{"product_id":"evil-energy-1-fuel-transfer-hose-20-ft-1-id-farm-fuel-hose-for-diesel-gasoline-kerosene-150-psi","title":"EVIL ENERGY 1\" Fuel Transfer Hose 20 ft — 1\" ID Farm Fuel Hose for Diesel, Gasoline, Kerosene, 150 PSI","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 1\" Fuel Transfer Hose 20FT is a heavy-duty, 1-inch internal diameter fuel dispensing hose built for safe transfer of diesel, gasoline, kerosene and biodiesel blends.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis hose combines a nitrile-rubber inner tube, stainless-steel braid reinforcement and a PVC\/nitrile blended outer cover to deliver flexibility, abrasion resistance and chemical compatibility for farm, commercial and industrial fueling tasks. It is rated for a working pressure of 150 PSI, has a 300 mm minimum bending radius and operates across a wide temperature range, making it suitable for on-site fuel transfer, pump hookups and tank-to-tank dispensing.\u003c\/p\u003e\n\n\u003ch3\u003eHow robust is the hose for heavy farm and industrial use?\u003c\/h3\u003e\n\u003cp\u003eThe hose is engineered for demanding environments with a stainless-steel braid that prevents kinking while increasing burst strength. The exterior cover resists abrasion, and the nitrile inner is chosen for fuel resistance and low permeation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction: nitrile inner, stainless-steel braid, PVC\/nitrile outer.\u003c\/li\u003e\n  \u003cli\u003eStrength: 150 PSI working pressure; 435 PSI burst pressure.\u003c\/li\u003e\n  \u003cli\u003eDurability: abrasion-resistant outer and 300 mm minimum bend radius.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fuels and fluids can I safely transfer through this hose?\u003c\/h3\u003e\n\u003cp\u003eThis hose is compatible with a broad range of petroleum products and common fuel blends, including biodiesel and ethanol-containing fuels. It is suitable for diesel, gasoline, kerosene, mineral spirits, oils, and many biodiesel percentages up to 100% biodiesel when used according to industry practices.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with diesel, gasoline, kerosene and petroleum-based oils.\u003c\/li\u003e\n  \u003cli\u003eWorks with biodiesel blends (B20 and up to B100) and ethanol blends like E10–E85.\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for grease and some solvent applications; always verify chemical compatibility for specialty fluids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the dimensional and temperature limits I should expect?\u003c\/h3\u003e\n\u003cp\u003eThe hose measures 1-inch inside diameter and 35.5 mm outside diameter, with a 20-foot (6 m) length that fits common fueling layouts. It performs across a wide thermal span, so it remains flexible in cold weather and stable at elevated temperatures typical of fuel handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 1\" ID (25 mm); OD: 35.5 mm; length: 20 ft (6 m).\u003c\/li\u003e\n  \u003cli\u003eBend radius: minimum 300 mm to avoid kinks.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 212°F for versatile field use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and maintain this hose for longest service life?\u003c\/h3\u003e\n\u003cp\u003eUse the hose only with compatible fuels and avoid sharp bends, dragging over abrasive surfaces, or exposure to open flames. Routinely inspect fittings, clamps and the cover for wear; replace the hose if the inner tube shows swelling, cracking, or severe abrasion.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInstall with proper fittings and avoid overtightening or misaligned couplings.\u003c\/li\u003e\n  \u003cli\u003eFlush after transferring reactive fluids and drain before storage to prevent degradation.\u003c\/li\u003e\n  \u003cli\u003eStore coiled on a reel or shelf away from UV and chemicals; replace when damaged or aged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY's 1\" x 20FT Fuel Transfer Hose is designed for farmers, fleet operators, fuel distributors, and maintenance crews who need a reliable, fuel-compatible hose for refueling equipment, transferring product between tanks, or connecting pumps. If you require a flexible, reinforced hose with broad chemical compatibility and a robust working pressure for on-site fueling tasks, this model is a practical choice. Always match the hose to your fittings, follow safety procedures for fuel handling, and verify compatibility when using specialty solvents or additives.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle biodiesel blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the hose is compatible with biodiesel blends including B20 and can be used with higher biodiesel concentrations when maintained properly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fittings work with the 1\" ID hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use 1\" fuel-rated fittings and hose clamps designed for petroleum service; verify threads and sealing method before installation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48080738877598,"sku":"B0BYYZNFT2","price":130.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-view-packaging.jpg?v=1785784953","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-1-fuel-transfer-hose-20-ft-1-id-farm-fuel-hose-for-diesel-gasoline-kerosene-150-psi","provider":"North Trail Auto","version":"1.0","type":"link"}