{"product_id":"gooacc-4-inch-led-round-tail-lights-white-pair-stainless-steel-chrome-bezel-ip65-dual-brightness","title":"GOOACC 4-inch LED Round Tail Lights White Pair — Stainless Steel Chrome Bezel, IP65 Dual-Brightness","description":"\u003cp\u003e\u003cstrong\u003eGOOACC 4-inch round LED tail lights are a sealed, stainless-steel-bezel pair that deliver bright white illumination for reverse, tail, or daytime running-light applications on 12V vehicle systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThese compact, surface-mount lights combine 24 high-efficiency 2835 SMD LEDs with a corrosion-resistant chrome bezel and impact-resistant housing to provide reliable, weatherproof performance for trailers, trucks, tractors and specialty vehicles. Designed for straightforward installation and long-term outdoor use, the set includes two matching lights with mounting hardware and is rated IP65 against water intrusion.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright and versatile are these LEDs for reverse or running-light use?\u003c\/h3\u003e\n\n\u003cp\u003eThe fixtures use 24pcs 2835 SMD LEDs each and offer two brightness levels so the same unit can serve as a high-output reverse light or a lower-intensity running\/taillight. The LEDs produce a clean white beam that improves visibility while minimizing power draw compared with older filament lamps.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e24 x 2835 SMD LEDs per lamp for strong, even white output\u003c\/li\u003e\n  \u003cli\u003eTwo illumination modes: high brightness and low brightness\u003c\/li\u003e\n  \u003cli\u003eSuitable for reverse, tail, or daytime running-light functions\u003c\/li\u003e\n  \u003cli\u003eDesigned for 12V DC vehicle electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat makes the construction durable for outdoor and rough-duty use?\u003c\/h3\u003e\n\n\u003cp\u003eMaterials were selected to resist corrosion and impact: a stainless-steel chrome bezel reduces rusting and helps with secure mounting, while the AS lens and ABS back shell resist shocks and everyday wear. The lights are fully sealed against moisture and dust to extend service life in harsh environments.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eStainless steel chrome bezel for rust resistance and firmer installation\u003c\/li\u003e\n  \u003cli\u003eImpact-resistant AS lens and ABS bottom shell\u003c\/li\u003e\n  \u003cli\u003eIP65-rated sealing prevents water ingress in rainy conditions\u003c\/li\u003e\n  \u003cli\u003eDesigned to withstand road vibration and debris exposure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow simple is the installation and what are the mounting requirements?\u003c\/h3\u003e\n\n\u003cp\u003eInstallation is straightforward for surface-mount applications: each light ships with three screws and matching nuts to secure it, and the wiring connects to a 12V source. Prepare the specified hole and depth, fasten the hardware, then complete the electrical connections.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eSupplied hardware: 3 screws and 3 nuts per light for secure attachment\u003c\/li\u003e\n  \u003cli\u003eRecommended hole size for surface mounting: 4.4-inch diameter\u003c\/li\u003e\n  \u003cli\u003eRequired mounting depth: 2.17 inches to accommodate the housing\u003c\/li\u003e\n  \u003cli\u003eConnect to a 12V DC system following vehicle wiring conventions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill these lights resist water and perform in severe weather?\u003c\/h3\u003e\n\n\u003cp\u003eThe product carries an IP65 rating, meaning it is protected from low-pressure water jets and dust ingress, which makes it suitable for rain, road spray and normal outdoor exposure. The sealed design blocks water vapor from entering the optic and electronics, helping preserve LED performance over time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIP65 waterproof rating for rain and road spray protection\u003c\/li\u003e\n  \u003cli\u003eHigh-seal construction prevents moisture accumulation inside the lens\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant bezel reduces long-term degradation\u003c\/li\u003e\n  \u003cli\u003eReliable for use on trailers, trucks, and various utility vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The GOOACC 4-inch round LED set is built for fleet owners, trailer builders, agricultural and construction vehicle operators, and DIY mechanics who need a compact, durable, bright white reverse or running light that installs quickly and stands up to outdoor conditions. If you need a corrosion-resistant bezel, sealed housing, and two-stage brightness in a surface-mount 4-inch fixture for any 12V vehicle application, this pair offers a practical, long-lasting option.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are these lights compatible with a 12V trailer system?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The GOOACC lights are designed for 12V DC systems and work as reverse, tail, or daytime running lights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What mounting hole size and depth do I need?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: For surface mounting prepare a 4.4-inch diameter hole with about 2.17 inches of depth to fit the housing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"GOOACC","offers":[{"title":"Default Title","offer_id":48085569568926,"sku":"B0CLZXK1ND","price":40.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/gooacc-front-facing-round-tail-light-pair.jpg?v=1785873546","url":"https:\/\/northtrailauto.ca\/products\/gooacc-4-inch-led-round-tail-lights-white-pair-stainless-steel-chrome-bezel-ip65-dual-brightness","provider":"North Trail Auto","version":"1.0","type":"link"}