{"product_id":"evil-energy-an8-ptfe-fuel-line-kit-20ft-e85-compatible-nylon-braided-hose-13-32-id-high-temp-1500-psi","title":"EVIL ENERGY AN8 PTFE Fuel Line Kit 20ft — E85-Compatible Nylon-Braided Hose, 13\/32\" ID, High Temp\/1500 PSI","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 8AN PTFE Fuel Line Kit is a 20-foot, E85-compatible, nylon-braided AN8 fuel hose assembly engineered for high temperature and high pressure automotive fuel systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis PTFE-lined, nylon-braided hose delivers chemical resistance and mechanical strength for performance vehicles, custom installs, and race applications. The hose inner diameter measures 13\/32\" (0.39\") with a 0.55\" outer diameter and comes as a 20 ft (6 m) length—sized for flexible routing while maintaining fuel compatibility across gasoline, ethanol blends, lubricants, and coolants.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this hose handle heat and pressure during demanding use?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY PTFE core and reinforced nylon braid resist degradation from elevated temperatures and sustain high working loads. It operates from -76°F to 446°F (-60°C to 230°C) and supports a maximum working pressure of 1,500 PSI with a bursting pressure up to 4,500 PSI.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature rating: -76°F to 446°F (-60°C to 230°C).\u003c\/li\u003e\n  \u003cli\u003eMaximum working pressure: 1,500 PSI.\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 4,500 PSI for safety margin under peak loads.\u003c\/li\u003e\n  \u003cli\u003ePTFE liner provides chemical stability at high temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIs this hose compatible with E85 and other fuels?\u003c\/h3\u003e\n\u003cp\u003eYes—PTFE is highly resistant to ethanol and a wide range of automotive fluids, making this AN8 line suitable for E85, gasoline, diesel, and most lubricants and coolants. It’s built for applications where fuel compatibility and long-term chemical resistance matter.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for E85, gasoline, diesel, and many lubricants.\u003c\/li\u003e\n  \u003cli\u003ePTFE inner surface reduces fuel absorption and swelling.\u003c\/li\u003e\n  \u003cli\u003eNylon braid adds abrasion resistance for routed runs.\u003c\/li\u003e\n  \u003cli\u003eRecommended for fuel systems, return lines, and feed lines in performance setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat size and routing considerations should I plan for?\u003c\/h3\u003e\n\u003cp\u003eThis kit provides a 13\/32\" (0.39\") inner diameter and 0.55\" outer diameter across 20 ft (6 m) of hose—large enough for AN8 fittings and most high-flow fuel needs. Because the PTFE hose is relatively stiff, avoid tight bends and allow gentle curves; professional installation is advised for secure, leak-free connections.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 13\/32\" (0.39\"); outer diameter: 0.55\".\u003c\/li\u003e\n  \u003cli\u003eTotal length: 20 ft (6 m) — cut to fit as needed.\u003c\/li\u003e\n  \u003cli\u003eDo not fold or sharply kink; maintain gentle bend radii.\u003c\/li\u003e\n  \u003cli\u003eUse proper AN8 fittings and clamps for leak-proof joins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain this PTFE fuel line?\u003c\/h3\u003e\n\u003cp\u003eInstallation is best handled by an experienced mechanic because the hose is relatively stiff and requires correct fitting selection and secure termination. Regular inspection for abrasion at contact points and proper clamp torque helps maintain long-term reliability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional installation recommended to avoid kinks and leaks.\u003c\/li\u003e\n  \u003cli\u003eTrim hose ends cleanly and use compatible AN8 fittings.\u003c\/li\u003e\n  \u003cli\u003eInspect routing points for chafing and secure with clamps.\u003c\/li\u003e\n  \u003cli\u003eReplace if any abrasion, cuts, or deformation appears.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY 8AN PTFE Fuel Line Kit is aimed at performance builders, tuners, and custom car shops that need a chemically resistant, high-temperature, high-pressure fuel hose for E85-capable systems. If you’re assembling race fuel systems, upgrading fuel delivery for forced-induction engines, or routing fuel lines in tight engine bays where durability and compatibility are priorities, this kit offers a long-length solution—just plan for professional routing and proper fittings to get the best performance and safety.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this hose be used with E85 fuel?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The PTFE core is compatible with E85 and most automotive fuels, offering chemical resistance to ethanol blends.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum working pressure?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The hose supports a maximum working pressure of 1,500 PSI and a bursting pressure of 4,500 PSI.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48082883444894,"sku":"B0922KVTWC","price":162.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-an8-ptfe-fuel-hose.jpg?v=1785817855","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-an8-ptfe-fuel-line-kit-20ft-e85-compatible-nylon-braided-hose-13-32-id-high-temp-1500-psi","provider":"North Trail Auto","version":"1.0","type":"link"}