{"product_id":"evil-energy-1-2-transmission-oil-cooler-hose-10ft-250-psi-cpe-sae-j1532","title":"EVIL ENERGY 1\/2\" Transmission Oil Cooler Hose 10ft — 250 PSI CPE, SAE J1532","description":"\u003cb\u003eEVIL ENERGY 1\/2\" Transmission Oil Cooler Hose is a 10-foot, 250 PSI-rated CPE line designed to connect your transmission to an oil cooler with heat- and oil-resistant performance.\u003c\/b\u003e\n\n\u003cp\u003eThis heavy-duty transmission oil cooler hose meets SAE J1532 sizing and provides a dependable, flexible link between the cooler and transmission or hydraulic circuit. Built from chlorinated polyethylene (CPE), it balances flexibility, abrasion resistance, and chemical compatibility for transmission fluid, lubricants, hydraulic oil, and some gases. The hose’s working and burst pressure ratings, wide temperature tolerance, and minimum bend radius make it suitable for many automotive, industrial, and marine routing needs where a reliable oil-transfer hose is required.\u003c\/p\u003e\n\n\u003ch3\u003eHow tough is this hose for daily under-hood or field use?\u003c\/h3\u003e\n\u003cp\u003eThe hose is designed to handle routine operating stresses: a 250 psi continuous working pressure and a 1000 psi burst rating give a wide safety margin for common transmission cooling circuits. Its CPE construction resists heat, oil, and environmental exposure better than many generic rubber hoses, while the rated temperature range covers extreme cold starts and high under-hood temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking Pressure: 250 psi for sustained service\u003c\/li\u003e\n  \u003cli\u003eBurst Pressure: 1000 psi safety margin\u003c\/li\u003e\n  \u003cli\u003eTemperature Range: -40°F to 257°F for wide environmental tolerance\u003c\/li\u003e\n  \u003cli\u003eMaterial: chlorinated polyethylene (CPE) for oil and heat resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my application and how flexible is routing?\u003c\/h3\u003e\n\u003cp\u003eEVIL ENERGY’s hose has a 1\/2\" (12.5 mm) inner diameter and an overall outer diameter close to 0.79\" (20 mm), matching SAE J1532 expectations for many cooler-to-transmission lines. At 10 feet (3.05 meters), it provides generous length for routing in tight engine bays; the minimum bend radius specification helps you plan tight corners without kinking.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner Diameter: 1\/2\" (12.5 mm) to mate with standard fittings\u003c\/li\u003e\n  \u003cli\u003eOuter Diameter: ~0.79\" (20 mm) for clamp and fitting selection\u003c\/li\u003e\n  \u003cli\u003eLength: 10 feet for flexible placement options\u003c\/li\u003e\n  \u003cli\u003eMinimum Bend Radius: 112.5 mm to avoid kinks in tight paths\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems is this hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe hose is formulated to be compatible with transmission fluid and a broad range of oils and lubricants, plus many hydraulic fluids and gases used in auxiliary circuits. It’s intended as a transfer and return line between the transmission and cooler, not as a replacement for fuel or brake lines unless specifically stated by system designers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for: transmission fluid, engine oil, hydraulic fluids, lubricants\u003c\/li\u003e\n  \u003cli\u003eAccepts certain gases and non-aggressive media where specified\u003c\/li\u003e\n  \u003cli\u003eNot recommended for unspecified aggressive chemicals or fuels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the hose for longest service life?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: select compatible fittings and clamps sized for a 1\/2\" ID hose, avoid sharp bends below the minimum radius, and secure routing away from high friction points or extreme heat sources. Periodically inspect for chafing, swelling, or hardening and replace if any deterioration is observed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse proper clamps and SAE-compatible fittings for leak-free joints\u003c\/li\u003e\n  \u003cli\u003eAvoid routing across sharp edges or hot exhaust components\u003c\/li\u003e\n  \u003cli\u003eInspect regularly for wear, cracking, or fluid seepage\u003c\/li\u003e\n  \u003cli\u003eReplace at first signs of damage to maintain system safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY 1\/2\" Transmission Oil Cooler Hose is aimed at automotive technicians, performance tuners, fleet maintenance teams, and DIY enthusiasts who need a reliable, oil-resistant connection between a transmission and an external cooler. It’s a good fit when you require a rugged, flexible hose with clear pressure and temperature ratings for cooling, hydraulic return, or lubrication routing in cars, trucks, industrial equipment, and marine installations. If you need different diameter, reinforcement layers, or factory-specific certifications, check compatibility before substituting.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with ATF and other transmission fluids?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE construction is compatible with most automatic transmission fluids and common lubricants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend this hose tightly behind the engine?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: You should maintain at least the 112.5 mm minimum bend radius to avoid kinking and performance loss.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48083243630750,"sku":"B0BGBNSZKQ","price":61.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-closeup.jpg?v=1785829476","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-1-2-transmission-oil-cooler-hose-10ft-250-psi-cpe-sae-j1532","provider":"North Trail Auto","version":"1.0","type":"link"}