{"product_id":"drivefix-210amp-alternator-for-bmw-320i-328i-x1-x3-x4-210a-12v-6-groove-clutch-pulley","title":"DriveFix 210AMP Alternator for BMW 320i 328i X1 X3 X4 – 210A 12V, 6-Groove Clutch Pulley","description":"\u003cp\u003e\u003cstrong\u003eDriveFix 210AMP alternator is a direct-fit replacement for many BMW 2.0L turbo models, delivering 210A at 12V with clockwise rotation and a 6-groove clutch pulley.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf your BMW 320i, 328i, 428i, 528i, X1, X3 or X4 with the 2.0L L4 1997cc DOHC turbocharged engine is showing dimming lights, battery warning icons, or accessory faults, this DriveFix alternator is built to restore charging capacity. It’s engineered as a like-for-like unit for the specified model years and engine variant, designed to meet the electrical demand of modern BMW systems while using the original mounting and pulley configuration.\u003c\/p\u003e\n\n\u003ch3\u003eWhich BMW models and years will this alternator fit?\u003c\/h3\u003e\n\u003cp\u003eThis DriveFix alternator is specified for multiple BMW chassis and years that use the 2.0L L4 1997cc turbo engine. Confirm your VIN and engine code before purchase to ensure exact compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: 320i \/ 320i xDrive (2013–2018), 328i (2012–2016), 328i xDrive \/ Z4 (2013–2016)\u003c\/li\u003e\n  \u003cli\u003eAlso fits: 328i GT xDrive, 428i, 428i xDrive, 228i (selected 2014–2016 \/ 2015–2016 variants)\u003c\/li\u003e\n  \u003cli\u003eSUVs: X1 (2013–2015), X3 (2013–2017), X4 (2015–2018)\u003c\/li\u003e\n  \u003cli\u003eOnly for 2.0L L4 1997cc 122Cu gas DOHC turbocharged engines — not compatible with other displacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the key technical specifications and why they matter?\u003c\/h3\u003e\n\u003cp\u003eThe alternator supplies 210 amps at 12 volts, uses clockwise (CW) rotation and features a 6-groove clutch pulley. Those specs ensure electrical capacity, correct mechanical drive alignment, and proper belt engagement for stock accessory systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOutput: 210A \/ 12V — supports charging under high electrical loads\u003c\/li\u003e\n  \u003cli\u003eRotation: CW — matches factory directional rotation for these BMW engines\u003c\/li\u003e\n  \u003cli\u003ePulley: 6-groove clutch pulley — designed for OEM serpentine belt interface\u003c\/li\u003e\n  \u003cli\u003eForm factor: direct-fit mounting points for straightforward replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and what should I check?\u003c\/h3\u003e\n\u003cp\u003eInstallation is typically a bolt-on swap for technicians or experienced DIYers familiar with BMW accessory drives. Basic mechanical tools and safety steps are required; check wiring, connectors, and belt condition while replacing the unit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDisconnect battery negative before starting to prevent short circuits\u003c\/li\u003e\n  \u003cli\u003eInspect and replace the serpentine belt if worn — 6-groove alignment required\u003c\/li\u003e\n  \u003cli\u003eVerify electrical connectors and ground points for corrosion or damage\u003c\/li\u003e\n  \u003cli\u003eHave codes cleared and charging voltage confirmed after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance and reliability can I expect from this alternator?\u003c\/h3\u003e\n\u003cp\u003eDesigned as a direct-fit replacement with OEM-style specifications, the DriveFix alternator restores factory charging capacity and interaction with vehicle electronics. Properly installed, it supports driving accessories, battery charging, and start\/stop electrical demands typical of the listed BMW models.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRestores specified 210A charging output for high-load conditions\u003c\/li\u003e\n  \u003cli\u003eMaintains correct belt and pulley engagement with 6-groove clutch pulley\u003c\/li\u003e\n  \u003cli\u003eMatches factory rotation to protect accessory pumps and compressors\u003c\/li\u003e\n  \u003cli\u003eBuilt to fit mounting geometry to minimize installation adjustments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The DriveFix 210A alternator is aimed at BMW owners, independent shops, and professional mechanics who need a reliable, direct-fit charging unit for 2.0L turbocharged BMW engines across the 320i, 328i, 428i, 528i and X-series models listed above. Choose this part when you require OEM-like specs — 210A output, CW rotation, and a 6-groove clutch pulley — to restore electrical system performance while keeping installation time and modification to a minimum.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this alternator fit my 2015 BMW 328i xDrive?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it fits 328i xDrive models from 2013–2016 that use the 2.0L L4 1997cc turbocharged engine. Verify your engine code to confirm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this unit include a clutch pulley and meet OEM output?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It features a 6-groove clutch pulley and supplies 210A at 12V, matching the OEM output spec for listed applications.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"DriveFix","offers":[{"title":"Default Title","offer_id":48080461463710,"sku":"B0F2MKYVMQ","price":235.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/drivefix-alternator-front-view.jpg?v=1785781569","url":"https:\/\/northtrailauto.ca\/products\/drivefix-210amp-alternator-for-bmw-320i-328i-x1-x3-x4-210a-12v-6-groove-clutch-pulley","provider":"North Trail Auto","version":"1.0","type":"link"}