{"product_id":"evil-energy-an10-90-one-piece-full-flow-hose-end-swivel-7-8-14-unf-6061-t6-aluminum-1-500-psi","title":"EVIL ENERGY AN10 90° One-Piece Full-Flow Hose End Swivel — 7\/8-14 UNF, 6061-T6 Aluminum, 1,500 PSI","description":"\u003cstrong\u003eEVIL ENERGY 10AN 90° one-piece full-flow hose end swivel is a 7\/8-14 UNF threaded, 37°-sealed aluminum fitting designed for stainless or nylon braided CPE hoses to deliver smooth, high-pressure fluid transfer.\u003c\/strong\u003e\n\n\u003cp\u003eThis precision machined hose end from EVIL ENERGY is built from 6061-T6 aluminum and shaped for uninterrupted flow in tight spaces. Its one-piece, cutter-style design minimizes flow restriction and abrasion while the 90° swivel orientation helps route lines cleanly around engine bays or equipment panels. Rated for a maximum working pressure of 1,500 PSI and a temperature window from -40°F to 250°F, it is engineered for demanding automotive and industrial fluid systems that use braided hoses.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the 90° one-piece design improve hose routing and flow?\u003c\/h3\u003e\n\u003cp\u003eThe 90° angle lets you change hose direction without bending the hose sharply, reducing stress and potential kinks. Being a one-piece full-flow fitting eliminates internal joints that can create turbulence or collect debris. The cutter-style end bites into braided hose coverings for a secure mechanical grip.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRight-angle route for compact spaces and tight engine bays\u003c\/li\u003e\n  \u003cli\u003eFull-flow internal profile reduces pressure drop across the fitting\u003c\/li\u003e\n  \u003cli\u003eCutter-style edge secures braid for leak-resistant installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat hoses and thread standards are compatible with this AN10 fitting?\u003c\/h3\u003e\n\u003cp\u003eThis item is sized AN10 and uses a 7\/8-14 UNF threaded male connection with a 37° sealing surface on the AN side. It is specifically intended for use with stainless steel braided and nylon braided CPE hoses; it is not suitable for smooth rubber or unbraided lines. Always match thread pitch and sealing angle when mating to adapters or ports.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAN size: 10AN (AN10) — common for high-flow lines\u003c\/li\u003e\n  \u003cli\u003eThread spec: 7\/8-14 UNF with 37° AN sealing face\u003c\/li\u003e\n  \u003cli\u003eHose types: stainless steel braided and nylon braided CPE hoses only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable is the fitting under pressure and temperature extremes?\u003c\/h3\u003e\n\u003cp\u003eMachined from 6061-T6 aluminum, this fitting offers a strong strength-to-weight ratio and good corrosion resistance when anodized or coated. It is rated to a maximum working pressure of 1,500 PSI and performs across a wide operating temperature range, suitable for many automotive and industrial applications. Proper installation and compatible hose selection are essential to reach the specified performance limits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: 6061-T6 aluminum for strength and light weight\u003c\/li\u003e\n  \u003cli\u003eMax working pressure: 1,500 PSI for high-pressure systems\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 250°F for broad operating conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this AN10 hose end for best results?\u003c\/h3\u003e\n\u003cp\u003eInstallation requires cutting the braided CPE hose square, inserting the hose fully onto the fitting, and securing per the hose manufacturer’s recommended method (typically clamping or ferrule compression when applicable). Inspect the braid and sealing faces for damage before assembly; ensure mating threads and the 37° seat are clean to prevent leaks. Periodic checks for abrasion, corrosion, and torque retention will prolong service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut hose square and clean braid before fitting\u003c\/li\u003e\n  \u003cli\u003eMatch to compatible AN10 ports and torque to recommended specs\u003c\/li\u003e\n  \u003cli\u003eInspect regularly for wear, corrosion, and hose slippage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY’s AN10 90° one-piece full-flow hose end swivel is aimed at mechanics, motorsport teams, and DIY engine builders who need a compact, high-flow coupling for braided CPE hoses. It suits applications requiring reliable sealing under pressure, neat hose routing in constrained spaces, and lightweight yet durable hardware. Not intended for use with unbraided hoses or fittings mismatched in thread or sealing angle.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this AN10 fitting work with rubber hoses?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. It is designed for stainless steel and nylon braided CPE hoses only; unbraided rubber hoses are not compatible.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum pressure rating?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The fitting is rated for a maximum working pressure of 1,500 PSI when used with compatible braided hoses.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48086427500702,"sku":"B0D3C1WLCS","price":43.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-an10-90deg-front-view.jpg?v=1785898330","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-an10-90-one-piece-full-flow-hose-end-swivel-7-8-14-unf-6061-t6-aluminum-1-500-psi","provider":"North Trail Auto","version":"1.0","type":"link"}