{"product_id":"evil-energy-male-10an-weld-on-bung-fitting-stainless-steel","title":"EVIL ENERGY Male 10AN Weld on Bung Fitting Stainless Steel","description":"\u003cstrong\u003eEVIL ENERGY Male 10AN weld-on bung fittings are 304 stainless-steel adapters designed to create a durable, pressure-rated AN connection when welded into a tank, pipe, or tank wall.\u003c\/strong\u003e\n\n\u003cp\u003eThis two-piece set from EVIL ENERGY gives fabricators and vehicle builders a ready-made 10AN male flare interface for fuel, oil, coolant, or other fluid systems. Each bung is machined from 304 stainless steel, with a 37-degree AN sealing face and a 7\/8-14 UNF thread to accept standard 10AN hoses and fittings. The components are rated for high pressure and a wide operating temperature range; they are intended for professional installation and require a cooling period after welding for best results.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these bungs form a leak-resistant AN connection?\u003c\/h3\u003e\n\n\u003cp\u003eThe EVIL ENERGY bungs use a 37-degree flare surface to seal against AN fittings, a long-established mechanical sealing method in high-performance plumbing. When installed correctly, the flared AN fitting compresses against the precision-machined seat to form a metal-to-metal seal without washers.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e37° AN sealing face machined into the AN side for consistent sealing\u003c\/li\u003e\n  \u003cli\u003e7\/8-14 UNF thread matches standard 10AN male fittings\u003c\/li\u003e\n  \u003cli\u003e304 stainless resists corrosion that can compromise seals\u003c\/li\u003e\n  \u003cli\u003eRequires correct torquing and professional installation for reliable sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the strength and temperature limits for these stainless bungs?\u003c\/h3\u003e\n\n\u003cp\u003eThese fittings are built from 304 stainless steel and are rated to withstand system pressures up to 1000 PSI (68.94 bar). The operating temperature range covers many automotive and industrial applications, withstanding environments from below freezing to moderate heat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum pressure: 1000 PSI (68.94 bar)\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range: -65°F to 252°F\u003c\/li\u003e\n  \u003cli\u003eMaterial: corrosion-resistant 304 stainless steel for long service life\u003c\/li\u003e\n  \u003cli\u003eNot intended for temperatures or pressures beyond listed ratings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should these bungs be welded and prepared for use?\u003c\/h3\u003e\n\n\u003cp\u003eWelding these bungs into a tank or panel requires controlled heat input and good welding practice to preserve the machined sealing surface. After welding, allow the assembly to cool naturally for three hours before connecting AN fittings to avoid thermal distortion and ensure dimensional stability.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional welding recommended to protect the sealing face\u003c\/li\u003e\n  \u003cli\u003eAllow three hours of natural cooling after welding before use\u003c\/li\u003e\n  \u003cli\u003eInspect the 37° sealing surface for distortion or contamination prior to assembly\u003c\/li\u003e\n  \u003cli\u003eClean weld spatter and burrs that could interfere with the AN seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich thread and hose sizes are compatible with these bungs?\u003c\/h3\u003e\n\n\u003cp\u003eThe threaded section conforms to 7\/8-14 UNF, the standard thread for 10AN male fittings. This ensures direct compatibility with established AN hose ends and adapters commonly used in performance plumbing and custom fabrications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eThread size: 7\/8-14 UNF for 10AN fittings\u003c\/li\u003e\n  \u003cli\u003ePairs with standard 10AN hose ends, adapters, and swivel nuts\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with AN-style flared hose connections\u003c\/li\u003e\n  \u003cli\u003eConfirm mating part specifications before final assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The EVIL ENERGY Male 10AN weld-on bung fitting 2-pack is made for experienced fabricators, race-car builders, and custom vehicle technicians who need reliable, corrosion-resistant AN ports in tanks, radiators, or bulkheads. It's ideal when a permanent, pressure-rated AN connection is required and the installer can weld and prep the sealing face properly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I weld these bungs myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Professional welding is recommended; if you weld them yourself, ensure proper technique and allow three hours natural cooling before use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fittings fit these bungs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They accept 10AN fittings with 7\/8-14 UNF threads and seal on a 37° AN flare face.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48087039017118,"sku":"B089W25DHP","price":30.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/evil-energy-10an-front-view_2df91372-2c59-4bfa-8cea-4da5eecdfde3.jpg?v=1785914870","url":"https:\/\/northtrailauto.ca\/products\/evil-energy-male-10an-weld-on-bung-fitting-stainless-steel","provider":"North Trail Auto","version":"1.0","type":"link"}