{"product_id":"gasupply-atv-4x110-wheel-spacers-2-inch-black-aluminum-74mm-hub-bore-m10x1-25-studs-2-pack","title":"GAsupply ATV 4x110 Wheel Spacers 2-inch Black Aluminum, 74mm Hub Bore, M10x1.25 Studs (2-Pack)","description":"\u003cp\u003e\u003cstrong\u003eGAsupply 2-inch 4x110 ATV wheel spacers adapt 4×110 hubs with a 74mm bore to provide wider track spacing and allow fitment of larger tires while using M10x1.25 studs.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese black anodized aluminum spacers are engineered to sit between your ATV hub and wheel, moving the wheel outward by 2 inches per side to increase clearance and change wheel stance. Machined from 6061-T6 billet and fitted with high-strength 12.9 bolts, the pair is intended for machines that use a 4×110 bolt pattern, a hub bore no greater than 74mm, and 10×1.25 wheel studs. They offer a corrosion-resistant finish and are sold as a two-piece set for front or rear axle use.\u003c\/p\u003e\n\n\u003ch3\u003eWill these spacers fit my ATV hub and wheels?\u003c\/h3\u003e\n\u003cp\u003eThey are designed specifically for hubs with a 4×110 bolt pattern and a maximum center bore of 74mm, and they require wheels with M10x1.25 studs. Confirm your vehicle’s bolt pattern, hub bore, and wheel stud size before ordering to ensure compatibility.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBolt pattern: 4×110 mm only.\u003c\/li\u003e\n  \u003cli\u003eHub bore: must be 74 mm or smaller.\u003c\/li\u003e\n  \u003cli\u003eWheel stud thread pitch: 10×1.25 mm (not compatible with 12×1.25).\u003c\/li\u003e\n  \u003cli\u003eSold as a 2-piece kit — one spacer per wheel used.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow will a 2-inch spacer affect ride and clearance?\u003c\/h3\u003e\n\u003cp\u003eA 2-inch spacer widens the track by pushing the wheel outward, creating more room between the tire and suspension or chassis. This can allow larger or wider tires and can improve stability at lower speeds, though it also slightly changes scrub radius and steering feel.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreases lateral clearance for bigger tires and aggressive treads.\u003c\/li\u003e\n  \u003cli\u003eProduces a wider stance for improved low-speed stability.\u003c\/li\u003e\n  \u003cli\u003eMay alter steering feedback and wheel alignment — check alignment after installation.\u003c\/li\u003e\n  \u003cli\u003eUse only where the vehicle and wheel geometry safely permit the added offset.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat materials and fasteners are used, and why does that matter?\u003c\/h3\u003e\n\u003cp\u003eGAsupply spacers are CNC-machined from 6061-T6 aluminum, chosen for its high strength-to-weight ratio and resistance to deformation. Each spacer comes with grade 12.9 bolts pre-installed for secure clamping, and an anodized surface treatment adds protection against corrosion and wear.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBody material: 6061-T6 aluminum billet for strength and reduced weight.\u003c\/li\u003e\n  \u003cli\u003eFasteners: high-strength 12.9 grade bolts pre-installed for secure fitment.\u003c\/li\u003e\n  \u003cli\u003eFinish: anodized coating helps resist rust and fading over time.\u003c\/li\u003e\n  \u003cli\u003ePrecision CNC machining ensures concentricity and fit to the hub bore.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I install and maintain these spacers?\u003c\/h3\u003e\n\u003cp\u003eInstallation should follow manufacturer torque settings and wheel-stud specifications. Re-torque wheel fasteners after initial use and inspect periodically for proper tightness and surface condition. If you’re unsure about fitment or installation, consult a qualified mechanic.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFollow vehicle-specific torque specs for spacer and wheel bolts.\u003c\/li\u003e\n  \u003cli\u003eRe-check torque after the first few miles and at regular intervals.\u003c\/li\u003e\n  \u003cli\u003eKeep mating surfaces clean and free of corrosion for accurate seating.\u003c\/li\u003e\n  \u003cli\u003eContact GAsupply support if you need fitment assistance or have questions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this product for? Riders who want to fit wider or taller tires, increase wheel clearance, or achieve a broader stance on ATVs that use a 4×110 bolt pattern will find these spacers useful. They suit owners of compatible Honda, Suzuki, Bombardier, and other ATVs that meet the hub-bore and stud-size requirements. These spacers are ideal for DIY-savvy enthusiasts who will follow torque and safety procedures, or for mechanics installing a two-piece spacer kit to alter wheel offset safely.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do these spacers fit all ATVs?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: They only fit ATVs with a 4×110 bolt pattern, hub bore ≤74mm, and M10x1.25 wheel studs. Not compatible with 12×1.25 studs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I install them myself?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, if you follow torque specs and safety checks. Otherwise have a mechanic install and re-torque after initial use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GAsupply","offers":[{"title":"Default Title","offer_id":48080940236958,"sku":"B09TVTF9RB","price":78.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/gasupply-front-view-wheel-spacers-pack.jpg?v=1785792951","url":"https:\/\/northtrailauto.ca\/products\/gasupply-atv-4x110-wheel-spacers-2-inch-black-aluminum-74mm-hub-bore-m10x1-25-studs-2-pack","provider":"North Trail Auto","version":"1.0","type":"link"}