{"product_id":"evil-energy-fuel-hose-3-16-sae-30r7-10ft-nbr-rubber-300-psi-working-pressure","title":"EVIL ENERGY fuel hose 3\/16\" SAE 30R7 10ft — NBR rubber, 300 PSI working pressure","description":"\u003cp\u003e\u003cstrong\u003eEVIL ENERGY 3\/16 fuel hose is a 10-foot, NBR rubber SAE 30R7-rated line designed for fuel and oil transfer with a 300 psi working pressure and broad temperature tolerance.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBuilt for mechanics, fleet operators, and DIYers who need a reliable, compact fuel line, this hose combines nitrile-butadiene rubber (NBR) with braided polyester reinforcement to resist oil, fuel, grease, and wear. Its 3\/16\" (5 mm) inner diameter and 0.43\" (11 mm) outer diameter make it suitable for tight routing and push-lock fittings, while a 2.0\" (50 mm) minimum bend radius helps prevent kinking in confined spaces.\u003c\/p\u003e\n\n\u003ch3\u003eHow durable is this hose for everyday fuel system use?\u003c\/h3\u003e\n\u003cp\u003eThe EVIL ENERGY hose is engineered with NBR rubber and a braided polyester layer that resists abrasion, oil swell, and repeated flexing. It meets SAE 30R7 construction standards for general fuel and oil applications, providing a long service life when installed and routed correctly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: nitrile-butadiene rubber (NBR) for oil and fuel resistance\u003c\/li\u003e\n  \u003cli\u003eReinforcement: braided polyester fiber for strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eWall thickness: approximately 3 mm for puncture and abrasion protection\u003c\/li\u003e\n  \u003cli\u003eDesigned to exceed common SAE 30R7 expectations for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat performance can I expect under pressure and temperature extremes?\u003c\/h3\u003e\n\u003cp\u003eThis hose is rated for a 300 psi working pressure and a 1200 psi burst pressure, giving a solid safety margin for typical fuel-system and oil-transfer tasks. The temperature range spans -40°F to 257°F, so it works in cold starts and hot engine bay environments without rapid hardening or softening.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorking pressure: 300 psi for routine fuel and oil service conditions\u003c\/li\u003e\n  \u003cli\u003eBurst pressure: 1200 psi safety threshold\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -40°F to 257°F for wide climate compatibility\u003c\/li\u003e\n  \u003cli\u003eMinimum bend radius: 2.0\" (50 mm) to avoid kinks under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich fluids and applications are compatible with this SAE 30R7 hose?\u003c\/h3\u003e\n\u003cp\u003eThe NBR compound and braided construction make this hose suitable for diesel, gasoline, biodiesel blends, oil, grease, and similar hydrocarbon-based fluids. It is commonly used for fuel lines, oil cooler connections, and auxiliary fuel system routing where SAE 30R7 specification is required or preferred.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible fluids: diesel, gasoline, biodiesel, oil, grease\u003c\/li\u003e\n  \u003cli\u003eTypical uses: fuel system lines, oil cooling lines, steam emission routing\u003c\/li\u003e\n  \u003cli\u003eFitting style: suitable for push-lock or barbed fittings with clamp\u003c\/li\u003e\n  \u003cli\u003eLength: 10 feet (convenient for repairs and custom runs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I install and maintain the EVIL ENERGY fuel hose properly?\u003c\/h3\u003e\n\u003cp\u003eCut the hose squarely to size and use appropriately sized push-lock or barbed fittings with clamps to ensure leak-free connections. Avoid excessive twisting, sharp bends below the minimum radius, and contact with strong solvents or ozone sources to extend service life.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCut cleanly and use correct ID fittings for a tight seal\u003c\/li\u003e\n  \u003cli\u003eRespect 2.0\" minimum bend radius to prevent kinking\u003c\/li\u003e\n  \u003cli\u003eInspect regularly for cracking, swelling, or abrasion\u003c\/li\u003e\n  \u003cli\u003eReplace if exposed to incompatible chemicals or visible wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Technicians, mechanics, fabricators, and hobbyists needing a compact, oil-resistant fuel line will find the EVIL ENERGY 3\/16\" hose practical and dependable. It’s aimed at anyone re-routing fuel or oil lines in cars, small engines, generators, or industrial equipment where a 10-foot length, SAE 30R7 construction, and a 300 psi working pressure are appropriate. Choose this hose when you need a balance of flexibility, fuel compatibility, and reinforcement for everyday automotive and light industrial applications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this hose safe for biodiesel blends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The NBR construction is compatible with diesel and many biodiesel blends, but confirm compatibility with specific additive packages.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use this hose with push-lock fittings?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The 3\/16\" ID is suitable for push-lock or barbed fittings; use clamps as recommended for secure connections.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48087350542494,"sku":"B0BJNSZVVW","price":38.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-front-packaging_5a3f497f-305c-4c90-b1d1-42c4b0a40a93.jpg?v=1785921242","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-fuel-hose-3-16-sae-30r7-10ft-nbr-rubber-300-psi-working-pressure","provider":"North Trail Auto","version":"1.0","type":"link"}