{"product_id":"evil-energy-3-8-transmission-cooler-hose-10-ft-sae-j1532-250-psi-nbr-cpe","title":"EVIL ENERGY 3\/8\" Transmission Cooler Hose 10 ft — SAE J1532, 250 PSI, NBR\/CPE","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 3\/8\" Transmission Cooler Hose is a 10-foot, SAE J1532-rated line designed to carry transmission, engine, hydraulic, and power steering fluids at working pressures up to 250 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis replacement or upgrade hose offers a balance of strength, flexibility and temperature tolerance for transmission and oil cooling systems. Built with an NBR inner tube, polyester reinforcement and a CPE outer cover, it meets SAE J1532 requirements and is sized to fit most 3\/8\" cooler line applications. The hose accommodates typical automotive cooling and steering fluids and is engineered to resist abrasion, heat and pressure cycling encountered in modern vehicles and equipment.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the exact dimensions and physical limits of this hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose has an inner diameter (ID) of 3\/8 inch (9.5 mm ±0.4 mm), an outer diameter (OD) of 0.63 inch (16 mm ±0.5 mm), and comes in a 10-foot length. It has a minimum bend radius of 5.03 inches (128 mm), which helps preserve flow and prevents kinking when routed through tight engine bays.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 3\/8\" (9.5 mm ±0.4 mm)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 0.63\" (16 mm ±0.5 mm)\u003c\/li\u003e\n  \u003cli\u003eLength: 10 ft (3.05 m)\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 5.03\" (128 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow strong and temperature-resistant is the EVIL ENERGY cooler hose?\u003c\/h3\u003e\n\u003cp\u003eThis hose is rated for a 250 PSI working pressure and a 1000 PSI burst pressure, delivering a safety margin for high-demand systems. It handles temperatures from -40°F up to 257°F, making it suitable for cold starts and high-heat environments near transmissions and engines.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 250 PSI\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 1000 PSI\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 257°F (-40°C to 125°C)\u003c\/li\u003e\n  \u003cli\u003eMeets SAE J1532 pressure and performance expectations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials are used and why do they matter for performance?\u003c\/h3\u003e\n\u003cp\u003eThe internal tube is NBR (nitrile rubber) for chemical compatibility with oils and fluids, while the reinforcement layer is polyester fiber to resist pressure and flexing. A CPE (chlorinated polyethylene) outer cover protects against abrasion, ozone and engine-bay contaminants, extending service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner: NBR — resists transmission, engine and hydraulic oils\u003c\/li\u003e\n  \u003cli\u003eReinforcement: polyester fiber — improves burst and flex strength\u003c\/li\u003e\n  \u003cli\u003eOuter: CPE — resists abrasion, ozone and environmental wear\u003c\/li\u003e\n  \u003cli\u003eConstruction designed to maintain flexibility and durability under cycling loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this hose fit my clamps and typical vehicle connections?\u003c\/h3\u003e\n\u003cp\u003eThe hose fits common clamp sizes for 16–25 mm diameter fittings, covering most aftermarket and OEM clamp ranges for 3\/8\" lines. Its OD and flexibility make it compatible with standard hose ends, fittings and cooler assemblies used in transmission and oil cooling setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClamp compatibility: 16–25 mm diameter clamps\u003c\/li\u003e\n  \u003cli\u003eDesigned for standard 3\/8\" cooler fittings and connections\u003c\/li\u003e\n  \u003cli\u003eEases routing in tight spaces thanks to controlled bend radius\u003c\/li\u003e\n  \u003cli\u003eSuitable for use with transmission fluid, engine oil, hydraulic oil and power steering fluid\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY 3\/8\" Transmission Cooler Hose is intended for mechanics, DIY enthusiasts and fleet maintenance teams needing a robust replacement hose for transmission coolers, oil coolers and power steering circuits. It suits vehicles and equipment that require SAE J1532-level performance, chemical compatibility with automotive oils, and a durable hose that tolerates heat, pressure and routing constraints.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for transmission fluid and power steering fluid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The NBR inner tube is compatible with transmission, engine, hydraulic and power steering fluids per SAE J1532 materials guidance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I reuse my existing clamps with this hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Typically yes; the hose fits 16–25 mm clamp diameters used on most 3\/8\" cooler connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48086541598878,"sku":"B0FQ54RXGZ","price":46.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-3-8-transmission-hose.jpg?v=1785900289","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-3-8-transmission-cooler-hose-10-ft-sae-j1532-250-psi-nbr-cpe","provider":"North Trail Auto","version":"1.0","type":"link"}