{"product_id":"fender-flare-seal-gasket-edge-trim","title":"Fender Flare Seal Gasket \u0026 Edge Trim","description":"\u003cstrong\u003esdano’s 18-foot T-style fender flare seal gasket is a flexible EPDM rubber edge trim with automotive-grade acrylic foam tape that protects wheel wells, reduces vibration and creates a clean line between flare and body.\u003c\/strong\u003e\n\n\u003cp\u003eIf you’re fitting aftermarket fender flares, replacing worn trim, or simply want to shield paint and seams from debris, this 18' T-profile edge trim offers a durable, weather-resistant barrier. Made from ozone- and weather-resistant EPDM rubber and supplied with strong acrylic foam adhesive, the gasket creates a sealed interface that reduces rubbing, prevents pinched stones, and improves finish appearance along wheel arches.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this seal trim protect my vehicle’s paint and flare edges?\u003c\/h3\u003e\n\u003cp\u003eThe T-style profile slips between the flare and the vehicle body to form a cushioning layer that isolates vibration and reduces direct contact. That barrier prevents abrasive wear, stops stones from getting pinched, and keeps dirt from abrading the paint along the seam.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM rubber absorbs movement and resists cracking.\u003c\/li\u003e\n  \u003cli\u003eCreates a soft buffer to reduce friction between surfaces.\u003c\/li\u003e\n  \u003cli\u003ePrevents rocks and debris from catching between flare and body.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this 18-foot gasket fit my truck or SUV fender flares?\u003c\/h3\u003e\n\u003cp\u003eAn 18-foot length covers many single-fender runs, but vehicle models vary widely. It’s a good match for one or two flares on most cars and many trucks; however, four full fenders on larger SUVs or trucks may need more material.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMeasure your flare perimeters before ordering to confirm coverage.\u003c\/li\u003e\n  \u003cli\u003eIf you have four large wheel arches, consider the 30-foot option.\u003c\/li\u003e\n  \u003cli\u003eTrim with a razor at tight 90° corners for a neat, wrinkle-free finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is it to install and what preparation is required?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward thanks to the pre-applied acrylic foam adhesive tape. Surface prep is essential: clean and dry the flare and vehicle body thoroughly so the tape bonds strongly and the trim lays flat.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eClean surfaces of dust, oil, and moisture before applying.\u003c\/li\u003e\n  \u003cli\u003ePeel backing from the adhesive foam tape and press firmly along the seam.\u003c\/li\u003e\n  \u003cli\u003eMake relief cuts at sharp angles to avoid wrinkling the thicker T-profile.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat material qualities should I expect from EPDM rubber used here?\u003c\/h3\u003e\n\u003cp\u003eEPDM is chosen for automotive trims because it stays flexible over a wide temperature range and resists weathering. The gasket maintains shape and adhesion in sun, rain, and road-salt conditions without becoming brittle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWeather- and ozone-resistant for long outdoor life.\u003c\/li\u003e\n  \u003cli\u003eFlexible enough to conform to curved and irregular edges.\u003c\/li\u003e\n  \u003cli\u003ePaired with acrylic foam tape for vibration-damping bond strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: sdano’s 18' fender flare seal gasket is aimed at DIY installers, automotive detailers, and vehicle owners fitting aftermarket flares who want a durable, vibration-isolating edge trim. Choose this part if you need a weather-resistant EPDM seal with strong adhesive backing for neater lines and extra protection; choose a longer 30' roll if you need full coverage for all four wheel wells on larger trucks or SUVs. Follow the surface-prep and corner-trimming notes during installation to achieve clean seams and lasting adhesion.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I cut the trim to fit tight corners?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Trim the T-profile at 90° corners with a razor to prevent wrinkling and create a seamless fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the adhesive stick to painted surfaces?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, when surfaces are clean and dry. Prep by removing dust, oil, and moisture for optimal bonding.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"sdano","offers":[{"title":"Default Title","offer_id":48086875340958,"sku":"B0CNKCFR8N","price":33.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/sdano-fender-flare-seal-front-packaging.jpg?v=1785908701","url":"https:\/\/northtrailauto.ca\/products\/fender-flare-seal-gasket-edge-trim","provider":"North Trail Auto","version":"1.0","type":"link"}