{"product_id":"evil-energy-an8-braided-fuel-hose-20ft-black-cpe-core-750-psi-high-pressure-nylon-jacket","title":"EVIL ENERGY AN8 Braided Fuel Hose 20FT Black — CPE Core, 750 PSI High-Pressure Nylon Jacket","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY's AN8 braided fuel line is a 20-foot, high-pressure hose built with a CPE inner core, 304 steel braid, and nylon outer jacket for durable fuel, oil, and hydraulic routing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis 8AN (AN8) braided fuel hose delivers a balance of strength, heat tolerance, and flexibility for performance and maintenance tasks. Designed to meet the demands of automotive, racing, and industrial applications, the hose resists bursting and handles a wide temperature range while remaining compatible with many fluids. Its 0.41\" inner diameter and 0.65\" outer diameter make it suitable for standard AN8 swivel fittings and common fluid-transfer uses.\u003c\/p\u003e\n\n\u003ch3\u003eHow tough is this hose under pressure and heat?\u003c\/h3\u003e\n\u003cp\u003eThe construction targets reliability: a CPE inner tube resists chemical attack, a 304 stainless steel wire braid provides mechanical strength, and a nylon jacket protects against abrasion and UV. The hose is rated to 750 PSI working pressure with a 2,250 PSI burst rating, plus a usable temperature window from -22°F to 248°F.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 750 PSI for continuous service\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 2,250 PSI for safety margin\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -22°F to 248°F for broad climate use\u003c\/li\u003e\n  \u003cli\u003e304 stainless braid resists kinking and adds tensile strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat fluids and systems can I use it with?\u003c\/h3\u003e\n\u003cp\u003eThis braided line is formulated to accept a wide range of automotive and industrial fluids without rapid degradation. It works with fuels, diesel, oil, transmission fluids, hydraulic fluids, race gas, coolant return lines (non-pressurized), vacuum lines, and turbo cooling circuits when fittings and system parameters are appropriate.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with gasoline, diesel, and race fuels\u003c\/li\u003e\n  \u003cli\u003eSuitable for engine oil and transmission fluids\u003c\/li\u003e\n  \u003cli\u003eAccepts hydraulic fluids and vacuum applications\u003c\/li\u003e\n  \u003cli\u003eNot intended for unknown aggressive chemicals without testing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the size details and how do I install it?\u003c\/h3\u003e\n\u003cp\u003eThe hose measures 20 feet in total length with an inner diameter of 0.41 inches and outer diameter of 0.65 inches, matching standard AN8 swivel hose ends. Installation instructions are included; the hose requires AN8 swivel fittings and should be routed to avoid sharp edges, excessive bends, or heat sources that exceed the rated temperature.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLength: 20 feet — long enough for many routed systems\u003c\/li\u003e\n  \u003cli\u003eInner diameter: 0.41\" (AN8 nominal ID)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: 0.65\" — fits AN8 clamps and guides\u003c\/li\u003e\n  \u003cli\u003eRequires AN8 swivel hose ends for proper fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does construction affect longevity and maintenance?\u003c\/h3\u003e\n\u003cp\u003eThe layered build—CPE inner tube, 304 steel braid, nylon outer braid—offers resistance to abrasion, pressure cycles, and common automotive fluids, which helps extend service life under typical operating conditions. Regular inspections for chafing, connector integrity, and heat exposure will maximize lifespan; replace the hose if you see inner swelling, cracks, or braid separation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCPE inner layer resists oil and fuel swell\u003c\/li\u003e\n  \u003cli\u003eStainless wire braid maintains pressure capacity over time\u003c\/li\u003e\n  \u003cli\u003eNylon outer jacket reduces abrasion and UV wear\u003c\/li\u003e\n  \u003cli\u003eInspect fittings and routing every service interval\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: EVIL ENERGY's AN8 braided fuel line suits mechanics, racers, tuners, and DIY vehicle builders who need a robust, flexible supply or return line for fuel, oil, or hydraulic circuits. Pick this hose when you want a long 20-foot run, reliable 750 PSI working pressure, and compatibility with common AN8 swivel fittings; professionals and serious enthusiasts will appreciate the durable materials and broad fluid compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this hose fit AN8 fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The hose has a 0.41\" ID and works with standard AN8 swivel hose ends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can it handle race fuel and oil?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. It's compatible with race gas, gasoline, diesel, oil, and many hydraulic fluids.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48080973234334,"sku":"B0BJJSQ6K3","price":77.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-an8-front-packaging.jpg?v=1785793402","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-an8-braided-fuel-hose-20ft-black-cpe-core-750-psi-high-pressure-nylon-jacket","provider":"North Trail Auto","version":"1.0","type":"link"}