{"product_id":"evil-energy-fuel-hose-1-2-in-sae-30r7-10-ft-nbr-rubber-300-psi-working-pressure","title":"EVIL ENERGY Fuel Hose 1\/2 in SAE 30R7 — 10 ft NBR Rubber, 300 PSI Working Pressure","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 1\/2\" Fuel Hose is a 10-foot, SAE 30R7 NBR rubber line rated for 300 PSI working pressure and built for diesel, gasoline, biodiesel and oil-handling applications.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis premium fuel hose combines an oil-resistant NBR (nitrile butadiene rubber) inner tube with a braided polyester reinforcement to meet SAE 30R7 performance. The hose is designed to withstand demanding fuel-system environments with a broad temperature range and a durable construction that resists wear, flexing and common hydrocarbons. It is supplied in a convenient 10-foot length for repairs, retrofits or custom installations.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this hose under pressure and heat?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY hose handles a continuous working pressure of 300 PSI with a burst rating around 1200 PSI, providing a large safety margin for typical fuel-system uses. Its NBR compound resists oil swell and degradation while the braided polyester reinforcement improves tensile strength and abrasion resistance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 300 PSI; burst pressure: 1200 PSI.\u003c\/li\u003e\n  \u003cli\u003eTemperature tolerance: from -40°F up to 257°F for cold starts and hotter engine compartments.\u003c\/li\u003e\n  \u003cli\u003eWall thickness: 3 mm for toughness and puncture resistance.\u003c\/li\u003e\n  \u003cli\u003eConstruction: NBR inner tube with braided polyester reinforcement for long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat sizes and fittings does the hose support for installations?\u003c\/h3\u003e\n\u003cp\u003eThis product is sized with a 1\/2\" (13 mm) inner diameter and 0.75\" (19 mm) outer diameter, suitable for many common push-lock and crimp-style hose fittings. The 10-foot length gives flexibility to cut to size and attach compatible push-lock connectors or clamps for fuel systems, oil cooling loops, and other liquid transfer setups.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter (ID): 1\/2\" (13 mm); outer diameter (OD): 0.75\" (19 mm).\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 4.7\" (120 mm) to avoid kinks and maintain flow.\u003c\/li\u003e\n  \u003cli\u003eLength: 10 ft ready to trim for custom runs or replacements.\u003c\/li\u003e\n  \u003cli\u003eCompatible with common push-lock fittings and SAE 30R7 installation methods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and systems is this hose compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe NBR inner tube is formulated for resistance to petroleum fuels and many lubricants, making it appropriate for diesel, gasoline, biodiesel blends, motor oil, grease and similar hydrocarbons. It is intended for use in fuel delivery lines, oil cooling circuits and other vehicle or industrial fluid pathways that call for SAE 30R7-rated hose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible media: diesel, gasoline, biodiesel, lubrication oils, grease, and similar hydrocarbons.\u003c\/li\u003e\n  \u003cli\u003eMeets and exceeds SAE 30R7 standards for fuel-handling applications.\u003c\/li\u003e\n  \u003cli\u003eNot intended for compressed air or oxygen service—use only for rated liquids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the hose to maximize lifespan?\u003c\/h3\u003e\n\u003cp\u003eCut the hose square with a sharp blade and use appropriate push-lock or crimp fittings sized for 1\/2\" ID. Avoid sharp bends tighter than the 4.7\" minimum radius and secure the hose to prevent chafing; inspect periodically for abrasion, cracking or hardening and replace if signs of wear appear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTrim with a clean, straight cut for reliable sealing with fittings.\u003c\/li\u003e\n  \u003cli\u003eMaintain minimum bend radius of 4.7\" to prevent flow restriction or kinks.\u003c\/li\u003e\n  \u003cli\u003eCheck clamps and fittings regularly for leaks and retighten as needed.\u003c\/li\u003e\n  \u003cli\u003eReplace if the rubber shows cracking, severe swelling or other damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho this is for: mechanics, DIY auto enthusiasts, fleet maintenance teams and fabricators who need a dependable fuel-line solution that balances pressure capacity, oil resistance and installation flexibility. EVIL ENERGY's 1\/2\" SAE 30R7 fuel hose is ideal for repairs, custom fuel-system runs and oil-cooling plumbing where a durable NBR-lined, braided hose is required. If your project calls for a 10-foot section of hose rated for hydrocarbons between -40°F and 257°F and capable of 300 PSI working pressure, this hose is engineered to meet those needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for diesel and gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The NBR inner tube is compatible with diesel, gasoline and biodiesel blends for fuel-system use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut this to length and use push-lock fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 10ft hose is ready to trim to size and works with push-lock or proper crimp fittings for 1\/2\" ID lines.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48086333030558,"sku":"B097HC41K6","price":41.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging-fuel-hose_71296724-6c3c-4a2e-b1d7-27a145f93b05.jpg?v=1785895187","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-fuel-hose-1-2-in-sae-30r7-10-ft-nbr-rubber-300-psi-working-pressure","provider":"North Trail Auto","version":"1.0","type":"link"}