{"product_id":"evil-energy-6an-fuel-line-kit-16ft-black-nylon-braided-hose-with-swivel-ends-750-psi-working-pressure","title":"EVIL ENERGY 6AN Fuel Line Kit — 16ft Black Nylon-Braided Hose with Swivel Ends, 750 psi Working Pressure","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 6AN Fuel Line Kit is a complete 16-foot nylon-braided 6AN hose and fitting set designed to handle fuel, oil and coolant lines with high-pressure reliability.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for performance garages, racecars and customized vehicles, this kit combines a CPE rubber inner tube with 304 stainless steel reinforcement and an external nylon braid to balance flexibility, abrasion resistance and chemical compatibility. The package includes swivel hose ends in multiple angles, clamps and adapter fittings so you can route supply, return or accessory lines cleanly without hunting for separate components.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this 6AN fuel hose under pressure and heat?\u003c\/h3\u003e\n\u003cp\u003eThe hose is rated for a maximum working pressure of 750 psi and a burst pressure around 2250 psi, giving a strong safety margin for most automotive and light industrial uses. Its operating temperature range spans from -22°F to 248°F, making it suitable across cold starts and warm running conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum working pressure: 750 psi\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: approximately 2250 psi\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F\u003c\/li\u003e\n  \u003cli\u003eReinforced with 304 stainless steel wire for abrasion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fluids and systems can this kit be used with?\u003c\/h3\u003e\n\u003cp\u003eThe CPE inner tube plus stainless and nylon layers accept a wide variety of fluids typical in automotive and motorsport setups. You can use it for fuel supply and return, transmission cooler lines, oil feed, vacuum connections and many coolant or hydraulic duties—check compatibility with specialty fuels before use.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible: gasoline, diesel, transmission fluid, engine oil, coolant, vacuum and hydraulic fluids\u003c\/li\u003e\n  \u003cli\u003eCommon uses: fuel return\/supply, turbo cooler lines, oil feed, transmission cooler\u003c\/li\u003e\n  \u003cli\u003eAvoid prolonged exposure to unknown aggressive chemicals without testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and accessories are included in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives ready to install with a selection of aluminum swivel hose ends, hose separators and adapters so you can route lines neatly and tighten without twisting the hose. Multiple angle fittings let you create clean runs in tight engine bays and chassis locations.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e16 feet of 6AN braided hose (ID 0.31\" \/ OD 0.56\")\u003c\/li\u003e\n  \u003cli\u003e10 swivel hose ends: 4 straight, 2 x 45°, 2 x 90°, 2 x 180°\u003c\/li\u003e\n  \u003cli\u003e6 hose separator clamps and 2 AN-to-6AN adapter fittings\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy fittings for lightweight corrosion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and route in a vehicle?\u003c\/h3\u003e\n\u003cp\u003ePre-braided hose with swivel ends simplifies routing because fittings rotate independently while tightening, reducing stress on the hose. The included separator clamps and multiple angled fittings make tidy, secure installations possible without sourcing extra hardware.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSwivel ends reduce hose twist during installation\u003c\/li\u003e\n  \u003cli\u003eSeparator clamps keep runs organized and vibration-reduced\u003c\/li\u003e\n  \u003cli\u003eCommon AN sizing fits standard AN-compatible ports and adaptors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The EVIL ENERGY 6AN Fuel Line Kit is aimed at mechanics, fabricators and enthusiasts who want a ready-made, rugged hose-and-fitting solution for fuel systems, oil feeds, cooler lines and other under-hood plumbing. If you build or service racecars, off-road rigs or modified street vehicles and need flexible, reinforced AN plumbing that handles common automotive fluids and temperatures, this kit gives the parts needed for a neat, durable installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this 6AN hose compatible with race fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The CPE inner tube accepts many fuels, but always verify compatibility with specific race additives before prolonged use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut and assemble the hose myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — the kit contains swivel ends and fittings meant for field assembly; use proper AN crimping or tightening procedures.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48079874916510,"sku":"B0CQK3G9JP","price":93.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-6an-fuel-line-kit.jpg?v=1785773851","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-6an-fuel-line-kit-16ft-black-nylon-braided-hose-with-swivel-ends-750-psi-working-pressure","provider":"North Trail Auto","version":"1.0","type":"link"}