{"product_id":"funmit-washer-suspension-rod-kit-w10780045-for-whirlpool-amana-26-7in-4-pack-with-upgraded-springs-and-coated-metal","title":"Funmit Washer Suspension Rod Kit W10780045 for Whirlpool\/Amana 26.7in — 4-Pack with Upgraded Springs and Coated Metal","description":"\u003cp\u003e\u003cstrong\u003eFunmit W10780045 washer suspension rod kit is a four-piece replacement set that stabilizes top-load tubs and reduces spin-cycle vibration for compatible Whirlpool, Kenmore, Amana and similar washers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis suspension rod kit replaces worn or broken shock\/damper rods that let a washer tub sag, shake or trigger unbalanced-load error codes. The kit includes four rods, ball housings and balls, and is constructed from stainless steel, ABS plastic and silica components with a coated finish and upgraded springs. Before ordering, compare the rods to your originals (approximately 26.7 inches) and confirm your machine model number to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eHow will this kit affect noisy or vibrating spin cycles?\u003c\/h3\u003e\n\n\u003cp\u003eReplacing damaged suspension rods restores the tub’s support and dampens side-to-side movement during high-speed spins, which reduces noise and vibration. Restoring proper suspension helps the washer run smoothly and prevents repetitive stress on other parts.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStabilizes the tub to minimize shaking and loud thumps.\u003c\/li\u003e\n  \u003cli\u003eUpgraded springs and brackets hold performance at high RPMs.\u003c\/li\u003e\n  \u003cli\u003eCoated metal parts resist rust and wear for longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich washer models and brands are compatible with W10780045?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit fits many Whirlpool-family and similar top-load models, including numerous Whirlpool, Kenmore, Amana, Crosley, Maytag, Admiral, Inglis and Roper machines. Use your washer’s model number (found on the door opening or control panel) to match compatibility. Contact Funmit support if you’re unsure; they typically reply within 24 hours.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCommon compatible model series: NTW, WTW, WET and many others listed by the manufacturer.\u003c\/li\u003e\n  \u003cli\u003eReplaces OEM part numbers such as 4282746, AP5971396 and W10537442 variants.\u003c\/li\u003e\n  \u003cli\u003eRods measure roughly 26.7 inches—verify against your originals before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the package and what tools are required to install it?\u003c\/h3\u003e\n\n\u003cp\u003eThe Funmit kit contains four suspension rods, four balls and four ball housings—everything needed for a standard swap on a four-rod system. Installation is straightforward for a person comfortable with basic hand tools, but always disconnect power and water first for safety.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncluded: 4 rods, 4 balls, 4 ball housings—complete replacement kit.\u003c\/li\u003e\n  \u003cli\u003eSuggested tools: Phillips screwdriver, putty knife, duct tape or strap, and gloves.\u003c\/li\u003e\n  \u003cli\u003eInstallation help: manufacturer videos and customer support are available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill replacing these rods fix an error code or balance issue?\u003c\/h3\u003e\n\n\u003cp\u003eIf your machine shows unbalanced-load errors (UL\/UD\/UR types) or the tub visibly sags on one side, replacing failed suspension rods often resolves the problem. The kit helps reestablish proper tub alignment and reduces the likelihood of recurring balance faults, but diagnostics should rule out other causes first.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHelpful for UL-style unbalance codes often caused by bad suspension rods.\u003c\/li\u003e\n  \u003cli\u003eReduces repeated vibration that can trigger error codes and shutdowns.\u003c\/li\u003e\n  \u003cli\u003eIf problems persist after replacement, inspect springs, spiders and mounts too.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: This Funmit W10780045 kit is designed for homeowners, DIY repairers and appliance technicians replacing worn suspension rods on top-load washers in the Whirlpool family and compatible brands. Choose this kit when your washer tub moves excessively, you hear banging or thumping during spins, or the machine displays repeated unbalance errors—provided your model number and rod length match the kit specifications.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do I know if my washer needs these suspension rods?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: If the tub sags, shakes loudly in spin, or the washer shows unbalanced-load errors, the suspension rods may be failing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are tools and hardware included in the kit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes four rods, four balls and four housings; basic tools such as a screwdriver are not included.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Funmit","offers":[{"title":"Default Title","offer_id":48085905670302,"sku":"B08BNVT3B9","price":48.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/funmit-w10780045-front-packaging.jpg?v=1785880311","url":"https:\/\/northtrailauto.ca\/products\/funmit-washer-suspension-rod-kit-w10780045-for-whirlpool-amana-26-7in-4-pack-with-upgraded-springs-and-coated-metal","provider":"North Trail Auto","version":"1.0","type":"link"}