{"product_id":"evil-energy-5-16-fuel-hose-nbr-rubber-sae-30r7-10ft-300-psi-oil-resistant","title":"EVIL ENERGY 5\/16\" Fuel Hose NBR Rubber SAE 30R7 10ft — 300 PSI, Oil-Resistant","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's 5\/16\" NBR fuel hose is a SAE 30R7–rated, oil-resistant rubber line supplied in a 10-foot length and engineered for up to 300 PSI working pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis fuel hose combines nitrile butadiene rubber (NBR) with a braided polyester reinforcement to deliver chemical resistance, abrasion durability and consistent performance across a wide temperature range. Sized with a 5\/16\" (8 mm) inner diameter and a 9\/16\" (14 mm) outer diameter, the hose is built to meet SAE 30R7 specifications and suit fuel, diesel, gasoline, biodiesel and oil-handling applications where flexibility and reliability matter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the key technical specifications of this 5\/16\" fuel hose?\u003c\/h3\u003e\n\u003cp\u003eThe hose is designed with clear dimensional and pressure ratings so you can confirm fit and safety before installation. Its construction and limits suit many common fuel-system tasks without over-specifying for simple runs.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 5\/16\" (8 mm); outer diameter: 9\/16\" (14 mm).\u003c\/li\u003e\n  \u003cli\u003eWall thickness approximately 4 mm; minimum bend radius 3.14\" (80 mm).\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: 300 PSI; burst pressure: 1200 PSI.\u003c\/li\u003e\n  \u003cli\u003eTemperature tolerance: −40°F to 257°F (−40°C to 125°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and environments is this hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe NBR elastomer and polyester braid provide good resistance to oils and fuels commonly used in engines and industrial equipment. It is intended for fuel, diesel, gasoline and biodiesel as well as some greases and oil-carrying lines, but confirm chemical compatibility for specialty fluids.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for gasoline, diesel, biodiesel, and many oil-based fluids.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for concentrated solvents or certain aggressive chemicals—verify if unsure.\u003c\/li\u003e\n  \u003cli\u003eWorks in hot engine compartments and cold-start conditions across its rated temperature span.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the hose perform during installation and routine use?\u003c\/h3\u003e\n\u003cp\u003eIts 10-foot length and flexible NBR construction make routing straightforward in tight engine bays or equipment compartments. The braided polyester reinforcement keeps the hose dimensionally stable under pressure and reduces kinking risk at bends above the minimum radius.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e10-foot length ready for cutter-and-fit installations; cut to custom lengths as needed.\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius 3.14\" (80 mm) to avoid deformation or flow restriction.\u003c\/li\u003e\n  \u003cli\u003eBraided reinforcement improves crush and abrasion resistance for long-term service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes this product meet industry standards and where is it commonly used?\u003c\/h3\u003e\n\u003cp\u003eThe hose is produced to meet SAE 30R7 expectations, a widely recognized standard for fuel and oil lines, and is used across automotive, marine, small engine and industrial equipment applications. Use correct clamps and fittings rated for fuel systems when installing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured to SAE 30R7-style construction for fuel and oil system use.\u003c\/li\u003e\n  \u003cli\u003eTypical uses: fuel lines, oil cooling connections, steam emission piping within spec limits.\u003c\/li\u003e\n  \u003cli\u003eInstall with fuel-rated clamps and compatible fittings to maintain pressure integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? EVIL ENERGY's 5\/16\" NBR fuel hose is suited for mechanics, repair shops, enthusiasts and equipment builders needing a dependable, oil-resistant fuel line in a 10-foot roll. Choose this hose when you require clear pressure ratings, compatibility with common fuels, and a flexible, reinforced profile for straightforward routing and reliable performance.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose handle diesel and gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The NBR construction is compatible with diesel, gasoline and many oil-based fuels—confirm specialty fluids before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What's the maximum working pressure for this hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose has a 300 PSI working pressure and a 1200 PSI burst pressure for safety margin.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48087276126366,"sku":"B097HDNLRM","price":39.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-5-16-fuel-hose.jpg?v=1785920078","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-5-16-fuel-hose-nbr-rubber-sae-30r7-10ft-300-psi-oil-resistant","provider":"North Trail Auto","version":"1.0","type":"link"}