{"product_id":"evil-energy-6an-ptfe-hose-end-fitting-45-black-2pc-6061-t6-aluminum-1500-psi","title":"EVIL ENERGY 6AN PTFE Hose End Fitting 45° Black — 2pc, 6061-T6 Aluminum, 1500 PSI","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 6AN 45° PTFE hose end fitting is a black 45-degree aluminum connector designed specifically for PTFE fuel hose, sold as a 2-piece set for high-pressure automotive and motorsport plumbing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 6061-T6 aluminum with a 360° swivel and a 37° AN seal, this 6AN (9\/16-18UNF) fitting provides a compact, angled connection for PTFE-lined fuel hoses. It is rated to 1500 PSI and performs across a wide temperature span (-65°F to 252°F), making it suitable for demanding engine bays and race applications where secure, leak-free PTFE connections are required. This description explains compatibility, installation features, and practical use cases so you can confirm fit and performance before buying.\u003c\/p\u003e\n\n\u003ch3\u003eWill this fitting work with my PTFE fuel hose?\u003c\/h3\u003e\n\n\u003cp\u003eYes — this fitting is intended exclusively for PTFE-lined hoses. The internal geometry, seal angle, and clamping design match the dimensions and behavior of PTFE hose assemblies rather than rubber or braided lines.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eThread size: 6AN (9\/16-18UNF) for standard AN plumbing ports.\u003c\/li\u003e\n  \u003cli\u003eDesigned only for PTFE-lined hose; not compatible with non-PTFE hoses.\u003c\/li\u003e\n  \u003cli\u003e37° AN sealing surface ensures metal-to-metal compression sealing.\u003c\/li\u003e\n  \u003cli\u003e360° swivel tail eases hose routing and prevents twisting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow reliable is the seal and what operating conditions can it handle?\u003c\/h3\u003e\n\n\u003cp\u003eThe AN side uses a 37° angle seal that creates a dependable metal-to-metal compression joint when torqued properly. Rated to 1500 PSI, the fitting withstands typical fuel system pressures in both street and many motorsport setups, while the temperature rating covers cold starts and hot engine environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: up to 1500 PSI for fuel and fluid lines.\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -65°F to 252°F for broad environmental tolerance.\u003c\/li\u003e\n  \u003cli\u003eAluminum 6061-T6 construction provides strength with reduced weight.\u003c\/li\u003e\n  \u003cli\u003eSwivel design reduces stress on hose ends, improving long-term sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what tools or parts are required?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for anyone familiar with AN\/PTFE hose assemblies: assemble the PTFE hose end onto the fitting, seat the 37° flare, and torque to recommended AN specifications. The swivel feature simplifies alignment so less repositioning and rework is needed during assembly.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHand-tighten then torque to standard 6AN\/9\/16-18UNF specs — use appropriate AN wrenches.\u003c\/li\u003e\n  \u003cli\u003eWorks with pre-lined PTFE hose and compatible hose ends; follow hose maker instructions.\u003c\/li\u003e\n  \u003cli\u003e360° swivel allows correct routing without twisting the hose.\u003c\/li\u003e\n  \u003cli\u003eSold as a two-piece set so you can replace or outfit two lines at once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the EVIL ENERGY version different from generic fittings?\u003c\/h3\u003e\n\n\u003cp\u003eEVIL ENERGY focuses on durable materials and motorsport-ready details: 6061-T6 aluminum keeps weight low while maintaining structural integrity, and the Black finish offers corrosion resistance and a discreet appearance under the hood. The swivel tail and strict PTFE-only design reduce common failure modes like hose kinking or mismatched seals.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e6061-T6 alloy for strength-to-weight balance and longevity.\u003c\/li\u003e\n  \u003cli\u003eBlack anodized or coated finish for corrosion protection and aesthetics.\u003c\/li\u003e\n  \u003cli\u003eBuilt specifically for PTFE hose to avoid sealing issues that occur with mixed systems.\u003c\/li\u003e\n  \u003cli\u003e360° swivel reduces installation stress and long-term wear on hose ends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? This 6AN 45° PTFE hose end fitting from EVIL ENERGY is aimed at tuners, fabricators, and motorsport mechanics who need a compact, angled PTFE connection that holds up under pressure and heat. Choose this 2-pack when replacing damaged PTFE fittings, assembling a custom fuel or oil line, or upgrading to a lighter, more serviceable AN-style plumbing layout. If you require fittings for non-PTFE hoses or different thread sizes, select components matched to those specific hose types and sizes.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this fitting with braided nylon or rubber hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. This fitting is engineered exclusively for PTFE-lined hoses and will not seal properly with non-PTFE hoses.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What pressure and temperature can the fitting handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Rated for up to 1500 PSI and -65°F to 252°F, suitable for many fuel and fluid system needs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48086852239518,"sku":"B0BN5DVWJW","price":31.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-6an-45deg-front-facing.jpg?v=1785907944","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-6an-ptfe-hose-end-fitting-45-black-2pc-6061-t6-aluminum-1500-psi","provider":"North Trail Auto","version":"1.0","type":"link"}