic by-products that accelerate corrosion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMigrates to water pockets and fuel to attack microbes at the source\u003c\/li\u003e\n  \u003cli\u003eNeutralizes corrosive by-products from microbial metabolism\u003c\/li\u003e\n  \u003cli\u003eHelps prevent metal pitting, rust and tank degradation\u003c\/li\u003e\n  \u003cli\u003eReduces sludge and sediment formation that cause blockages\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use BIOBOR JF for stored or in-service diesel?\u003c\/h3\u003e\n\u003cp\u003eDosage and treatment frequency depend on fuel condition, storage duration and tank size; follow label directions for best results. For proactive protection, treat when fuel is loaded into tanks or as part of scheduled maintenance to prevent microbial colonization and maintain lubricity.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTreat at recommended concentrations for initial clean-up and routine maintenance\u003c\/li\u003e\n  \u003cli\u003eUse before long storage periods or after receiving contaminated fuel\u003c\/li\u003e\n  \u003cli\u003eKeep records of treatments to optimize dosing intervals\u003c\/li\u003e\n  \u003cli\u003eCombine with good tank-management practices (drain water, inspect filters)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: BIOBOR JF is ideal for diesel vehicle and equipment owners, fleet managers, marine operators, agricultural and construction operators, fuel storage facilities and anyone who stores or relies on ULSD. If you want to prevent filter clogging, reduce corrosion risk, and restore lubricity to protect injectors and pumps, this 32-ounce concentrate offers a proven, manufacturer-recommended solution used by OEMs and military operators worldwide.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How often should I treat stored diesel with BIOBOR JF?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Treat on fuel receipt and again before long-term storage; follow label dosing and inspect tanks every 3–6 months.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is BIOBOR JF safe for modern diesel engines and fuel systems?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; OEM-recommended, it restores lubricity to ASTM standards and is compatible when used as directed.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"BIOBOR","offers":[{"title":"Default Title","offer_id":48079814590622,"sku":"B007ILFKS6","price":79.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/biobor-jf-front-label-32oz.jpg?v=1785771523","url":"https:\/\/northtrailauto.ca\/products\/biobor-diesel-fuel-additive-32-oz-biocide-lubricity-supplement-dual-phase-protection-for-tanks-and-injectors","provider":"North Trail Auto","version":"1.0","type":"link"}