{"product_id":"evil-energy-6an-ptfe-fuel-line-kit-20ft-nylon-braided-hose-an6-e85-compatible-1500-psi","title":"EVIL ENERGY 6AN PTFE Fuel Line Kit — 20ft Nylon-Braided Hose (AN6, E85 Compatible, 1500 PSI)","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 6AN PTFE Fuel Line Kit is a 20-foot, AN6 (5\/16\" ID) PTFE hose with nylon braid and AN fittings designed for high-temperature, high-pressure fuel delivery in E85, petrol, diesel and EFI applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis fuel line kit combines chemically inert PTFE tubing with a protective nylon braid and AN6 compatibility for fuel-injected engines, LS swaps and any installation that needs a flexible yet pressure-rated hose. The kit is engineered to withstand extreme temperatures and aggressive fuels, and it comes in a continuous 20-foot length so you can route, cut and assemble fittings to suit custom engine bays or replacement runs.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the technical limits and material benefits of this PTFE hose?\u003c\/h3\u003e\n\n\u003cp\u003eThis line uses polytetrafluoroethylene (PTFE) as the inner tube for excellent chemical resistance, wrapped in a nylon braid for abrasion protection and routing control. It’s rated for continuous use from -76°F to 446°F (-60°C to 230°C) with a working pressure up to 1,500 PSI and a burst pressure around 4,500 PSI.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 5\/16\" (0.31 in), outer diameter: 0.45 in.\u003c\/li\u003e\n  \u003cli\u003eLength: 20 ft (6 m) continuous run for custom routing.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -76°F to 446°F (-60°C to 230°C).\u003c\/li\u003e\n  \u003cli\u003ePressure: 1,500 PSI working, ~4,500 PSI burst.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan this hose handle E85, ethanol blends, and other aggressive fuels?\u003c\/h3\u003e\n\n\u003cp\u003eYes — PTFE is highly resistant to chemical attack and compatible with ethanol, gasoline, diesel, lubricants and many coolants. The material resists swelling and degradation common to some rubber hoses when exposed to alcohol-based fuels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for E85 and high-ethanol-content fuels.\u003c\/li\u003e\n  \u003cli\u003eSafe for common engine lubricants and coolants.\u003c\/li\u003e\n  \u003cli\u003eReduced fuel permeation compared with many rubber hoses.\u003c\/li\u003e\n  \u003cli\u003eRecommended for fuel-injection systems subject to varied fuel chemistry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what should I watch for during fitting?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit’s 20-foot length gives flexibility for routing and trimming, but PTFE is stiffer than rubber hose and cannot be sharply folded. For reliable leak-free connections, use proper AN6 fittings and have a knowledgeable installer handle tight bends and termination points.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure available routing path before cutting — hose is not foldable.\u003c\/li\u003e\n  \u003cli\u003eUse AN6-compatible fittings and correct assembly technique.\u003c\/li\u003e\n  \u003cli\u003eAvoid tight radius bends to prevent kinking or stress.\u003c\/li\u003e\n  \u003cli\u003eProfessional installation is recommended for engine swaps and high-pressure systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this the right choice for high-temperature engine bays and performance builds?\u003c\/h3\u003e\n\n\u003cp\u003eAbsolutely — the PTFE core tolerates elevated under-hood temperatures and the nylon braid helps protect against abrasion and hot surfaces. With a high working pressure rating and compatibility with performance fuels, it’s well-suited to EFI conversions and LS-swap installations where durability and chemical resistance matter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh temperature tolerance up to 446°F (230°C).\u003c\/li\u003e\n  \u003cli\u003ePressure-rated for performance fuel systems.\u003c\/li\u003e\n  \u003cli\u003eNylon braid for mechanical protection in tight engine bays.\u003c\/li\u003e\n  \u003cli\u003eLong 20 ft length for full vehicle runs or custom routing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY 6AN PTFE Fuel Line Kit is aimed at mechanics, custom fabricators and car enthusiasts performing LS swaps, EFI upgrades, or high-performance fuel system builds. Choose this hose if you need chemical resistance, high-temperature performance, and a pressure-rated AN6 solution; if you require flexible, foldable routing or DIY-only installation, consider consulting a professional first.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this PTFE hose compatible with E85 and ethanol blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE inner tube resists ethanol and E85, making it compatible with alcohol-blended fuels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend the hose sharply for tight engine bays?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The hose is relatively stiff; avoid sharp folds and use proper routing or fittings. Professional installation is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48082827739294,"sku":"B0CQT1S1X8","price":150.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-an6-ptfe-fuel-line.jpg?v=1785815695","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-6an-ptfe-fuel-line-kit-20ft-nylon-braided-hose-an6-e85-compatible-1500-psi","provider":"North Trail Auto","version":"1.0","type":"link"}