{"product_id":"evil-energy-300-lph-external-inline-fuel-pump-kit-for-12v-efi-10ft-6an-hose-aluminum-fittings-high-flow-75-psi","title":"EVIL ENERGY 300 LPH External Inline Fuel Pump Kit for 12V EFI — 10ft 6AN Hose \u0026 Aluminum Fittings, High-Flow 75 PSI","description":"\u003cstrong\u003eEVIL ENERGY's External Inline Fuel Pump Kit is a 300 LPH high-flow 12V electric pump system packaged with a 10 ft 6AN fuel line and aluminum fittings for reliable fuel delivery on EFI engines.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit combines a high-capacity inline electric pump with reinforced fuel hose and lightweight aluminum fittings to upgrade or replace stock fuel delivery for gasoline and diesel 12V EFI setups. Designed for consistent flow under a range of operating voltages and pressures, it aims to stabilize fuel supply for improved throttle response and reduced risk of starvation during higher-demand driving. The package has been assembled for hobbyists and professional mechanics who need a straightforward external pump solution that installs beneath the tank and connects with 6AN fittings.\u003c\/p\u003e\n\n\u003ch3\u003eHow much fuel flow and pressure can I expect from this pump?\u003c\/h3\u003e\n\u003cp\u003eThe pump is rated across a range of test conditions: approximately 200 LPH at 75 PSI and 12V, 255 LPH at 43 PSI and 12V, and up to 300 LPH at 43 PSI and 13.5V. It is intended for systems operating near these voltages and pressures, delivering steady volume for many EFI setups without internal tank mounting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTest results: 200–300 LPH depending on voltage and pressure.\u003c\/li\u003e\n  \u003cli\u003eOperating pressure specified around 75 PSI maximum.\u003c\/li\u003e\n  \u003cli\u003ePerforms best when mounted lower than the tank for gravity assistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and hoses are included, and are they durable?\u003c\/h3\u003e\n\u003cp\u003eThe included 6AN fuel line uses a CPE rubber inner tube, reinforced with 304 stainless-steel wire and finished with a tough nylon braid to resist abrasion and kinking. Fittings are aluminum for corrosion resistance and lightweight handling, chosen to balance durability and ease of installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCPE inner tube for chemical compatibility with gasoline and diesel.\u003c\/li\u003e\n  \u003cli\u003e304 stainless-steel wire reinforcement for pressure stability.\u003c\/li\u003e\n  \u003cli\u003eNylon outer braid and aluminum fittings minimize weight and corrosion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this pump compatible with my vehicle and how should it be installed?\u003c\/h3\u003e\n\u003cp\u003eThe pump supports 12V DC EFI systems and is suitable for both gasoline and diesel applications where an external inline pump is desired. For best reliability and priming, mount the pump below the fuel tank so it benefits from gravity feed; the kit includes the necessary aluminum fittings and instructions to facilitate a secure connection.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 12V EFI gasoline and diesel systems.\u003c\/li\u003e\n  \u003cli\u003eRecommended mounting: below tank to help with fuel supply and reduce cavitation.\u003c\/li\u003e\n  \u003cli\u003eKit includes fittings and a 10 ft 6AN hose for common routing needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat operating temperatures and environmental limits should I be aware of?\u003c\/h3\u003e\n\u003cp\u003eThis pump is engineered to run across a wide temperature range, from extreme cold to high-heat environments, supporting operation from about -68°F to 194°F. Those limits make it suitable for many climates, though attention to heat sources and routing will extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating temperature: -68°F to 194°F.\u003c\/li\u003e\n  \u003cli\u003eUse heat shielding or routing away from exhaust or manifolds where possible.\u003c\/li\u003e\n  \u003cli\u003eConfirm wiring and fuse protection per installation instructions to prevent electrical stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This EVIL ENERGY External Inline Fuel Pump Kit is aimed at car enthusiasts upgrading to a higher-flow external pump, builders of custom EFI projects, and mechanics needing a dependable replacement pump with long hose runs. It suits anyone who wants a ready-to-install high-flow inline pump assembly with reinforced 6AN fuel line and corrosion-resistant fittings, especially where tank-mounted pumps are impractical or when supplemental flow is required for performance applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this pump run on both gasoline and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The pump and CPE-lined 6AN hose are compatible with gasoline and diesel in 12V EFI systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Where should I mount the inline pump for best performance?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Mount it below the fuel tank to take advantage of gravity feed and reduce the chance of cavitation.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48079955722398,"sku":"B0FPWP8JXC","price":129.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging.jpg?v=1785777058","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-300-lph-external-inline-fuel-pump-kit-for-12v-efi-10ft-6an-hose-aluminum-fittings-high-flow-75-psi","provider":"North Trail Auto","version":"1.0","type":"link"}