{"product_id":"exerauo-boat-led-trailer-lights-kit-ip67-submersible-25ft-4-pin-harness-fully-sealed-waterproof","title":"EXERAUO Boat LED Trailer Lights Kit — IP67 Submersible, 25ft 4‑Pin Harness, Fully Sealed Waterproof","description":"\u003cstrong\u003eEXERAUO Boat LED Trailer Lights Kit is a fully sealed, IP67-rated LED lighting set with a 25-foot 4-pin wiring harness designed for reliable, low-power trailer illumination in wet conditions.\u003c\/strong\u003e\n\n\u003cp\u003eThis kit combines fully LED signal diodes, robust waterproofing and a long 25-foot wiring harness to keep your trailer lights visible and dependable whether launching a boat, towing a camper, or hauling equipment. The housings use epoxy-encapsulated electronics and sonic-sealed circuit boards so the lights resist water intrusion and continue functioning in rain, splashes and occasional submersion. All diodes are LED to reduce power draw while increasing brightness compared with incandescent bulbs.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this kit keep lights working in wet or submerged conditions?\u003c\/h3\u003e\n\u003cp\u003eThe light assemblies are built with epoxy-encapsulated electronics and sonic-sealed printed circuit boards, creating a welded seal around internal components. With an IP67 rating, the units tolerate immersion in shallow water and withstand driving through rain, splashes and trailer launching situations without shorting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEpoxy-encapsulated electronics for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSonic-sealed PCB board to block water ingress\u003c\/li\u003e\n  \u003cli\u003eWelded housing seams for extended durability\u003c\/li\u003e\n  \u003cli\u003eIP67-rated protection for temporary submersion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat wiring and connector setup does the kit use?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a 25-foot, 4-pin trailer wiring harness with thick PVC insulation and copper-clad aluminum conductors covered by a braided nylon outer sleeve for abrasion resistance. Wire color functions are labeled so installation is straightforward on most 12 V trailers and towing vehicles with a standard 4-pin connector.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e25FT 4-pin harness with reinforced PVC and nylon braid\u003c\/li\u003e\n  \u003cli\u003eWhite wire: chassis ground\u003c\/li\u003e\n  \u003cli\u003eLeft side: white+yellow for brake, white+brown for running\/license\u003c\/li\u003e\n  \u003cli\u003eRight side: white+green for brake, white+brown for running\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow bright and energy-efficient are the LEDs?\u003c\/h3\u003e\n\u003cp\u003eAll signal diodes are LED, which deliver higher luminous output while reducing current draw versus incandescent lamps. That means clearer brake and running light visibility at night and in poor weather without taxing the trailer’s or tow vehicle’s electrical system.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFull-LED diodes for brighter, crisper signals\u003c\/li\u003e\n  \u003cli\u003eLower power consumption than incandescent bulbs\u003c\/li\u003e\n  \u003cli\u003eNo filament to break—fewer failures from vibration\u003c\/li\u003e\n  \u003cli\u003eMeets DOT taillight requirements for visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow versatile is this kit for different trailers and vehicles?\u003c\/h3\u003e\n\u003cp\u003eDesigned for 12 V systems, the EXERAUO kit fits a wide range of trailers and vehicles commonly used for towing boats, campers, ATVs and work equipment. The lights are sized and positioned to cover trailers about 80 inches wide, and the harness length accommodates most coupler-to-connector distances.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with 12V boat trailers, RVs, campers, trucks, vans and more\u003c\/li\u003e\n  \u003cli\u003eSuitable for trailers approximately 80 inches wide\u003c\/li\u003e\n  \u003cli\u003e25-foot harness reduces the need for extensions\u003c\/li\u003e\n  \u003cli\u003eDurable materials for marine and road exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This EXERAUO Boat LED Trailer Lights Kit is aimed at boat owners, trailer owners and fleet operators who need dependable, water-resistant lighting for frequent launching, coastal or rainy-region towing, and anyone upgrading from incandescent trailer lights. It’s a practical choice for do-it-yourself installers who want clear wiring color codes, a long harness, and rugged, sealed LED assemblies that prioritize longevity and visibility without heavy power draw.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is this kit fully waterproof?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The lights use epoxy-encapsulated electronics and sonic-sealed PCBs with an IP67 rating for temporary submersion and heavy splash protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will it work with my 12V trailer and standard 4-pin connector?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The kit is designed for 12V systems and includes a 25-foot 4-pin harness compatible with standard trailer connectors.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EXERAUO","offers":[{"title":"Default Title","offer_id":48086772875422,"sku":"B0F8BG9D6H","price":64.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/exerauo-front-assembly-view.jpg?v=1785904476","url":"https:\/\/northtrailauto.ca\/products\/exerauo-boat-led-trailer-lights-kit-ip67-submersible-25ft-4-pin-harness-fully-sealed-waterproof","provider":"North Trail Auto","version":"1.0","type":"link"}