{"product_id":"bolvixor-recessed-d-ring-tie-down-anchors-4-pack-6000-lb-galvanized-flush-mount-with-6-5-backing-plates","title":"Bolvixor Recessed D-Ring Tie Down Anchors 4-Pack — 6000 lb Galvanized Flush-Mount with 6.5\" Backing Plates","description":"\u003cstrong\u003eBolvixor Recessed D-Ring Tie Down Anchors are a 4-pack of flush-mount, galvanized steel tie-downs rated for a 6000 lb assembly break strength, supplied with large 6.5\" backing plates and installation hardware for secure mounting.\u003c\/strong\u003e\n\n\u003cp\u003eWhether you haul ATVs, motorcycles, furniture, or heavy pallets, reliable anchor points on a trailer or truck bed make the difference between safe transport and shifting loads. These Bolvixor recessed D-rings are built to sit flush when not in use, lift when needed, and spread load stress across a large backing plate to protect wooden or metal floors. The kit arrives ready to install so you can add robust tie-down points without extra trips to the hardware store.\u003c\/p\u003e\n\n\u003ch3\u003eHow strong are these anchors and what does the 6000 lb rating mean?\u003c\/h3\u003e\n\u003cp\u003eEach D-ring assembly is engineered with a 6000-pound break strength rating, reflecting the maximum force the mounted assembly can withstand before failure when properly installed. That rating applies to the entire mounted assembly, including the ring, face plate, backing plate, and fasteners tightened to recommended torque.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6000 lb assembly break strength per anchor for heavy loads.\u003c\/li\u003e\n  \u003cli\u003eSolid galvanized steel construction resists rust and outdoor corrosion.\u003c\/li\u003e\n  \u003cli\u003eLarge backing plate spreads load to reduce pull-through risk.\u003c\/li\u003e\n  \u003cli\u003eRating assumes correct bolt pattern, hardware use, and substrate strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do these recessed D-rings install and what hardware is included?\u003c\/h3\u003e\n\u003cp\u003eThe Bolvixor kit comes complete with the face plates, 6.5\" x 6.5\" backing plates, and the necessary mounting bolts and screws so you can bolt them in place right away. They are designed for bolted installations through wood, metal, or composite trailer floors when paired with the backing plate on the underside.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes face plates, backing plates, and mounting bolts\/screws for a full install.\u003c\/li\u003e\n  \u003cli\u003eCutout and bolt pattern sized for a secure, flush fit on flat surfaces.\u003c\/li\u003e\n  \u003cli\u003eBacker plate reduces localized stress and prevents bolt pull-through.\u003c\/li\u003e\n  \u003cli\u003eInstallation requires common tools: drill, socket set, and torque wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill the flush design interfere with loading or create trip hazards?\u003c\/h3\u003e\n\u003cp\u003eThe D-ring sits completely flush when stowed, eliminating a raised obstruction while rolling vehicles or sliding cargo over the floor. When you need a tie-down point, the ring lifts up easily to accept straps, chains, or hooks and then folds back down to a low profile.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFlush-mount face plate keeps floor profile flat for vehicle movement.\u003c\/li\u003e\n  \u003cli\u003eRing pivots up for fast access, then lays flat to avoid snags.\u003c\/li\u003e\n  \u003cli\u003eLow-profile design reduces tripping or interference with cargo placement.\u003c\/li\u003e\n  \u003cli\u003eGalvanized finish adds durability for repeated use and outdoor exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat types of vehicles and loads are these D-rings best for?\u003c\/h3\u003e\n\u003cp\u003eThese recessed anchors suit a wide range of hauling setups: utility and enclosed trailers, pickup beds, flatbeds, RVs, and workshop or warehouse floors where secure tie points are needed. They are intended to anchor straps and chains to stabilize motorcycles, ATVs, equipment, furniture, and heavy palletized loads during transit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommonly used for ATVs, UTVs, motorcycles, and small vehicle transport.\u003c\/li\u003e\n  \u003cli\u003eGood for securing furniture, appliances, and palletized freight.\u003c\/li\u003e\n  \u003cli\u003eWorks in trailers, truck beds, flatbeds, and enclosed cargo areas.\u003c\/li\u003e\n  \u003cli\u003eMust be installed into structurally sound flooring for rated performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Bolvixor recessed D-ring anchors are aimed at owners and operators who need dependable, low-profile tie-down points for heavy or shifting loads — from weekend riders and moving professionals to contractors and fleet operators. If you want strong, corrosion-resistant anchors that reduce floor damage and install with included hardware, this kit provides a practical, ready-to-mount solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are mounting bolts included with the Bolvixor D-ring kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit includes face plates, 6.5\" backing plates, and the required mounting bolts and screws for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can these anchors be used in a wooden trailer floor?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — when installed with the included backing plate and correct bolt torque, they secure well to wood but require solid underlying structure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Bolvixor","offers":[{"title":"Default Title","offer_id":48086789193886,"sku":"B0GRMYK8R6","price":58.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/bolvixor-front-faceplate-closeup.jpg?v=1785905290","url":"https:\/\/northtrailauto.ca\/products\/bolvixor-recessed-d-ring-tie-down-anchors-4-pack-6000-lb-galvanized-flush-mount-with-6-5-backing-plates","provider":"North Trail Auto","version":"1.0","type":"link"}