{"product_id":"evil-energy-12an-braided-fuel-hose-20ft-black-cpe-core-500-psi-working-pressure","title":"EVIL ENERGY 12AN Braided Fuel Hose 20ft Black — CPE Core, 500 PSI Working Pressure","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 12AN braided fuel hose is a 20-foot, CPE rubber fuel line with 304 steel wire and nylon outer braid built for high-pressure automotive and racing fluid transfers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 12AN fuel line combines heat- and chemical-resistant CPE core material with a steel-reinforced layer and a durable nylon outer braid to deliver consistent performance across fuel, oil, coolant, and hydraulic applications. Designed for vehicle builders, tuners, and heavy-duty technicians, the hose is sized to work with 12AN swivel fittings and offers a wide operating temperature and pressure range suitable for demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose hold up under pressure and heat?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY AN12 hose is engineered for reliability when fluid systems are pushed hard. With a maximum continuous working pressure of 500 PSI and a burst rating around 1500 PSI, it resists deformation and maintains flow integrity at elevated temperatures.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum working pressure: 500 PSI\u003c\/li\u003e\n  \u003cli\u003eBursting pressure: approximately 1500 PSI\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range: -22°F to 248°F (-30°C to 120°C)\u003c\/li\u003e\n  \u003cli\u003eSteel wire reinforcement prevents kinking under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems is the AN12 braided hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis hose was developed to accept a broad spectrum of automotive and industrial fluids without rapid degradation. From gasoline blends and diesel to transmission oil and hydraulic fluids, the CPE core resists common fuel additives and lubricants.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gasoline, race gas, diesel, and fuel blends\u003c\/li\u003e\n  \u003cli\u003eSuitable for transmission fluid, oil, coolant, and hydraulic fluid\u003c\/li\u003e\n  \u003cli\u003eCan be used as fuel supply, return, vacuum, or oil feed line\u003c\/li\u003e\n  \u003cli\u003eNot intended for use without proper 12AN fittings and installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the hose dimensions and installation requirements?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY 12AN hose provides a balance of internal flow and external compatibility for AN12 systems. The internal diameter and outer dimensions match common AN12 swivel fittings; installation instructions are included and proper fittings are required for leak-free connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal diameter (ID): 0.65 inch\u003c\/li\u003e\n  \u003cli\u003eOuter diameter (OD): 0.93 inch\u003c\/li\u003e\n  \u003cli\u003eLength: 20 feet (single continuous length)\u003c\/li\u003e\n  \u003cli\u003eWorks with 12AN swivel hose ends only; installation instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the hose construction for real-world use?\u003c\/h3\u003e\n\u003cp\u003eDurability was prioritized through a three-layer design: a CPE rubber core for chemical resistance, a 304 stainless steel wire reinforcement for pressure handling, and a nylon braid for abrasion and UV resistance. That combination extends service life in racing, marine, and workshop environments where abrasion and heat are common.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCPE rubber core resists fuels and oils\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel wire improves pressure tolerance\u003c\/li\u003e\n  \u003cli\u003eNylon outer braid protects against abrasion and sunlight exposure\u003c\/li\u003e\n  \u003cli\u003eSuitable for repeated flexing and routing in tight engine bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? If you are a motorsports enthusiast, performance mechanic, custom fabricator, or fleet technician needing a reliable AN12-rated feed or return line, this EVIL ENERGY 12AN braided hose is built for those tasks. It suits projects that demand a continuous 20-foot length for routing, or those that will be cut to length and terminated with 12AN swivel fittings. Choose this hose when you want broad fluid compatibility, robust pressure endurance, and a reinforced construction that stands up to heat, vibration, and abrasion.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose for both gasoline and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE core and nylon braid are compatible with gasoline, race gas, and diesel for fuel supply or return lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose include fittings or only the hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The listing supplies only the 20-foot AN12 braided hose; 12AN swivel fittings are required and sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48081119903902,"sku":"B0DCC11FLX","price":105.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-an12-front-packaging.jpg?v=1785796682","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-12an-braided-fuel-hose-20ft-black-cpe-core-500-psi-working-pressure","provider":"North Trail Auto","version":"1.0","type":"link"}