{"product_id":"deoxit-contact-care-kit-g100l-d100l-1-6ml-two-step-cleaner-and-gold-conditioner-with-precision-brush-applicators","title":"DeoxIT Contact Care Kit G100L + D100L 1.6ml — Two-step cleaner and gold conditioner with precision brush applicators","description":"\u003cp\u003e\u003cstrong\u003eDeoxIT Gold G100L and DeoxIT D100L are a two-step contact care kit: DeoxIT D gently removes contamination while DeoxIT Gold conditions and protects precious-metal and plated contacts for improved conductivity and lasting performance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eKeep connectors, switches and plated contacts working reliably with a compact pair of 1.6 ml brush-top vials. DeoxIT D100L is a fast-acting cleaner that dissolves oxidation and contaminants on metal surfaces; DeoxIT Gold G100L follows as a low-action conditioner that restores conductivity and lays down an anti-tarnish barrier on gold, silver, rhodium, copper and other precious metal surfaces. The brush applicators make precise, controlled application easy for delicate electronics, audio gear, and precision connectors.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these two liquids work together on damaged or dirty contacts?\u003c\/h3\u003e\n\u003cp\u003eUse DeoxIT D first when visible tarnish or corrosion is present; its stronger cleaning action breaks down oils, oxidation and grime. After the surface looks clean and dry, apply DeoxIT Gold to fine-tune conductivity and deposit a thin protective film that reduces future oxidation and intermittent connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDeoxIT D: quicker-cleaning action for visible discoloration and heavy contamination.\u003c\/li\u003e\n  \u003cli\u003eDeoxIT Gold: low-cleaning, high-conditioning formula for plated and precious metals.\u003c\/li\u003e\n  \u003cli\u003eBrush applicators give precise coverage without overspray or wasted fluid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich connectors and metals are best treated with this kit?\u003c\/h3\u003e\n\u003cp\u003eThe duo is formulated for a wide range of metal contacts: gold-plated pins, silver contacts, copper traces, nickel- and bronze-plated terminals, and delicate multi-pin connectors. DeoxIT Gold is especially suited as a final step on plated or precious-metal surfaces where only slight cleaning is needed and long-term protection is desired.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGold and silver-plated audio plugs, RCA, XLR, and instrument jacks.\u003c\/li\u003e\n  \u003cli\u003ePCB edge connectors, card-edge fingers and low-current signal contacts.\u003c\/li\u003e\n  \u003cli\u003ePrecision switches, mechanical relays and sensor terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these solutions help reduce noise, arcing or intermittent signals?\u003c\/h3\u003e\n\u003cp\u003eYes—the combination targets the common causes of electrical noise and intermittent connections. DeoxIT D removes conductive contamination that causes poor contact; DeoxIT Gold then enhances metal-to-metal conductivity and leaves a thin anti-tarnish layer that reduces arcing and signal degradation over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReduces intermittent connections by removing oxidation and restoring metal contact.\u003c\/li\u003e\n  \u003cli\u003eHelps decrease arcing and RFI by improving stable conductivity at mating surfaces.\u003c\/li\u003e\n  \u003cli\u003eForms a protective film that withstands temperature ranges typical in electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I apply the products safely and effectively?\u003c\/h3\u003e\n\u003cp\u003eWork in a well-ventilated area and use the brush applicators to gently coat the contact surfaces—DeoxIT D first for any heavy contamination, then DeoxIT Gold as the finishing step. Allow each application to dry as recommended; small vials and brush tops make spot treatments simple without flooding sensitive circuitry.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eApply DeoxIT D to visibly tarnished or dirty contacts; wipe away loosened residue.\u003c\/li\u003e\n  \u003cli\u003eAfter cleaning and drying, brush on DeoxIT Gold for conditioning and protection.\u003c\/li\u003e\n  \u003cli\u003eAvoid excess fluid on open circuits; test equipment after treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: technicians, audio engineers, instrument repairers, AV installers and hobbyists who maintain sensitive connectors and want a compact, two-step solution for cleaning and protecting metal contacts. This kit is ideal when you need a small, precise application—the brush-top 1.6 ml vials are portable and suitable for spot repairs, routine maintenance, and critical low-current signal connections where improved conductivity and long-term protection matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use DeoxIT Gold without DeoxIT D?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—apply Gold alone when surfaces look clean; use D first only for visible oxidation or heavy contamination.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these safe for gold-plated audio connectors?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the Gold formula is designed for plated and precious-metal contacts to improve contact and reduce tarnish.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DeoxIT","offers":[{"title":"Default Title","offer_id":48084340998302,"sku":"B01BW8VRVY","price":31.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/deoxit-dual-vials-brush-applicator.jpg?v=1785850839","url":"https:\/\/northtrailauto.ca\/products\/deoxit-contact-care-kit-g100l-d100l-1-6ml-two-step-cleaner-and-gold-conditioner-with-precision-brush-applicators","provider":"North Trail Auto","version":"1.0","type":"link"}