{"product_id":"haturmyko-3-inch-id-90-silicone-elbow-coupler-8-inch-leg-length-4-layer-reinforced","title":"Haturmyko 3-inch ID 90° Silicone Elbow Coupler — 8-inch Leg Length, 4‑Layer Reinforced","description":"\u003cp\u003e\u003cstrong\u003eHaturmyko's ID 3-inch 90° silicone elbow coupler is a reinforced, flexible 8-inch leg hose designed to connect intercoolers, turbo piping, radiator lines and intake systems where a durable 90° bend is required.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis heavy‑duty silicone elbow combines a 3\" (76mm) internal diameter with 8\" (203mm) leg lengths and a 0.2\" (5mm) wall thickness to offer a reliable transition in tight engine bays. Built from a four‑layer reinforced silicone construction, it balances flexibility and strength for use in turbo, intercooler, and cooling system applications. The part is engineered to tolerate wide temperature swings and significant internal pressure while maintaining shape and sealing integrity.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this silicone elbow perform under heat and pressure?\u003c\/h3\u003e\n\u003cp\u003eThe Haturmyko 3\" 90° silicone elbow is rated for extreme temperature ranges and can withstand moderate internal pressures without bursting. Its multi‑layer reinforcement helps resist deformation and collapse under boost or vacuum conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eOperating temperature range: approximately -60°C to 300°C (-76°F to 572°F).\u003c\/li\u003e\n  \u003cli\u003eLow temperature performance down to about -40°C for increased flexibility in cold environments.\u003c\/li\u003e\n  \u003cli\u003eBurst resistance around 1 MPa for common turbo and cooling system pressures.\u003c\/li\u003e\n  \u003cli\u003e0.2\" (5mm) wall thickness adds durability against rubbing and engine bay abrasion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this fit my intercooler or turbo setup?\u003c\/h3\u003e\n\u003cp\u003eThe coupler has a 3\" inner diameter and 8\" leg lengths, making it compatible with systems that require a 90° 3\" transition. It’s intended as a universal silicone elbow for many aftermarket and factory piping configurations, but you should confirm clamp sizes and clearances before installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 3\" (76mm) — standard for many performance piping systems.\u003c\/li\u003e\n  \u003cli\u003eLeg length: 8\" (203mm) — provides reach for tight routing while allowing trimming if necessary.\u003c\/li\u003e\n  \u003cli\u003eWorks for intercooler, turbo inlet\/outlet, radiator hose, and intake or exhaust transitions.\u003c\/li\u003e\n  \u003cli\u003eUse appropriate hose clamps and check neighboring components for clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow durable and flexible is the 4-layer silicone construction?\u003c\/h3\u003e\n\u003cp\u003eThe four-layer reinforced structure delivers a durable outer shell, internal strength layers and resilient silicone for reliable flexing. That construction resists tearing and deformation from repeated pressure cycles and heat exposure while maintaining flexibility for installation in confined spaces.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eReinforced layers prevent bulging under boost and reduce the risk of blowouts.\u003c\/li\u003e\n  \u003cli\u003eSilicone outer layer resists oil, coolant, and common engine bay contaminants.\u003c\/li\u003e\n  \u003cli\u003eDesigned to tolerate repeated bending during fitment without cracking.\u003c\/li\u003e\n  \u003cli\u003eModerate wall thickness helps resist abrasion from contact with brackets or pipes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I know before installing this elbow hose?\u003c\/h3\u003e\n\u003cp\u003ePreparation and correct clamp selection ensure a secure, leak‑free installation. Trim leg lengths only if needed, check mating pipe diameters, and avoid over‑tightening clamps which can cut into the silicone.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eVerify the 3\" ID matches the mating pipes and use matching clamps.\u003c\/li\u003e\n  \u003cli\u003eIf trimming legs, make clean straight cuts and deburr edges before fitting.\u003c\/li\u003e\n  \u003cli\u003eUse worm‑drive or T‑bolt clamps sized for silicone hoses to prevent slippage.\u003c\/li\u003e\n  \u003cli\u003eInspect for clearance to hot components and reroute or shield if necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Haturmyko’s 3\" 90° silicone elbow is aimed at DIY tuners, performance shops, and vehicle owners upgrading intercooler, turbo, or cooling plumbing who need a robust, heat‑tolerant 90° transition. It’s a practical choice when a fixed‑angle silicone coupler with reinforced walls and generous leg length is required for routing in constrained engine compartments. Always confirm measurements and system requirements before purchase to ensure compatibility.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the exact dimensions of this elbow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Inner diameter 3\" (76mm), leg lengths 8\" (203mm), wall thickness 0.2\" (5mm).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use it for turbo or intercooler piping?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes — it's designed for intercooler, turbo inlet\/outlet and radiator or intake transitions; confirm pipe diameters and clamp sizes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Haturmyko","offers":[{"title":"Default Title","offer_id":48086426550430,"sku":"B0D2RMMPGV","price":49.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/haturmyko-front-view-3-inch-90-elbow.jpg?v=1785898305","url":"https:\/\/northtrailauto.ca\/products\/haturmyko-3-inch-id-90-silicone-elbow-coupler-8-inch-leg-length-4-layer-reinforced","provider":"North Trail Auto","version":"1.0","type":"link"}