{"product_id":"evil-energy-5-16-transmission-oil-cooler-4-pass-aluminum-tube-and-fin-black-compact-kit","title":"EVIL ENERGY 5\/16\" Transmission Oil Cooler — 4-Pass Aluminum Tube-and-Fin, Black Compact Kit","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's 5\/16\" transmission oil cooler kit is a compact, universal 4-pass aluminum tube-and-fin cooler designed to lower automatic transmission fluid temperatures for improved heat management in most vehicles with 5\/16\" ID lines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact cooler kit combines a lightweight aluminum tube-and-fin core with durable CPE hose and a black finish to offer a practical way to add extra cooling capacity to cars, trucks and SUVs. At 15.66\" × 5\" × 0.75\", the cooler is small enough to fit tight spaces yet built to handle the pressures and temperatures associated with transmission service. The kit includes mounting hardware and step-by-step instructions so you can position it where airflow is best—usually behind the grille or in front of the radiator—for maximum effect.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this cooler reduce transmission fluid temperature?\u003c\/h3\u003e\n\u003cp\u003eThe cooler uses a four-pass tube-and-fin design that increases the fluid’s exposure to cooling surfaces and airflow. As ATF moves through the internal tubes, heat transfers to the fins and then to the surrounding air, lowering the fluid temperature before it returns to the transmission. Cooler fluid helps the transmission operate closer to intended temperatures and can help reduce thermal strain during heavy towing or stop-and-go driving.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e4-pass tube-and-fin core improves heat exchange efficiency\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy core conducts heat quickly and resists corrosion\u003c\/li\u003e\n  \u003cli\u003eCompact footprint allows placement in high-airflow locations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my vehicle and plumbing setup?\u003c\/h3\u003e\n\u003cp\u003eThis EVIL ENERGY cooler is built for systems that use 5\/16\" (ID) transmission cooler lines, making it compatible with many cars and light trucks. Always measure your vehicle’s cooler line inner diameter and confirm there is adequate clearance where you plan to mount the cooler. The kit is universal—not vehicle-specific—so check hose routing and space before ordering.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 5\/16\" inside-diameter ATF lines\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions: 15.66\" × 5\" × 0.75\" for tight installs\u003c\/li\u003e\n  \u003cli\u003eIncludes hoses and mounting hardware (verify fit before cutting lines)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and durability specs should I expect?\u003c\/h3\u003e\n\u003cp\u003eThe cooler core is aluminum alloy for rapid heat transfer and light weight, while the included hoses are made of chlorinated polyethylene (CPE) formulated for fluid systems. The hose is rated for a working pressure of 145 PSI with a bursting pressure listed at 900 PSI, and it withstands temperatures from -40°F to 257°F for dependable service in varied climates.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCore: corrosion-resistant aluminum alloy, black finish\u003c\/li\u003e\n  \u003cli\u003eHose: CPE material; working pressure 145 PSI, burst 900 PSI\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 257°F for wide operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow difficult is installation and where should I mount it?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward for anyone comfortable with basic automotive plumbing and hand tools. The kit includes instructions and mounting hardware; plan to mount the cooler where it receives the most unobstructed airflow — typically in front of the radiator or behind the grille. Secure hoses away from hot exhaust components and sharp edges to ensure long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes clear installation instructions and mounting hardware\u003c\/li\u003e\n  \u003cli\u003eBest mounted in high-airflow locations for optimal cooling\u003c\/li\u003e\n  \u003cli\u003eAvoid routing hoses near exhaust and moving parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this cooler is for: drivers who need a compact, universal transmission oil cooler to help manage ATF temperatures—especially owners of tow-capable cars, light trucks, and vehicles frequently used in heavy traffic or hot climates. It’s also a practical aftermarket upgrade for anyone wanting an affordable, easy-to-install oil cooler solution that fits tight spaces without requiring vehicle-specific plumbing adapters.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this cooler work with my transmission lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits systems with 5\/16\" inner-diameter ATF lines—measure your lines and confirm clearance before installing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the hoses handle high temperature and pressure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE hoses work from -40°F to 257°F, with a 145 PSI working pressure and 900 PSI burst rating.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48083177799838,"sku":"B081YNV8FN","price":50.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-view-cooler-installed.jpg?v=1785827817","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-5-16-transmission-oil-cooler-4-pass-aluminum-tube-and-fin-black-compact-kit","provider":"North Trail Auto","version":"1.0","type":"link"}