{"product_id":"gearoll-harmonic-balancer-puller-kit-adjustable-3-jaw-black-oxide-fits-gm-chevy-v8s","title":"GEAROLL Harmonic Balancer Puller Kit — Adjustable 3-Jaw, Black Oxide, Fits GM\/Chevy V8s","description":"\u003cp\u003e\u003cstrong\u003eGEAROLL's adjustable 3-jaw harmonic balancer puller kit is a complete extractor set designed to remove pressed-on harmonic dampers quickly and safely without dismantling surrounding components.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhether you are a professional mechanic or a home garage DIYer, this kit delivers a robust, adaptable solution for pulling harmonic balancers and dampers on a wide range of V8, I6, I5 and I4 engines. The set combines durable, heat-treated steel components with six interchangeable jaws and multiple forcing rods so you can tailor the tool to older and newer engine designs. It saves time by letting you remove the balancer using the center-retaining bolt, avoiding radiator or accessory removal in many applications.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this puller remove a harmonic balancer without extra disassembly?\u003c\/h3\u003e\n\n\u003cp\u003eThe GEAROLL puller uses a center forcing screw that presses against the crank snout while the adjustable jaws hook behind the balancer. Tightening the forcing screw draws the balancer straight off the crankshaft using an axial pull, which minimizes interference with radiators, brackets, or other components.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSingle center retainer bolt operation for direct axial extraction.\u003c\/li\u003e\n  \u003cli\u003eAdjustable jaws reach behind pressed-on dampers for secure grip.\u003c\/li\u003e\n  \u003cli\u003eMultiple forcing rod lengths to accommodate deep or recessed hubs.\u003c\/li\u003e\n  \u003cli\u003eLess need to remove radiator or accessories on many engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat vehicles and engine types will this kit fit?\u003c\/h3\u003e\n\n\u003cp\u003eThis upgraded kit is designed for broad coverage across GM, Chevrolet, Cadillac, Ford and other common makes, as well as some Mitsubishi applications. The kit’s mix of thick and thin jaws lets it adapt to both older balancers and modern, thinner designs.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGM: 5.7L V8 and many 2000+ 4.8L \/ 5.3L \/ 5.7L \/ 6.0L \/ 8.1L V8 engines.\u003c\/li\u003e\n  \u003cli\u003eCadillac: compatible with 4.5L, 4.6L, 4.9L V8 models.\u003c\/li\u003e\n  \u003cli\u003eChevrolet trucks: various 4.2L I6 (2003+), 3.5L I5 (2004+), 2.8L I4 (2005+).\u003c\/li\u003e\n  \u003cli\u003eFord V8 engines (1995+), Mitsubishi Eclipse 2.0L DOHC non-turbo (1995+).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and reliable are the components in this set?\u003c\/h3\u003e\n\n\u003cp\u003eGEAROLL manufactures the puller and forcing rods from high-hardness steel and finishes them with black oxide for corrosion resistance. The kit is built for repeated use in workshop environments, offering longevity and mechanical strength under heavy loads.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeat-treated, high-hardness steel construction for strength.\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish helps resist rust and wear in garages.\u003c\/li\u003e\n  \u003cli\u003eReplaceable jaws let you switch from thicker to thinner sets for different balancers.\u003c\/li\u003e\n  \u003cli\u003eForcing screw and rods sized to handle typical crankshaft loads safely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat comes in the box and how do the parts work together?\u003c\/h3\u003e\n\n\u003cp\u003eThe kit is packaged to be ready for immediate use and organized for storage. Two 3-jaw assemblies (one installed, one replaceable), four forcing rods of varying lengths, and a central forcing screw cover most installation scenarios for passenger cars and light trucks.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1 x 3-jaw puller assembled and 1 x interchangeable 3-jaw set.\u003c\/li\u003e\n  \u003cli\u003e4 x forcing rods: 100 mm, 135 mm, 165 mm, 185 mm for reach options.\u003c\/li\u003e\n  \u003cli\u003e3\/8\" drive forcing screw approximately 90 mm for center thrust.\u003c\/li\u003e\n  \u003cli\u003eCompact storage case keeps pieces organized and protected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis tool simplifies harmonic balancer removal while protecting the balancer and crank nose. Proper setup and even force application are important to avoid damage—use the correct jaw orientation and forcing rod length for your application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e The GEAROLL Harmonic Balancer Puller Kit is aimed at professional mechanics, automotive technicians, and experienced DIY enthusiasts who work on American and common imported engines. It’s especially useful for shops and home garages that need a versatile, durable extractor to handle both older and modern engine dampers without time-consuming disassembly.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can this puller remove balancers without taking out the radiator?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—its center forcing screw design lets you extract many balancers without removing the radiator or nearby accessories.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are replacement jaws or rods included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit includes a second interchangeable 3-jaw set and four forcing rods of different lengths for flexibility.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GEAROLL","offers":[{"title":"Default Title","offer_id":48085624586398,"sku":"B0CSDDTZFT","price":49.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/gearoll-front-packaging-and-tools.jpg?v=1785875139","url":"https:\/\/northtrailauto.ca\/products\/gearoll-harmonic-balancer-puller-kit-adjustable-3-jaw-black-oxide-fits-gm-chevy-v8s","provider":"North Trail Auto","version":"1.0","type":"link"}