{"product_id":"evil-energy-an6-braided-fuel-hose-25ft-black-cpe-core-750-psi-working","title":"EVIL ENERGY AN6 Braided Fuel Hose 25FT Black — CPE Core, 750 PSI Working","description":"\u003cp\u003e\u003cstrong\u003eA 25-foot AN6 braided fuel hose from EVIL ENERGY built with a CPE inner tube, 304 stainless wire reinforcement and nylon outer braid for durable, high-pressure fuel and fluid routing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis EVIL ENERGY 6AN fuel line is engineered for vehicle performance and industrial use where a flexible, abrasion-resistant hose is required. It combines a chemically resistant CPE rubber core with a stainless-steel reinforcement layer and a protective nylon braid to handle a wide range of fuels and fluids across a broad temperature window. The hose is sized for AN6 swivel fittings and supplied in a convenient 25-foot length, making it suitable for installations that need longer runs without multiple joints.\u003c\/p\u003e\n\n\u003ch3\u003eHow tough is this hose under pressure and temperature extremes?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose is rated for continuous service at up to 750 PSI and can survive an ultimate burst near 2,250 PSI, giving a large safety margin for many automotive and performance applications. Its working temperature range spans from -22°F to 248°F, so it performs through cold starts and high-heat engine compartments without rapid degradation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaximum working pressure: 750 PSI for routine use\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: approximately 2,250 PSI for safety margin\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range: -22°F to 248°F\u003c\/li\u003e\n  \u003cli\u003eDurable materials resist heat, abrasion, and many automotive fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and construction provide this hose's durability?\u003c\/h3\u003e\n\n\u003cp\u003eConstruction uses a CPE rubber inner liner that resists fuel and chemical exposure, reinforced by a 304-grade stainless-steel wire braid for hoop strength, and finished with a nylon outer sheath for abrasion and UV resistance. Those layers work together to reduce permeation, avoid kinking, and extend service life in harsh environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eInner layer: chemical-resistant CPE rubber for fuel compatibility\u003c\/li\u003e\n  \u003cli\u003eReinforcement: 304 stainless steel wire for pressure strength\u003c\/li\u003e\n  \u003cli\u003eOuter braid: nylon for abrasion and UV protection\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for use with AN6 swivel hose ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and applications is the 6AN hose compatible with?\u003c\/h3\u003e\n\n\u003cp\u003eThis braided line handles a wide spectrum of automotive and industrial liquids, including gasoline blends used in racing, diesel, oil, transmission fluid, hydraulic fluids, and vacuum lines. Because of its flexibility and pressure rating, it's commonly used for fuel supply and return, turbo cooler and oil feed lines, and coolant or transmission oil cooler connections.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eCompatible fluids: race gas, diesel, fuel, oil, transmission fluid, hydraulic fluid\u003c\/li\u003e\n  \u003cli\u003eCommon uses: fuel supply\/return, oil feed, turbo cooler lines, coolant and vacuum lines\u003c\/li\u003e\n  \u003cli\u003eWorks with AN6 swivel hose ends only—requires appropriate fittings\u003c\/li\u003e\n  \u003cli\u003eSupplied length minimizes coupling needs for long runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the hose dimensions and installation notes?\u003c\/h3\u003e\n\n\u003cp\u003eThe hose has an internal diameter of 0.31 inches and an overall outside diameter of 0.56 inches, supplied as a 25-foot coil. Installation instructions are included; note that proper AN6 swivel fittings are required to attach the hose securely and maintain rated pressure performance.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHose ID: 0.31 inch — fits AN6 applications\u003c\/li\u003e\n  \u003cli\u003eHose OD: 0.56 inch — compact routing in tight areas\u003c\/li\u003e\n  \u003cli\u003eLength: 25 feet — long continuous runs with fewer joints\u003c\/li\u003e\n  \u003cli\u003eIncludes installation instructions; use AN6 swivel hose ends only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: The EVIL ENERGY 6AN braided fuel line suits automotive builders, performance tuners, motorsport teams and technicians who need a flexible, durable hose for fuel, oil, and fluid systems. It’s ideal when you want a long, single-piece run with strong pressure capacity and resistant materials for demanding engine-bay environments.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose be used with gasoline and diesel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE inner liner and stainless reinforcement are compatible with race gas, diesel, and most automotive oils and fluids.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fittings are required for installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Use AN6 swivel hose ends only; proper crimping or clamp methods and installation instructions are included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48081123836062,"sku":"B0D7S887MQ","price":78.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-view-braided-hose.jpg?v=1785796828","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-an6-braided-fuel-hose-25ft-black-cpe-core-750-psi-working","provider":"North Trail Auto","version":"1.0","type":"link"}