{"product_id":"evil-energy-an6-braided-fuel-line-hose-10-ft-black-cpe-core-304-stainless-braid-750-psi","title":"EVIL ENERGY AN6 Braided Fuel Line Hose 10 ft Black — CPE Core \u0026 304 Stainless Braid, 750 PSI","description":"\u003cstrong\u003eEVIL ENERGY AN6 10-foot braided fuel line kit is a high-pressure AN6 hose built with a CPE inner tube, 304 stainless wire braid and nylon outer for fuel, oil and racing applications.\u003c\/strong\u003e\n\n\u003cp\u003eThis 6AN (AN6) fuel hose from EVIL ENERGY combines a chemical-resistant CPE inner core, a stainless-steel reinforcement braid, and a nylon outer layer to deliver a durable 10-foot line rated for demanding automotive and motorsport use. It’s engineered to handle high working pressures, wide temperature swings, and repeated bending while remaining compatible with petrol, diesel, oil, transmission fluid and many racing fuels.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the key pressure, temperature and size specifications?\u003c\/h3\u003e\n\u003cp\u003eThe hose has a 0.31 inch (8 mm) internal diameter and a 0.56 inch (14.3 mm) outside diameter, supplied as a 10-foot length. It is specified for a 750 psi working pressure and a 2250 psi burst pressure, and performs across a broad temperature range from -22°F to 248°F (-30°C to 120°C).\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 0.31\" (8 mm)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 0.56\" (14.3 mm)\u003c\/li\u003e\n  \u003cli\u003eLength: 10 ft (approx. 3.05 m)\u003c\/li\u003e\n  \u003cli\u003eWorking \/ burst pressure: 750 psi \/ 2250 psi\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F (-30°C to 120°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow is the hose constructed and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eLayered construction gives the EVIL ENERGY line a balance of chemical compatibility, strength and abrasion resistance. A CPE rubber inner resists fuels and oils, a 304 stainless wire braid supplies mechanical strength and pressure containment, and a nylon outer braid protects against abrasion and UV exposure.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCPE inner tube resists hydrocarbons and heat\u003c\/li\u003e\n  \u003cli\u003e304 stainless braid provides burst resistance and fatigue life\u003c\/li\u003e\n  \u003cli\u003eNylon outer braid improves abrasion and weather resistance\u003c\/li\u003e\n  \u003cli\u003eMin bend radius: 63.5 mm for tight routing without kinking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and applications is this hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eDesigned for versatile use, the AN6 braided hose accepts a wide variety of automotive and racing fluids. It’s commonly used for fuel delivery, return lines, oil feed\/return, transmission fluid lines, vacuum and some hydraulic roles, depending on system requirements and fittings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gasoline, race gas, diesel and blended fuels\u003c\/li\u003e\n  \u003cli\u003eSafe for engine oil, transmission fluid and many hydraulic fluids\u003c\/li\u003e\n  \u003cli\u003eSuitable for vacuum and breather lines in performance builds\u003c\/li\u003e\n  \u003cli\u003eNot a substitute for specialized high-temp hydraulic hoses unless specified\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I trim and install the 10-foot AN6 hose correctly?\u003c\/h3\u003e\n\u003cp\u003eCut the hose square with a fine-tooth blade or tube cutter and use AN6-compatible fittings or reusable hose ends designed for braided assemblies. Ensure fittings are properly sized to the 0.31\" ID, check hose routing for minimum bend radius, and secure with clamps or mounts to reduce vibration and chafing.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim cleanly and deburr before fitting\u003c\/li\u003e\n  \u003cli\u003eMatch fittings to AN6 thread and 8 mm internal diameter\u003c\/li\u003e\n  \u003cli\u003eRespect the 63.5 mm minimum bend radius when routing\u003c\/li\u003e\n  \u003cli\u003eClamp and protect against sharp edges and heat sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY’s AN6 10ft braided fuel hose is aimed at car and motorcycle enthusiasts, performance tuners, race teams and DIY mechanics who need a robust, fuel-compatible line for builds, repairs or custom plumbing. If you need a mid-size AN6 hose that handles elevated pressures, varied fuels and repeated flexing while offering abrasion resistance, this kit is a practical, ready-to-cut solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this AN6 hose safe for gasoline and racing fuels?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The CPE inner tube and braided construction are compatible with gasoline, race fuels and many oils, but verify fuel blends before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the minimum bend radius for this hose?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose requires a minimum bending radius of 63.5 mm to avoid kinking and maintain flow integrity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48083711426718,"sku":"B077GTNT9D","price":64.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-view_1a7c671c-6332-426b-9404-c29a0b9ff706.jpg?v=1785835397","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-an6-braided-fuel-line-hose-10-ft-black-cpe-core-304-stainless-braid-750-psi","provider":"North Trail Auto","version":"1.0","type":"link"}