{"product_id":"evil-energy-an8-ptfe-fuel-line-kit-16ft-0-394-id-nylon-braided-e85-compatible-high-temp","title":"EVIL ENERGY AN8 PTFE Fuel Line Kit 16ft (0.394\" ID) — Nylon-Braided, E85-Compatible, High-Temp","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 8AN PTFE Fuel Line Kit is a 16-foot, AN8 (0.394\" ID) PTFE inner tube with a nylon braided outer jacket engineered for high-temperature, high-pressure automotive fuel systems including E85.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis PTFE fuel hose combines a smooth, chemically resistant inner Teflon-like liner with a durable nylon braid for abrasion resistance and routing stability. The hose is sized as -8 AN (13\/32\" \/ 0.394\" inner diameter), has an overall outside diameter near 0.55\", and ships in a 16-foot length for long runs or multiple shorter runs. It is rated to operate across extreme temperatures and pressures, compatible with gasoline, E85 blends, lubricants, and many coolants; however, the construction is relatively stiff and benefits from professional routing and installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat measurements and performance ratings should I verify before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm the inner diameter, overall diameter, and required run length to ensure fittings and clamps will fit and that the hose will route without excessive bending. Check the pressure and temperature ratings against your system’s peak conditions to avoid over-stressing the line.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 13\/32\" (0.394 inch) — AN8 specification\u003c\/li\u003e\n  \u003cli\u003eOuter diameter: ~0.55 inch\u003c\/li\u003e\n  \u003cli\u003eLength: 16 feet (single continuous hose)\u003c\/li\u003e\n  \u003cli\u003eWorking temperature: -76°F to 446°F (-60°C to 230°C)\u003c\/li\u003e\n  \u003cli\u003eWorking pressure: up to 1,500 PSI; burst ≈ 4,500 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does this hose handle E85 and other aggressive fuels?\u003c\/h3\u003e\n\u003cp\u003eThe PTFE inner liner provides excellent chemical resistance, making it suitable for ethanol-rich fuels like E85 as well as conventional gasoline, diesel, and many lubricants. The smooth bore also reduces deposit buildup and flow restriction compared with some rubber hoses.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with E85, gasoline, diesel, lubricants, and many coolants\u003c\/li\u003e\n  \u003cli\u003ePTFE liner resists swelling, corrosion, and chemical attack\u003c\/li\u003e\n  \u003cli\u003eNylon braid gives abrasion protection and improved abrasion resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs installation straightforward, and what should I watch for?\u003c\/h3\u003e\n\u003cp\u003eThe hose is stiffer than standard rubber lines, so it resists tight bending and should not be folded in half. For clean, leak-free connections, use AN8-compatible fittings and follow torque recommendations; professional installation is recommended for coil routing, flareless fittings, or when compression sleeves are required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDo not fold or sharply kink the hose — maintain recommended bend radius\u003c\/li\u003e\n  \u003cli\u003eUse AN8 fittings or compatible adapters and correct sealing methods\u003c\/li\u003e\n  \u003cli\u003eInspect clamps and routing points to prevent chafing against sharp edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhere is this hose best applied within a vehicle or system?\u003c\/h3\u003e\n\u003cp\u003eBecause of its temperature and pressure ratings, this PTFE\/nylon hose performs well in fuel delivery lines, return systems, and feed lines for upgraded fuel pumps or forced-induction setups. It also suits many high-temperature or chemically aggressive auxiliary systems where a robust, long-life fuel line is needed.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFuel feed and return lines on performance vehicles\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature engine bay routing and turbocharged applications\u003c\/li\u003e\n  \u003cli\u003eCustom plumbing where chemical resistance is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Mechanics, tuners, and DIY enthusiasts fitting high-flow or ethanol-capable fuel systems who need a long, chemically resistant AN8 line with strong temperature and pressure capability. If you require a flexible, easily bent hose for tight bends, consider alternatives; if you need durable, E85-safe plumbing and a continuous 16-foot run, the EVIL ENERGY 8AN PTFE fuel line kit is a practical choice.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose compatible with E85?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE liner is chemically resistant and rated for E85, gasoline, diesel, and many lubricants.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I bend or fold the hose to fit tight spaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. The hose is relatively stiff and should not be folded; maintain proper bend radius or use fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48087760306334,"sku":"B07QKYYPQX","price":137.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging_60d5f8c9-d0c9-48af-84a6-cf0e18a28512.jpg?v=1785930707","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-an8-ptfe-fuel-line-kit-16ft-0-394-id-nylon-braided-e85-compatible-high-temp","provider":"North Trail Auto","version":"1.0","type":"link"}