{"product_id":"haturmyko-id-1-25-inch-90-degree-silicone-elbow-coupler","title":"Haturmyko ID 1.25 inch 90 Degree Silicone Elbow Coupler","description":"\u003cp\u003e\u003cstrong\u003eHaturmyko 1.25 inch 90° silicone elbow coupler is a reinforced, high-temperature flexible hose with 7\" legs designed to connect intercooler, intake, turbo or coolant lines.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis reinforced silicone elbow joins two 1.25\" (32 mm) pipes at a right angle while offering thick walls and a four-layer construction built for repeated thermal cycling and pressure changes. Its 7\" (178 mm) leg length gives installers room to align fittings; the 0.2\" (5 mm) wall thickness provides structural support without sacrificing flexibility. The part is supplied as a single 90° silicone hose ready for vehicle or industrial plumbing use.\u003c\/p\u003e\n\n\u003ch3\u003eHow does this elbow handle heat and pressure in engine bays?\u003c\/h3\u003e\n\u003cp\u003eThe Haturmyko elbow is engineered from pure silicone with reinforced layers to withstand wide temperature swings and sustained pressure. It holds up in extreme hot and cold conditions and resists burst under high boost levels that occur in forced-induction systems.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTemperature tolerance: rated from -60°C to 300°C for material integrity\u003c\/li\u003e\n  \u003cli\u003eLow-end operational range noted at -40°C to 60°C for pliability\u003c\/li\u003e\n  \u003cli\u003eBurst strength: spec’d at or above 6 kV equivalent burst pressure testing\u003c\/li\u003e\n  \u003cli\u003eFour-layer reinforcement improves durability against collapse and kinking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill it fit my intake, intercooler, or radiator hoses?\u003c\/h3\u003e\n\u003cp\u003eThis elbow is sized to mate with 1.25\" (32 mm) pipe ends and works as a universal coupler for many automotive and industrial hose connections. It’s commonly used on turbo inlet\/outlet runs, intercooler piping, radiator transitions, and other plumbing where a 90° bend is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInternal diameter: 1.25\" (32 mm) nominal to match matching tubing\u003c\/li\u003e\n  \u003cli\u003eLeg length: 7\" (178 mm) provides reach for clamps and slight misalignment\u003c\/li\u003e\n  \u003cli\u003eThick walls: 0.2\" (5 mm) to resist pinch or blowout under pressure\u003c\/li\u003e\n  \u003cli\u003eSingle-piece design: reduces leak points compared with assembled elbows\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and what accessories do I need?\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward: slide the hose onto the mating pipes and secure with appropriately sized hose clamps. The silicone’s flexibility eases routing around tight corners, but choose clamps that match the 1.25\" inner diameter and leave enough bead engagement on each leg.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eUse band or worm-drive clamps sized for 1.25\" ID fittings\u003c\/li\u003e\n  \u003cli\u003eLubricate ends lightly with soapy water for smoother assembly\u003c\/li\u003e\n  \u003cli\u003eTrim ends only if necessary to maintain minimum leg engagement\u003c\/li\u003e\n  \u003cli\u003eInspect for abrasion points and provide heat shielding if near exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the physical specs and what comes in the box?\u003c\/h3\u003e\n\u003cp\u003eThe elbow features a 1.25\" internal diameter, 7\" legs, and 0.2\" wall thickness in a single reinforced silicone piece. It ships as one 90° silicone elbow; clamps and additional fittings are not included unless specified by the retailer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInner diameter: 1.25 inch (32 mm)\u003c\/li\u003e\n  \u003cli\u003eLeg length: 7 inch (178 mm) per side\u003c\/li\u003e\n  \u003cli\u003eWall thickness: 0.2 inch (5 mm)\u003c\/li\u003e\n  \u003cli\u003ePackage: 1 x 90° silicone elbow coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? Automotive enthusiasts, tuners, and mechanics who need a compact, resilient 90° coupler for intake, turbo, intercooler, or coolant applications will find this Haturmyko elbow useful. It’s suited for retrofit work, custom piping, or routine replacement where a robust silicone elbow with defined leg length and wall strength is required. If you need clamps or bespoke lengths, plan to buy those separately.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the inner diameter and leg length of this elbow?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The coupler has a 1.25 inch (32 mm) inner diameter and each leg measures 7 inches (178 mm).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the package include clamps?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No, the package contains one 90° silicone elbow only; clamps and fittings are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Haturmyko","offers":[{"title":"Default Title","offer_id":48087670849694,"sku":"B0D8VK59QC","price":34.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/haturmyko-front-view-elbow-coupler.jpg?v=1785928309","url":"https:\/\/northtrailauto.ca\/products\/haturmyko-id-1-25-inch-90-degree-silicone-elbow-coupler","provider":"North Trail Auto","version":"1.0","type":"link"}