{"product_id":"evil-energy-6an-90-ptfe-hose-end-fittings-black-4pcs-6061-t6-aluminum-1500-psi-360-swivel","title":"EVIL ENERGY 6AN 90° PTFE Hose End Fittings Black 4PCS — 6061-T6 Aluminum, 1500 PSI, 360° Swivel","description":"\u003cb\u003eEVIL ENERGY 6AN 90° PTFE Hose End Fitting is a four-piece set of black 90-degree aluminum hose ends designed exclusively for PTFE fuel lines.\u003c\/b\u003e\n\n\u003cp\u003eThis kit gives you compact, high-pressure 6AN connections for PTFE hoses where a tight 90° turn is needed. Machined from 6061-T6 aluminum with a 37° AN sealing face and a 360° swivel collar, these fittings are built to mate with PTFE-lined hose assemblies for fuel, oil, and related fluid-routing applications. The fittings accept a 6AN thread (9\/16-18UNF) and are rated to 1500 PSI, operating across a wide temperature span from -65°F to 252°F.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these fittings attach to PTFE hose and what makes them leak-resistant?\u003c\/h3\u003e\n\u003cp\u003eThese hose ends are made specifically for PTFE-lined hose and use the AN 37° sealing angle to create a metal-to-metal seat, reducing the need for additional washers. The swivel collar allows you to align the hose without twisting the PTFE braid or liner during assembly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned only for PTFE hose — prevents mismatched sealing failures\u003c\/li\u003e\n  \u003cli\u003e37° AN sealing face for reliable seat and pressure integrity\u003c\/li\u003e\n  \u003cli\u003e360° swivel collar eases installation and alignment\u003c\/li\u003e\n  \u003cli\u003eThread standard: 6AN (9\/16-18UNF) for consistent compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these survive demanding pressure and temperature conditions?\u003c\/h3\u003e\n\u003cp\u003eThe fittings are rated to a working pressure of 1500 PSI and cover a broad temperature range, making them suitable for many automotive and industrial fluid systems. Their 6061-T6 aluminum construction balances strength and corrosion resistance while keeping weight low.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 1500 PSI suitable for many fuel and oil systems\u003c\/li\u003e\n  \u003cli\u003eTemperature tolerance: -65°F to 252°F for hot and cold environments\u003c\/li\u003e\n  \u003cli\u003e6061-T6 aluminum provides a good strength-to-weight ratio\u003c\/li\u003e\n  \u003cli\u003eBlack finish reduces glare and blends with engine bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I check before buying to ensure compatibility?\u003c\/h3\u003e\n\u003cp\u003eConfirm your hose is PTFE-lined and sized for a 6AN fitting; these ends are not compatible with non-PTFE hoses or mismatched AN sizes. Also verify the threaded port uses a 9\/16-18UNF (6AN) female receptacle and that a 90° orientation works within your routing constraints.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse only with PTFE-lined hose to avoid sealing issues\u003c\/li\u003e\n  \u003cli\u003eThread spec: 6AN (9\/16-18UNF) — ensure port matches\u003c\/li\u003e\n  \u003cli\u003eAllow clearance for a 90° fitting in tight engine spaces\u003c\/li\u003e\n  \u003cli\u003eCheck system pressure requirements against 1500 PSI rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the 360° swivel help during installation?\u003c\/h3\u003e\n\u003cp\u003eThe swivel collar enables final hose alignment without rotating the hose body, preventing stress on the PTFE liner and the braided cover. This makes it easier to install in confined areas and helps maintain the integrity of the hose assembly over time.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePrevents liner twisting during tightening\u003c\/li\u003e\n  \u003cli\u003eSpeeds up alignment in cramped engine bays\u003c\/li\u003e\n  \u003cli\u003eReduces rework risk and potential hose damage\u003c\/li\u003e\n  \u003cli\u003eAllows fine adjustment after torquing the nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: These EVIL ENERGY 6AN 90° hose ends are aimed at mechanics, fabricators, and automotive enthusiasts building or repairing PTFE-lined fuel or oil lines who need a compact right-angle solution. Choose this 4-piece black set when you require AN-standard sealing, a 360° swivel for easy installation, and a lightweight aluminum option rated for common high-pressure applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use these fittings with braided non-PTFE hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. These 6AN ends are designed only for PTFE-lined hose; using non-PTFE hose may prevent proper sealing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thread size and pressure rating do these fittings have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They use 6AN (9\/16-18UNF) threads and are rated for a working pressure of 1500 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48086398501022,"sku":"B0CJ92RQNN","price":48.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-6an-90deg-front-view.jpg?v=1785897482","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-6an-90-ptfe-hose-end-fittings-black-4pcs-6061-t6-aluminum-1500-psi-360-swivel","provider":"North Trail Auto","version":"1.0","type":"link"}