{"product_id":"evil-energy-6an-fuel-line-kit-10ft-nylon-braided-hose-with-6-swivel-aluminum-fittings-cpe-core-750-psi-working-pressure","title":"EVIL ENERGY 6AN Fuel Line Kit 10ft Nylon-Braided Hose with 6 Swivel Aluminum Fittings — CPE Core, 750 psi Working Pressure","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 6AN Fuel Line Kit is a 10-foot, nylon-braided fuel hose system with six swivel aluminum fittings and clamps designed for high-pressure automotive fuel, oil, and fluid routing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis complete 6AN hose and fitting set offers a durable, flexible route for fuel supply, return lines, oil feed, transmission cooler connections, vacuum lines and other fluid jobs where a compact, high-pressure hose is required. Built with a CPE rubber inner tube, 304 stainless steel wire and a nylon outer braid, the assembly balances abrasion resistance, crush resistance and flexibility for shop or race use. The kit includes angled swivel ends, inline adapters and mounting hardware so you can assemble a custom-length run up to 10 feet without hunting down extra parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat components come with this kit and what are their materials?\u003c\/h3\u003e\n\u003cp\u003eThe set contains a 10-foot length of 6AN braided fuel hose, six swivel hose ends (two straight, two 45° and two 90°), two hose separator clamps, and two 6AN-to-6AN adapters. Fittings are machined from aluminum alloy for light weight and corrosion resistance, while the hose core is CPE rubber reinforced by 304 stainless steel wire and a nylon outer braid.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHose length: 10 ft (120 in). Inner diameter: 0.31\". Outer diameter: 0.56\".\u003c\/li\u003e\n  \u003cli\u003eFittings: 6 pieces (2 straight, 2 × 45°, 2 × 90° swivel).\u003c\/li\u003e\n  \u003cli\u003eMounting: 2 hose separator clamps included.\u003c\/li\u003e\n  \u003cli\u003eMaterials: CPE inner, 304 SS wire, nylon braid, aluminum alloy fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow much pressure and temperature can the hose handle?\u003c\/h3\u003e\n\u003cp\u003eThis 6AN braided hose is rated for a maximum working pressure of 750 psi and a burst pressure up to 2250 psi, making it appropriate for many fuel and oil system applications. The operating temperature range spans -22°F to 248°F, covering most automotive and motorsport environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 750 psi.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 2250 psi for safety margin.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F.\u003c\/li\u003e\n  \u003cli\u003eSuitable for gasoline, diesel, race gas, oil, hydraulic and coolant lines (see manufacturer compatibility guidance).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and installations are compatible with this 6AN fuel line?\u003c\/h3\u003e\n\u003cp\u003eThe hose construction and fittings are compatible with a wide set of automotive fluids, including gasoline, diesel, race fuels, transmission fluid, engine oil, hydraulic fluid and coolant in many lightweight routing applications. Avoid prolonged exposure to aggressive chemical solvents not specified by the manufacturer; when in doubt, test a short sample or consult EVIL ENERGY technical guidance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon uses: fuel supply\/return, oil feed, transmission cooler lines, vacuum lines and fuel gauge lines.\u003c\/li\u003e\n  \u003cli\u003eFuel types: gasoline, diesel, race gas (verify with fuel type and additives).\u003c\/li\u003e\n  \u003cli\u003eOther fluids: transmission fluid, coolant, hydraulic fluids where chemical compatibility is acceptable.\u003c\/li\u003e\n  \u003cli\u003eNot recommended for unknown corrosive chemicals or pressurized air systems without verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I assemble and secure the fittings for leak-free performance?\u003c\/h3\u003e\n\u003cp\u003eCut the hose squarely, push the hose end into the swivel fitting until fully seated, and tighten according to the fitting manufacturer’s torque guidelines. Use the included separator clamps to prevent chafe and to route runs away from heat or moving parts; always test the assembled line at low pressure before final use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim hose cleanly with a fine-tooth blade for a square cut.\u003c\/li\u003e\n  \u003cli\u003eLubricate fitting bore slightly if needed for easier assembly (compatible lubricant only).\u003c\/li\u003e\n  \u003cli\u003eTighten swivel fittings to specified torque; inspect for leaks at low pressure first.\u003c\/li\u003e\n  \u003cli\u003eClamp and secure lines with the supplied separators to avoid rubbing and kinking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: This EVIL ENERGY 6AN Fuel Line Kit is aimed at mechanics, fabricators, racers and DIY car enthusiasts who need a flexible, high-pressure hose solution for custom fluid routing. It’s well suited for performance builds, retrofit projects, and maintenance tasks where light-weight aluminum fittings and a reinforced braided hose provide reliability and neat installation. If you require factory-certified compatibility for a specific chemical or a higher temperature rating, confirm with product specifications or consult a specialist before installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with gasoline and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—this 6AN hose is compatible with gasoline and diesel, including race fuels; verify additives and test if unsure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this for transmission cooler or oil feed lines?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—the kit suits transmission cooler lines and oil feed duties within the stated pressure and temperature limits.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48079886516382,"sku":"B0D83RLSWB","price":72.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-6an-fuel-line-kit_0a9f9f77-86a8-4ee4-9b39-b7b04de26e09.jpg?v=1785774448","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-6an-fuel-line-kit-10ft-nylon-braided-hose-with-6-swivel-aluminum-fittings-cpe-core-750-psi-working-pressure","provider":"North Trail Auto","version":"1.0","type":"link"}