{"product_id":"evil-energy-3-4-in-fuel-transfer-hose-14-ft-150-psi-nitrile-inner-with-stainless-steel-braid-for-diesel-and-gasoline","title":"EVIL ENERGY 3\/4 in Fuel Transfer Hose 14 ft — 150 PSI, nitrile inner with stainless-steel braid for diesel and gasoline","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 3\/4\" Fuel Transfer Hose (14 ft) is a heavy-duty, multi-fuel dispensing hose built for safe, flexible transfer of diesel, gasoline, kerosene and biodiesel in farm and industrial settings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eDesigned to meet the demands of on-site fueling, tank filling, and fuel pump hookups, this 3\/4\" (19 mm) ID hose combines a nitrile rubber inner tube, stainless steel braid reinforcement, and a PVC\/nitrile blended outer cover to resist fuel attack and abrasion. With a 14-foot length (4.3 m), 150 PSI working pressure, and a wide operating range from -40°F to 212°F, it’s engineered for year-round use on farms, job sites, or mobile refueling rigs.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this hose for regular farm and industrial use?\u003c\/h3\u003e\n\u003cp\u003eThe construction balances flexibility and strength: a fuel-resistant nitrile inner layer resists swelling and degradation while the stainless steel braid provides burst and kink protection. The outer PVC\/nitrile blend adds abrasion and weather resistance so the hose lasts under rough handling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner tube: nitrile rubber resists petroleum and biodiesel blends\u003c\/li\u003e\n  \u003cli\u003eReinforcement: stainless steel braid for added burst resistance\u003c\/li\u003e\n  \u003cli\u003eOuter cover: PVC\/nitrile blend protects against abrasion and sunlight\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: 150 PSI; bursting pressure: 435 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fuels and fluids are compatible with this EVIL ENERGY hose?\u003c\/h3\u003e\n\u003cp\u003eThis hose is specified for a wide range of hydrocarbon fuels and common fuel blends, making it suitable for diesel, gasoline, kerosene and many biodiesel grades. It is also compatible with ethanol blends and certain petroleum-based oils and solvents used in fueling operations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiesel, gasoline, kerosene and propane applications\u003c\/li\u003e\n  \u003cli\u003eBiodiesel: B-20 and up to E100\/B100 compatibility listed\u003c\/li\u003e\n  \u003cli\u003eEthanol blends including E10, E15, E85 supported\u003c\/li\u003e\n  \u003cli\u003eAccepts mineral spirits, oils, and some petroleum-based fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow flexible and easy to install is the 14-foot, 3\/4\" hose?\u003c\/h3\u003e\n\u003cp\u003eThe 3\/4\" ID and 14 ft length provide a good balance between flow capacity and maneuverability for most pump and tank setups. With a minimum bending radius of 220 mm it remains flexible in cold weather while resisting kinking during routine handling and connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSize: 3\/4\" (19 mm) ID; 28 mm OD for standard fittings\u003c\/li\u003e\n  \u003cli\u003eLength: 14 ft (4.3 m) fits tank-to-pump runs without extensions\u003c\/li\u003e\n  \u003cli\u003eMin. bending radius: 220 mm supports low-temperature use\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 212°F for season-long reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat safety and performance specs should I verify before use?\u003c\/h3\u003e\n\u003cp\u003eConfirm fittings and clamps match the 3\/4\" ID and pressure ratings of your system. Because the hose supports many fuel chemistries, check compatibility with any specialty fluids and use appropriate vapor recovery or grounding practices when dispensing flammable liquids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEnsure connectors match 3\/4\" ID hose and are rated for 150 PSI or higher\u003c\/li\u003e\n  \u003cli\u003eObserve local codes for grounding and vapor recovery during fueling\u003c\/li\u003e\n  \u003cli\u003eInspect hose for chafing or damage before each use to maintain safety\u003c\/li\u003e\n  \u003cli\u003eReplace if outer cover, braid, or inner tube shows wear or leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY 3\/4\" Fuel Transfer Hose (14 ft) is aimed at farmers, fleet operators, contractors and fueling professionals who need a rugged, fuel-compatible hose for onsite dispensing and tank transfers. It suits users who require a mid-length hose with high chemical compatibility and reliable pressure ratings for diesel, gasoline, biodiesel and common fuel blends. Choose this hose when you want a balance of flow capacity, flexibility in cold weather, and reinforced construction for demanding field use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for biodiesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The nitrile inner tube and reinforced construction are compatible with B-20 and many biodiesel blends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it handle winter temperatures?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Rated for -40°F to 212°F, it remains flexible and usable in cold conditions.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48079943434398,"sku":"B0DC63F84R","price":91.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-hose.jpg?v=1785776557","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-3-4-in-fuel-transfer-hose-14-ft-150-psi-nitrile-inner-with-stainless-steel-braid-for-diesel-and-gasoline","provider":"North Trail Auto","version":"1.0","type":"link"}