{"product_id":"evil-energy-3-8-transmission-oil-cooler-hose-10ft-250-psi-cpe-40-f-to-257-f","title":"EVIL ENERGY 3\/8\" Transmission Oil Cooler Hose 10ft — 250 PSI CPE, -40°F to 257°F","description":"\u003cstrong\u003eEVIL ENERGY 3\/8\" Transmission Oil Cooler Hose is a 10-foot, CPE-built hose rated for 250 PSI working pressure that links transmission to oil cooler with heat and oil resistance.\u003c\/strong\u003e\n\n\u003cp\u003eThis hose is engineered to provide a durable, flexible connection between an oil cooler and transmission or other fluid systems. Built from chlorinated polyethylene (CPE), it balances chemical resistance and temperature tolerance for automotive and light industrial uses. The 3\/8\" inner diameter and 10-foot length make it suitable for many retrofit and replacement needs while meeting SAE-style performance expectations.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the key performance specifications of this hose?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY hose delivers clear technical limits so you can match it to your system. It has a reliable working pressure range and a wide temperature tolerance for varied environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 3\/8 inch (9.5 mm)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 0.63 inch (16 mm)\u003c\/li\u003e\n  \u003cli\u003eLength: 10 feet (3.05 m)\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: 250 PSI; burst pressure: 1000 PSI\u003c\/li\u003e\n  \u003cli\u003eTemperature rating: -40°F to 257°F (-40°C to 125°C)\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 85.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and applications is the hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThis hose is formulated to resist oils and certain chemicals used in automotive drivetrains and hydraulic systems. It is suitable as a connecting line for transmission coolers and can carry several common fluids, although always verify compatibility with specialty fluids before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for transmission fluid and engine oil\u003c\/li\u003e\n  \u003cli\u003eAccepts many hydraulic fluids and lubricants\u003c\/li\u003e\n  \u003cli\u003eCan convey some gaseous media in non-pressurized or low-pressure uses\u003c\/li\u003e\n  \u003cli\u003eIntended as the link between oil cooler and transmission or pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and flexible is the CPE construction?\u003c\/h3\u003e\n\u003cp\u003eCPE delivers a balance of toughness and pliability, resisting heat, oil soak, and environmental aging. The hose’s rated bend radius and temperature window make routing through engine bays and tight assemblies practical without sacrificing strength.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCPE material resists oil absorption and heat-related degradation\u003c\/li\u003e\n  \u003cli\u003eWide operating temperature range for cold starts and hot running\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius prevents kinking when routed correctly\u003c\/li\u003e\n  \u003cli\u003eHigh burst pressure adds a safety margin under pressure spikes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this transmission cooler hose?\u003c\/h3\u003e\n\u003cp\u003eProper installation and routine checks extend service life and reduce leak risks. Use appropriate clamps, avoid sharp bends, and inspect for abrasion or hardening at intervals.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut squarely and deburr ends before attaching fittings or clamps\u003c\/li\u003e\n  \u003cli\u003eUse compatible crimp or screw-type clamps rated for oil lines\u003c\/li\u003e\n  \u003cli\u003eAvoid routing across sharp edges; protect with sleeves if needed\u003c\/li\u003e\n  \u003cli\u003eInspect periodically for soft spots, cracking, or swelling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this product is for: Mechanics, performance hobbyists, and fleet technicians who need a dependable replacement or custom-length connecting hose for transmission oil coolers will find this EVIL ENERGY hose useful. It fits installations that require a 3\/8\" ID, moderate pressure capacity, and resistance to heat and oils—common in aftermarket cooling setups, repair shops, and do-it-yourself vehicle maintenance projects. For specialized fluids or higher-pressure systems, confirm compatibility or consider hoses with different materials or higher ratings.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for high-temperature transmission fluid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE hose is rated from -40°F to 257°F, suitable for typical transmission operating temperatures.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose for hydraulic fluid?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Generally yes—it's compatible with many hydraulic fluids and lubricants, but verify with your fluid manufacturer for specialty fluids.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48083835617438,"sku":"B0BGCGBM78","price":50.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-hose-front-view_820334a7-9717-4771-8284-a2871cbcb801.jpg?v=1785836911","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-3-8-transmission-oil-cooler-hose-10ft-250-psi-cpe-40-f-to-257-f","provider":"North Trail Auto","version":"1.0","type":"link"}