{"product_id":"curt-loaded-ball-mount-with-2-ball-2-shank-6-drop-7-500-lb-capacity-factory-torqued","title":"CURT Loaded Ball Mount with 2\" Ball — 2\" Shank, 6\" Drop, 7,500 lb Capacity, Factory-Torqued","description":"\u003cp\u003e\u003cstrong\u003eCURT's loaded ball mount with a factory-torqued 2\" ball is a ready-to-use towing solution rated to 7,500 lbs gross trailer weight and 750 lbs tongue weight.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pre-assembled CURT loaded ball mount arrives with a 2\" trailer ball, pin and clip already installed and torqued, so you can hitch and go without mounting hardware or measuring torque. Built on a 2\" x 2\" hollow shank with a 6\" drop and a 9-1\/4\" overall length, the unit balances strength and convenience for common towing tasks like hauling boats, campers, utility trailers and ATVs. The gloss black powder-coat finish adds corrosion and UV resistance for long service life when exposed to road and weather conditions.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 6\" drop affect trailer leveling and clearance?\u003c\/h3\u003e\n\u003cp\u003eA 6\" drop lowers the ball relative to the hitch height so trailers sit level when attached to taller tow vehicles. This helps maintain proper tongue weight distribution and reduces strain on the trailer and tow vehicle. It also increases ground clearance for the trailer frame during turns compared with deeper drops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e6\" drop helps level trailers with higher hitch mounts\u003c\/li\u003e\n  \u003cli\u003eImproves tongue weight balance for safer towing\u003c\/li\u003e\n  \u003cli\u003eOffers better ground clearance than longer drops on turns\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat compatibility should I check before buying this CURT ball mount?\u003c\/h3\u003e\n\u003cp\u003eConfirm your vehicle’s hitch receiver is 2\" x 2\" and rated for at least 7,500 lbs gross trailer weight. Match the 2\" factory-torqued ball to your trailer coupler size and ensure your trailer’s tongue weight stays under 750 lbs. Always verify the lowest-rated towing component—vehicle, hitch, coupler, or ball mount—determines the safe towing limit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReceiver opening must be 2\" x 2\"\u003c\/li\u003e\n  \u003cli\u003eTrailer coupler must accept a 2\" ball\u003c\/li\u003e\n  \u003cli\u003eDo not exceed the lowest rating among hitch components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy choose a loaded ball mount over a separate ball and mount?\u003c\/h3\u003e\n\u003cp\u003eLoaded ball mounts arrive pre-fitted with a factory-torqued trailer ball and include the needed pin and clip, eliminating installation steps and torque verification. This reduces setup time, minimizes the risk of incorrect torque or mismatched parts, and ensures the ball is mounted to the manufacturer’s specifications for reliable performance. The hollow shank also reduces weight and works with anti-rattle accessories for a quieter ride.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFactory-torqued ball saves assembly and torque checks\u003c\/li\u003e\n  \u003cli\u003eComes with pin and clip for immediate installation\u003c\/li\u003e\n  \u003cli\u003eHollow shank compatible with anti-rattle kits to reduce noise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the finish and construction on the CURT loaded ball mount?\u003c\/h3\u003e\n\u003cp\u003eThe gloss black powder-coat finish resists rust, chipping and UV damage for extended appearance and corrosion protection. CURT constructs the shank and mount to handle regular towing loads within the rated capacities, and the factory-installed ball is torqued to specification for consistent performance. Regular inspection and maintenance will extend service life under heavy use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGloss powder-coat defends against corrosion and chips\u003c\/li\u003e\n  \u003cli\u003eFactory torque ensures consistent ball attachment strength\u003c\/li\u003e\n  \u003cli\u003eHollow, high-strength shank balances durability and weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Tow vehicle owners who need a dependable, ready-to-use 2\" ball mount for mid-range towing tasks — ideal for boat owners, RV users, utility trailer operators and recreational riders hauling ATVs, dirt bikes or motorcycles. If your receiver is 2\" x 2\" and your towing needs fit within a 7,500 lb gross trailer weight and 750 lb tongue weight limit, this CURT loaded ball mount offers a fast, reliable way to hitch up with confidence.\u003c\/p\u003e\n\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the 2\" ball pre-installed and torqued?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CURT loaded ball mount ships with a factory-torqued 2\" trailer ball so it's ready to use out of the box.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this fit my 2\" x 2\" hitch receiver?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The mount is designed for standard 2\" x 2\" receiver tubes and includes a pin and clip for installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"CURT","offers":[{"title":"Default Title","offer_id":48079845359774,"sku":"B07Q5VJ3TF","price":82.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/curt-loaded-ball-mount-front-profile.jpg?v=1785772630","url":"https:\/\/northtrailauto.ca\/products\/curt-loaded-ball-mount-with-2-ball-2-shank-6-drop-7-500-lb-capacity-factory-torqued","provider":"North Trail Auto","version":"1.0","type":"link"}