{"product_id":"devilbiss-startingline-hvlp-auto-painting-priming-kit-2-gun-1-3-1-8-mm-600cc-cups-carry-case","title":"DeVilbiss StartingLine HVLP Auto Painting \u0026 Priming Kit — 2-Gun (1.3\/1.8 mm), 600cc Cups, Carry Case","description":"\u003cp\u003e\u003cstrong\u003eThe DeVilbiss StartingLine HVLP Complete Auto Painting and Priming Kit is a two-gun spray system designed for DIYers and hobbyists to apply basecoat, clearcoat and primer with professional-style atomization and a portable carrying case.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact kit pairs two full-size StartingLine gravity-feed HVLP spray guns — one optimized for finish coats and the other for priming — plus essential accessories so you can move from surface preparation to final topcoat without hunting for parts. Built to perform on small repairs, automotive panels and refinishing projects, the kit balances spray quality with user-friendly setup and maintenance tools.\u003c\/p\u003e\n\n\u003ch3\u003eWhich coatings can I spray with the included finish gun?\u003c\/h3\u003e\n\u003cp\u003eThe finish gun comes fitted with a 1.3 mm fluid tip, ideal for low-viscosity coatings where fine atomization matters. Use it for basecoats, clearcoats and other light automotive finishes to achieve consistent coverage and smooth appearance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.3 mm fluid tip for base and clear coats\u003c\/li\u003e\n  \u003cli\u003e600 cc (20 oz) gravity metal cup for continuous spraying\u003c\/li\u003e\n  \u003cli\u003eOperates at 30 PSI inlet delivering approximately 10 PSI cap pressure\u003c\/li\u003e\n  \u003cli\u003eRequires ~13 CFM air volume for proper spray performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat is the priming setup and when should I use it?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a second full-size StartingLine gun with a 1.8 mm fluid tip configured for primers, sealers and heavier body coatings. Choose this gun when applying primers, thinned latex or oil-based primers, or any medium-to-high viscosity materials that need larger fluid passages for reliable flow.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1.8 mm tip for primers, sealers and heavier coatings\u003c\/li\u003e\n  \u003cli\u003e600 cc metal cup for larger priming jobs without frequent refills\u003c\/li\u003e\n  \u003cli\u003eSame air requirements: 30 PSI inlet and roughly 10 PSI cap pressure\u003c\/li\u003e\n  \u003cli\u003eGood for both spot repairs and full-panel priming tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this kit help me set up, maintain and transport the guns?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes practical accessories that simplify setup, maintenance and storage so you can focus on painting rather than sourcing tools. A regulator with gauge lets you dial in consistent inlet pressure while cleaning and maintenance tools help extend gun life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAir regulator with gauge for consistent spray pressure\u003c\/li\u003e\n  \u003cli\u003eGun cleaning brush set and maintenance wrench for routine servicing\u003c\/li\u003e\n  \u003cli\u003eBlow-molded carrying case organizes tools and protects guns during transport\u003c\/li\u003e\n  \u003cli\u003eReplacement rebuild kits available to refresh wear parts over time\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat spray performance and shop requirements should I expect?\u003c\/h3\u003e\n\u003cp\u003eBoth guns are designed to reach good atomization at typical hobbyist compressor settings but they do have minimum air-volume needs. Make sure your compressor can deliver roughly 13 CFM at the recommended inlet pressure to maintain consistent spray patterns, especially on larger panels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e30 PSI inlet pressure recommended for both guns\u003c\/li\u003e\n  \u003cli\u003eApproximately 10 PSI air cap pressure during operation\u003c\/li\u003e\n  \u003cli\u003e~13 CFM air volume required for stable performance\u003c\/li\u003e\n  \u003cli\u003eMade in TW (Taiwan) with a 1-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this kit is for: This DeVilbiss StartingLine two-gun kit suits do-it-yourselfers, automotive enthusiasts and small-shop technicians looking for a cost-effective, portable solution to prime and finish panels. If you need a setup that covers both light-bodied finish coatings and heavier primers without buying separate guns and accessories, this kit provides a practical, ready-to-use package with rebuild options for long-term service.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do I need a special compressor for these guns?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Aim for a compressor that delivers about 13 CFM at the recommended pressure (30 PSI inlet) for stable operation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement parts or rebuild kits available?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — spray gun rebuild kits are available to refresh needles, nozzles and wear items over time.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DeVilbiss","offers":[{"title":"Default Title","offer_id":48081464426654,"sku":"B001G4ZTVE","price":333.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/devilbiss-startingline-two-gun-kit-open-case.jpg?v=1785805833","url":"https:\/\/northtrailauto.ca\/products\/devilbiss-startingline-hvlp-auto-painting-priming-kit-2-gun-1-3-1-8-mm-600cc-cups-carry-case","provider":"North Trail Auto","version":"1.0","type":"link"}