{"product_id":"hisport-knock-sensor-harness-kit-for-toyota-lexus-89615-06010-direct-fit-replacement-oem-style","title":"HiSport Knock Sensor \u0026 Harness Kit for Toyota\/Lexus 89615-06010 Direct-Fit Replacement, OEM-Style","description":"\u003cstrong\u003eThe HiSport 89615-B6010 is a replacement knock sensor and wiring harness kit designed to restore correct engine knock detection and fit Toyota and Lexus models that require part 89615-06010 \/ 89615-20090.\u003c\/strong\u003e\n\n\u003cp\u003eThis complete sensor-and-harness assembly replaces original equipment knock sensor units on multiple Toyota and Lexus applications. The kit is manufactured to match OEM dimensions and connector types so it installs in place of the factory part. Before ordering, compare the photos and part numbers to your current sensor to ensure a match — fitting depends on exact component shape and connector alignment.\u003c\/p\u003e\n\n\u003ch3\u003eWhich vehicles will this HiSport kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis replacement kit covers a wide range of Toyota and Lexus models across early-2000s and late-2000s model years. The compatibility list includes many popular sedans, SUVs, trucks, and luxury models, but fitment is determined by the original part number and connector style.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLexus: ES330 (2004–2006), GS430 (2006–2007), GX470 (2004–2006), IS250\/IS350 (2006–2007), LS430 (2004–2006), RX330 (2004–2006), plus Scion tC (2010–2012)\u003c\/li\u003e\n  \u003cli\u003eToyota: 4Runner (2004–2009), Avalon (2005–2011), Camry (2002–2011), Corolla (2003–2012), FJ Cruiser (2007–2012)\u003c\/li\u003e\n  \u003cli\u003eAlso fits Highlander, Land Cruiser, Matrix, Prius, RAV4, Sequoia, Sienna, Solara, Tacoma, Tundra, Venza, and Yaris across specified years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I verify this part replaces my existing sensor?\u003c\/h3\u003e\n\u003cp\u003eConfirm replacement by matching the HiSport part numbers to your factory unit and visually comparing the connector and housing. The listing references replacement numbers 89615-06010 and 89615-20090 — if your old part shows these numbers, the kit is intended to be compatible.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCheck the stamped or printed part number on your current sensor housing.\u003c\/li\u003e\n  \u003cli\u003eCompare connector shape, pin count, and mounting flange to the product photos.\u003c\/li\u003e\n  \u003cli\u003eEnsure the harness length and clip locations match the factory routing in your engine bay.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I expect during installation and service life?\u003c\/h3\u003e\n\u003cp\u003eInstallation follows standard sensor-replacement steps: disconnect battery, unplug the old sensor, unbolt and remove it, then fit the HiSport sensor and connect the harness. The kit is designed for direct-fit replacement so no special programming is typically required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires basic hand tools and a safe jack or lift for access on some vehicles.\u003c\/li\u003e\n  \u003cli\u003eNo ECU reprogramming usually needed if the connector and signal match the original.\u003c\/li\u003e\n  \u003cli\u003eIf a check-engine light remains, verify wiring and ground continuity before replacing other parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat should I do if the part doesn’t match or has a problem?\u003c\/h3\u003e\n\u003cp\u003eHiSport advises checking the product pictures against your original sensor before installation. If you receive an item that doesn’t match or is defective, contact the seller directly for support or replacement to save time and cost.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eInspect the delivered sensor against your vehicle’s part prior to installation.\u003c\/li\u003e\n  \u003cli\u003eRetain packaging and photos to speed up any claims or support requests.\u003c\/li\u003e\n  \u003cli\u003eContact HiSport customer service for troubleshooting or returns if components differ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The HiSport 89615-B6010 kit is aimed at DIY mechanics, independent repair shops, and owners of compatible Toyota and Lexus vehicles who need an OEM-style knock sensor replacement without dealer lead times. It's suitable for anyone who can identify the existing part number and perform a straightforward swap or who works with a technician that can.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does this kit replace part number 89615-06010?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes, the HiSport 89615-B6010 replaces 89615-06010 and 89615-20090 when the connector and housing match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will I need ECU programming after installation?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Usually no programming is required if the replacement sensor and connector match the original equipment.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"HiSport","offers":[{"title":"Default Title","offer_id":48086470918302,"sku":"B0DKMNYY6T","price":42.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/2041\/9486\/files\/hisport-knock-sensor-front-view.jpg?v=1785898853","url":"https:\/\/northtrailauto.ca\/products\/hisport-knock-sensor-harness-kit-for-toyota-lexus-89615-06010-direct-fit-replacement-oem-style","provider":"North Trail Auto","version":"1.0","type":"link"}