{"product_id":"evil-energy-6an-fuel-line-kit-25ft-black-cpe-nylon-braided-hose-with-10-swivel-fittings-750-psi","title":"EVIL ENERGY 6AN Fuel Line Kit 25ft Black — CPE Nylon-Braided Hose with 10 Swivel Fittings, 750 psi","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 6AN Fuel Line Kit is a complete 25-foot CPE nylon-braided hose system with ten 6AN swivel fittings designed for durable, high-pressure fluid routing in automotive and racing applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis kit delivers a ready-to-install solution for fuel, oil, coolant and other fluid lines where flexibility, abrasion resistance and reliable connections matter. The hose combines a CPE rubber core with a 304 stainless wire layer and a nylon outer braid for strength, while the anodized aluminum 6AN fittings provide swivel ends in multiple angles to simplify routing. Rated for a 750 psi working pressure and a wide temperature range, it covers many aftermarket plumbing needs from fuel supply to turbo cooling lines.\u003c\/p\u003e\n\n\u003ch3\u003eHow robust is the hose for high-pressure or racing environments?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose is engineered to tolerate demanding conditions: a maximum working pressure of 750 psi and a burst pressure near 2250 psi offer a large safety margin for most automotive uses. The combination of a CPE inner tube, stainless steel reinforcement and nylon braid balances flexibility with resistance to kinking and abrasion. Temperature performance spans from -22°F up to 248°F, making it suitable for cold starts and hot engine bays.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 750 psi for sustained use.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 2250 psi safety threshold.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F for varied climates.\u003c\/li\u003e\n  \u003cli\u003eConstruction: CPE core, 304 stainless wire, nylon outer braid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems can this 6AN kit handle?\u003c\/h3\u003e\n\n\u003cp\u003eThis assembly is compatible with a broad range of automotive fluids including gasoline (race and pump), diesel, transmission fluid, engine oil, hydraulic fluid, coolant and vacuum lines for gauges or boost systems. The materials were selected to resist chemical attack common to fuel and lubricants while preserving flexibility. However, always confirm compatibility with specialty chemicals before long-term use.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSuitable for: fuel supply, fuel return, oil feed, transmission cooler and turbo cooler lines.\u003c\/li\u003e\n  \u003cli\u003eCompatible with race gas, diesel, transmission fluid, oil and hydraulic fluids.\u003c\/li\u003e\n  \u003cli\u003eAlso works for vacuum lines and fuel gauge lines.\u003c\/li\u003e\n  \u003cli\u003eNot intended for unknown aggressive chemicals without verification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fittings and lengths are included — how does installation look?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit includes 25 feet of 6AN hose (0.31\" inner diameter, 0.56\" outer diameter) plus ten swivel aluminum 6AN hose ends and two clamp separators to tidy runs. Fittings are provided in straight, 45°, 90° and 180° swivel styles to minimize twisting during tightening and to ease routing in tight spaces. With the included fittings and separators you can build multiple runs or replace damaged lines without sourcing extra parts.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHose length: 25 feet, ID 0.31\" \/ OD 0.56\" for versatile routing.\u003c\/li\u003e\n  \u003cli\u003eFittings: 10pcs 6AN swivel ends (4 straight, 2×45°, 2×90°, 2×180°).\u003c\/li\u003e\n  \u003cli\u003eExtras: 2 hose separator clamps to secure parallel lines.\u003c\/li\u003e\n  \u003cli\u003eFittings made from lightweight aluminum alloy for corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I maintain and protect these lines for long life?\u003c\/h3\u003e\n\n\u003cp\u003eKeep the braided hose free of chafing and avoid sharp edges that can abrade the nylon braid. Inspect fittings and hose runs periodically for leaks, hardening, or compression near clamps; re-torque fittings after initial heat cycles. Replace any section that shows swelling, cracking, or fuel smell to maintain safety and reliability.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInspect regularly for abrasion and leaks, especially after first heat cycles.\u003c\/li\u003e\n  \u003cli\u003eUse provided separators and proper clamps to prevent chafing on metal parts.\u003c\/li\u003e\n  \u003cli\u003eAvoid contact with extreme heat sources; route away from exhaust where possible.\u003c\/li\u003e\n  \u003cli\u003eReplace sections showing damage rather than attempting patch repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This EVIL ENERGY 6AN Fuel Line Kit suits performance tuners, race teams, and DIY mechanics who need a durable, flexible 25-foot solution for fuel, oil, transmission cooler or vacuum lines. It’s ideal for projects requiring multiple fittings and varied swivel angles—such as custom fuel systems, turbo plumbing, or transmission cooler reroutes—where dependable pressure ratings and corrosion-resistant materials are essential. If you require certified plumbing for specialized chemicals or aviation use, confirm suitability with the fluid manufacturer before installing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this 6AN hose safe for gasoline and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the CPE core and stainless\/nylon braid are compatible with gasoline and diesel, including many race fuels. Verify with specific additives before prolonged exposure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut the hose to length and reuse fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes; the hose can be cut to size and fitted with the included 6AN swivel ends. Ensure clean cuts and proper assembly for leak-free seals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48080726098078,"sku":"B0D83M822S","price":118.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-6an-kit.jpg?v=1785784432","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-6an-fuel-line-kit-25ft-black-cpe-nylon-braided-hose-with-10-swivel-fittings-750-psi","provider":"North Trail Auto","version":"1.0","type":"link"}