{"product_id":"faitio-12v-electric-fuel-transfer-pump-13-gpm-high-flow-200w-copper-motor-2-drum-fit-kit","title":"FAITIO 12V Electric Fuel Transfer Pump 13 GPM — High-Flow 200W Copper Motor, 2\" Drum Fit Kit","description":"\u003cp\u003e\u003cstrong\u003eFAITIO's 12V electric fuel transfer pump is a high-flow, self-priming 13 GPM kit designed to move diesel, kerosene, and similar fluids quickly and cleanly from 2\" drum bungs into tanks and equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis pump combines a rugged 200W copper motor rated at 4200 RPM with heavy-duty windings, a built-in mesh inlet filter, and a complete set of hoses and fittings so you can begin transferring fuel right away. It’s engineered to replace slow, manual siphoning and to eliminate the back-and-forth of hauling heavy barrels. The result is faster refueling, reduced spills, and dependable operation for farm, workshop, or jobsite use.\u003c\/p\u003e\n\n\u003ch3\u003eHow fast will this pump move fuel?\u003c\/h3\u003e\n\u003cp\u003eThe FAITIO transfer pump delivers up to 13 gallons per minute, which means an average 55-gallon drum can be emptied in roughly eight minutes under typical conditions. Peak flow depends on elevation, hose length, and fluid viscosity, but the upgraded 200W motor and 4200 RPM rating sustain steady output with fewer interruptions than lower-power units.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e13 GPM nominal flow rate — high-capacity for quick transfers\u003c\/li\u003e\n  \u003cli\u003eMoves a 55-gallon drum in about 8 minutes under normal conditions\u003c\/li\u003e\n  \u003cli\u003e200W copper motor at 4200 RPM for consistent, continuous pumping\u003c\/li\u003e\n  \u003cli\u003eBuilt for heavier fluids like diesel and kerosene\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat connections and accessories are included?\u003c\/h3\u003e\n\u003cp\u003eThe kit arrives as a ready-to-use assembly with both inlet and outlet hoses, an adjustable manual nozzle, and mounting hardware so you won’t need additional parts. The inlet hose fits typical 2\" drum bungs and a mesh filter at the intake helps prevent debris from entering the pump, reducing clogs and wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFits 2\" drum bungs for direct barrel installation\u003c\/li\u003e\n  \u003cli\u003eIncludes 4.9 ft inlet hose and 6.6 ft outlet hose (11.5 ft total)\u003c\/li\u003e\n  \u003cli\u003eAdjustable manual nozzle for controlled stop\/start and precise filling\u003c\/li\u003e\n  \u003cli\u003eMounting hardware and built-in mesh filter for clean reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCan I use this for tractors, generators, and other equipment?\u003c\/h3\u003e\n\u003cp\u003eYes — the pump is suitable for drum-to-tank refueling of vehicles, generators, farm equipment, and other machinery that accept diesel, kerosene, or similar non-corrosive petroleum-based fluids. The self-priming design means you don’t have to pre-fill the lines, and the 12V power connection makes it simple to run from a vehicle battery or dedicated 12V source on-site.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWorks with diesel, kerosene, transformer oil, and comparable fluids\u003c\/li\u003e\n  \u003cli\u003eSelf-priming — no manual siphon required\u003c\/li\u003e\n  \u003cli\u003e12V power for battery or vehicle-based operation\u003c\/li\u003e\n  \u003cli\u003eStrong lift and length to reach elevated tanks or fixed refueling points\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and serviceable is the pump?\u003c\/h3\u003e\n\u003cp\u003eFAITIO designed the pump for frequent use with a professional-grade build: a copper-wound motor and heavy-duty internal components resist overheating and premature failure. Regular cleaning of the mesh filter and following recommended fuel-handling precautions will prolong service life and maintain peak performance.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUpgraded 200W copper motor and heavy windings for longevity\u003c\/li\u003e\n  \u003cli\u003eBuilt-in mesh filter reduces debris-related wear and clogs\u003c\/li\u003e\n  \u003cli\u003eRobust hoses and manual nozzle rated for repeated industrial use\u003c\/li\u003e\n  \u003cli\u003eMounting hardware included for secure, stable installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The FAITIO Electric Fuel Transfer Pump is aimed at serious DIYers, farmers, fleet operators, and tradespeople who need a fast, dependable way to transfer fuel without lifting heavy barrels or using messy siphons. If you regularly refill tractors, generators, or multiple vehicles and want an out-of-the-box 12V solution with pro-grade components and a high flow rate, this pump is built for that workload.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this pump require priming before use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No — the FAITIO pump is self-priming and starts pumping directly from a 2\" drum bung without manual siphoning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fluids can I transfer with this pump?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It handles diesel, kerosene, transformer oil, and similar petroleum-based fluids, but avoid corrosive or highly viscous liquids.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"FAITIO","offers":[{"title":"Default Title","offer_id":48080943022238,"sku":"B0FVS1CZ36","price":94.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/faitio-front-view-pump_595e7ab3-6367-461b-95ad-07f4a11660a1.jpg?v=1785793008","url":"https:\/\/northtrailauto.ca\/products\/faitio-12v-electric-fuel-transfer-pump-13-gpm-high-flow-200w-copper-motor-2-drum-fit-kit","provider":"North Trail Auto","version":"1.0","type":"link"}